👋 Всем привет! Эта тема является публичной, поэтому давайте будем вести себя вежливо и уважительно. Никакой рекламы, спама или гадостей!
🇺🇸 Страна пользователя: Соединённые штаты
🌐 Предпочитаемый язык пользователя: Испанский. Вы можете переводить онлайн через DeepL.
💡 Вы имеете в виду конкретную модель? Добавьте ссылку, название или номер модели.
🖼️ Хотите разместить фотографии? Используйте бесплатный хостинг типа ImgBB и вставляйте ссылки в сообщение.
✍️ Советы по написанию**: Используйте формат Markdown, чтобы структурировать текст и сделать его более читаемым.
Hello.
Purchased your T-490A-MV "Avangard" file and printed the first file 'chasis 1'.
I assumed this was at 1/72 scale but it seems very big compared to a T-64 with similar running gear.
Is it 1/56 scale?
Can you confirm the scale please.
Thank you.
Hi mate, thanks for your purchase. My city has just been hit by a powerful hurricane and I'm having power outages, but I'll do my best to get it checked out as soon as possible. I hope you'll excuse any inconvenience this may cause.
The chassis size at 1/72 scale should be 11.5cm. There's a version for display on the website that shouldn't be at the correct scale. If that's the case, then it's my mistake and I'll try to correct it as soon as possible.
Thank you. Hope your city gets back to normal soon.
Hola, vi que publicaste la Aegis. Lastimosamente en el momento sinceramente no cuento con el dinero para comprar el modelo. Pero ten por seguro que si en un futuro puedo costearla de seguro la compraré. Quedó genial el diseño, felicitaciones.
tranquilo, escribeme al correo te dare un descuento epico, parecera un regalo, a cambio cuando la imprimas subes un make, trato?
Claro que sí, es un trato. Te seguí y escribí en LinkedIn porque no sé cómo ver tu correo por acá. Muchas gracias
Which scale is the data?
which of them
sry the Taifun-U КамАЗ-63968
1/72 my friend
Hi!
I just bought your nice 1/72 "Russian Missile Multirole Pack A", but the torpedoes supposed to be in the set are missing from the files.
Hi, love and bought your AEGIS Trirreme class Imprerial Warship. Am i missing something or are the exterior rings STLs just the interior Rings and the exterior Rings are missing?
Hi, thank you very much, I'll check but the outer and inner rings are completely different pieces.
I see that the STL of the outer ring was missing to upload, don't worry I will upload it immediately, today I will be updating the ship to add some details to the weapons
Great, thank you
If you would like a personalized base with your name, write to me at the email
I purchased the Objekt 490A-MV "Avangard" which seems to include 2 sets of files
The proportions are also quite different
What are the specific proportions
Hello, first of all, thank you very much for the purchase. I've added two sets of models for Cults to generate previews. The ones that weigh a few MB are for display only. The heavier ones are ideal for printing. They're at 1/72 scale. If you have any questions, feel free to write. I'll try to answer as quickly as possible.
¡Hola! Les compré el Object 695 / IFV "Kurganets-25". Pero hay un problema: la torreta y el cañón ocupan 1,6 GB. El rebanador se queja, y quiero imprimirlo en una impresora SLA. ¿Podrían reducir el tamaño del modelo a un poco menos de 1 GB? Les estaría muy agradecido.
Hola, gracias por comprarlo y por escribir y disculpe cualquier molestia que exista, Intentare solucionarlo lo mas rápido posible, puede que hoy mismo pueda tenerlo.
¡Gracias!
Pero aún me encantan tus modelos. Son detallados y fieles al original. Espero que sigas deleitándome con tu hábil e interesante trabajo.
hermano, ya casi esta listo el kurganets, muchas gracias por esas palabras, ayudan mucho a mantenerse dando lo mejor
¡Hola, amigo! ¿Cómo vas con tu trabajo en la torreta Kurganets? Tengo muchas ganas de ver los resultados. Seguro que te irá genial.
Hola buen dia, no la habia podido subir puesto que no tenia ni fluido electrico ni internet en la ultima semana, pero entre hoy y mañana estara lista, lamento la demora, ha sido algo que ha ocurrido en todo el pais y me he visto afectado, espero entre hoy y mañana subirla sin mas tardar, pues ya esta hecho el arreglo
gracias por la espera y reitero las disculpas por los problemas.
Hola, he subido una version mas ligera de la torreta, puedes probarla si aun persiste tu problema escribeme sin falta, gracias por la paciencia
¡Hola! ¡Gracias por tu trabajo! Espero ver más modelos interesantes tuyos.
I bought Russian Missile Multirole pack A, did you print these on a resin printer? I'm getting hundreds of manifold errors on each one, and when I slice parts disappear. Using .25mm nozzle, .08 layer height. Orca slicer. Thanks.
Hi friend, I see from what you're telling me that you have a situation. I just checked. It seems that the printable files weren't uploaded correctly. Those there are the sample ones so the page generates the thumbnails. I've previously printed them without problems. Please allow me to upload the correct ones and try again. Sorry for the inconvenience.
Hey thanks, that's a lot better now
I'm so glad, I hope you enjoy it and find it useful. Thank you so much for this.
I just bought the super Pershing, what scale is it modeled in? cant very well make it larger into another scale and be accurate if we dont know the native scale.
Hello, thank you very much for purchasing the model. We'll answer any questions you may have. Reviewing it now, I noticed that the current chassis length is 12.600 mm.
* For a 1:72 scale, you must scale it up to 120.400 mm (12.04 cm).
* For a 1:35 scale, you must scale it up to 247.14 mm (24.7 cm).
Hello, I’d like to know if your Foundation ship model pack includes the model of The Aegis. I know it’s listed among the models, but I’d like to be sure since no photos have been published. Thank you very much.
Apenas leo que hablas español, también yo. Jajaja
Te dejo lo mismo de arriba:
“Hola, me gustaría saber si en tu paquete de modelos de naves de Foundation tienes el modelo de The Aegis. Se que está listado en los modelos, pero me gustaría estar seguro dado que no hay fotos publicadas. Muchas gracias”
Hola amigo mio, jajaja si hablo español, realmente me disculpo fue un error de mi parte al subirlo, como el nombre aegis me gustaba mas asi la nombre sin darme cuenta que la estaba subiendo con el mismo nombre, no obstante ya estoy trabajando para traer tambi{en la Aegis y mas adelante la Shining destiny, invictus, y las naves susurrantes de la fundacion, si esperas un poco podras aprovechar que siempre subo los modelos con un gran descuento inicial
Fantástico. Estaré esperando entonces por la Aegis. Tengo una impresora 3D y puedo aprovechar para enviarte fotos de cómo queda porque seguro que la imprimiré. PD: también la Shining Destiny. Muchas gracias, son impresionantes tus diseños 💪
PD2: si de pronto pudieras enviarme algún tipo de notificación cuando subas el modelo te estaría súper agradecido. Si quieres también puedo darte mi correo. Es que acá entro poco y creo que no llegan avisos al correo.
PD3: ya vi que sí llegan notificaciones al correo. Entonces un aviso por acá creo que bastaría. Quedo muy atento, muchas gracias
Yo la Aegis la tengo practicamente terminada, solo faltan ajustes menores. cuando la imprimas, estare encantado de ver esas fotos. seras el primero en saber cuando la suba.
Hola, buen dia, queria comentarte que la AEGIS esta disponible y con un descuento inicial
hola amigo, escibeme al correo para darte un codigo de descuento epico para la Aegis
Object 490VA What is the scale of the project?
1/72
If scaled up to a 1/35 ratio, what would the effect and details be
I modeled the tank with a high level of detail, so that it can be printed not only in 1/72 but in larger scales, you simply have to adjust the size according to the scale you want, but the details should not be affected, everything is modeled with high detail.
Thanks friend, I hope you upload more excellent tank models, greetings
Okay, if you could let me know by email when you upload them. Thanks.
my Friend, The parts has been Uploaded
and the front lights of the M1150 are missing too
ok I got it
This way I don't end up with an incomplete model...thanks
I'll upload the pieces soon, don't worry.
The M1150 is missing the files for the front fenders and the auxiliary units that go on the rear of the body. Could you add them or send them to me? Thanks.
No problem, my friend, I'll fix it and upload them. Thanks for letting me know. It seems they weren't uploaded correctly.
Hi, could you add a solid version of the foundation rubicon ship? Would be much appreciated
Hello, thank you so much for your purchase first.
And of course! I'll do it as soon as possible.
Hi, can you print Object 490 in 1/72 scale for sale?
Of course
Hi, would you sell the actual 3D-print of your Object 490?
Of course, but how would I get it to you?
Simple, I'll give you my address. How much would you charge for the model and shipment? I'm based in Poland.
Friend, we live on different sides of the world. The shipping cost alone would exceed the cost of the model, plus the paint and everything else. What can we do? If you want, I can recommend someone who lives a little closer and whose work is very high quality.
Thanks,
That would be great!
Keep up the good work!
Peter
Hello maby next 1/72 P-40 Radar Armour Long Track >?:)
Oh interesting project
Hi
I have just received the updated file for kurgunets 25, reference version
I was wondering if you could produce the other two turret versions, they should make for great wargames size models
Thanks for your consideration
Peter
P.s great models, I have several other of yours!!
Hi Peter,
I'm very glad to know you own several of my models.
Yes, of course. I can produce the other reference turret versions for you if that's what you're asking for.
Hello
I have just purchased the bmp sosna model, is this a particular scale?
Thanks,
Peter
Hello Peter, thank you very much for your purchase.
I don't have a specific scale, but the level of detail I gave the model works for both 1/72 and 1/50. Some friends of mine have printed it in these scales without any problems. Also, if you have any problems with the model, contact me. I'd be happy to help with anything you need.
regards
Vbertz
I just bought your obiekt 490a mv , what scale are these? Why is there zero info on scaling on both the files page and after? Why are there two different sets of files with zero info / scaling info?
Hello, first of all, thank you so much for your purchase!
My sincerest apologies, I just updated the model to separate the STL files that are for previewing in Cults from those that are actually for printing. I also updated the scale in the description, even though the model is scaled to 1/72. My apologies for any inconvenience this may have caused.