423 комментария

Thank you, and a Happy and Healthy holiday season to you.
BTW, I've been quite negligent in keeping up with Good people like you that I've met along the way. Just getting old!
Teamwork, Steve

You did not mention which model!
Sometimes I post one-piece models and they would be titled "model - Onepiece'
I also post multimaterial models which can be printed in onepiece, titled "model - MMU"
Teamwork, Steve

sorry it was the Cheshire cat

Thank you for reaching out. I make models most requested by the makers, so, I will put him on the list and see if I get any other requests.

Teamwork, Steve

I posted the model in separate pieces, since I model so slowly. Elmer is under:
https://cults3d.com/en/3d-model/various/elmer-fudd

If search does not pull up my models, just go through my profile to see all my models.

Teamwork, Steve

I appreciate your kind words. If you ever consider modeling and want some help, do not hesitate to ask.

Thank you so much for reaching out and your very kind concerns.
Fortunately all is well here. I started Rocky and Bullwinkle and then put it on hold for a person request. I did that and then back to Rocky and was pulled aside for another personal request! And then the wife wanted out 'one-of-a -kind' 3D printed holiday card designed and printed!
I just got back to Rocky and bullwinkle and am now 80% done with it.
FYI-Printables,com has a 'community' section, and if you follow me there, I post my next model decision and some work i progress pictures and status. I post very little but it will give you a chance to see where I am on modeling.

Again, thank you for reaching out. You are not the first to ask if everything was OK! I doo not do many personal project but do accept them from time to time and offer my time for free.

Teamwork, Steve

I replied via email from reddadsteve@outlook.com

Thank you for reaching out. I recall seeing a good one already. I use yeggi.com to search for models:
https://www.yeggi.com/q/flintstone+house/
Teamwork, Steve

Tazz

Please read the writeup. There are two Taz models posted. One has all the main parts and the other one is just the parts for a second version of him.
Teamwork, Steve

Best way to go about it is to use a printing service. I've worked with starlabs.com from time to time since they are familiar with my models. It depends where you live, since shipping can be a big part of the process.
Let me know if you need more information.
Teamwork, Steve

I'm just back from an 'off the grid' vacation and am trying to catchup.
Typically any fitting issues would be related to the first layer being 'fat'. Slicers have a parameter to compensate for the fast first layer.
The other possible issue is if the parts are warped due to poor bed adhesion. The bed side of the parts need to be completely flat and not bowed. Place them on a flat surface to test.

Let me know how you make out.

Teamwork, Steve

Grr.. I wrote a full response but was not logged in and lost my response!!!!!!!!
Anyway, yes it is the optional base. My writeup contains:
"base (optional for display purposes, bike stands nicely without it)"

If you have the time, post your make or send me pictures at reddadsteve@outlook.com

Teamwork, Steve

Thank you. I just reported the post.

People like you make the world a better place.
FYI-I got your message on Thingiverse as well.
Teamwork, Steve

Thank you for reaching out. Always good to hear from you and seeing your Avatar. Enjoy!
Teamwork, Steve

Iznogoud is a good suggestion and goes on the list, but I choose my subjects based on the number of requests.

Teamwork, Steve

So many great characters to make! But I tend to make characters that are requested the most. These will go on the list and let's see where it goes.
Thank you for reaching out.
Teamwork, Steve

I just checked and it is in the parts list. I also went to edit the part to add it and found it is already there. Can you try downloading again?
FYI-I post all my models on Thingiverse, Printables, Cults3D, Makerworld and Makeronline.
Teamwork, Steve

Thank you for reaching out with that.
Unfortunately, with so many 'bad actors' out there, I've given up trying to chase them down. My health is more important. The type of person who is willing to steal and sell a model is generally not the type of person worth reaching out to. I've also found that trying to contact Ebay and Etsy on takedowns is also more aggravating than it's worth.

So, thank you but just enjoy the models and spread the word.
Teamwork, Steve

Thank you! Funny thing about Gazoo, there are many people who really dislike him due the fact that he did not fit into the Flinstones world properly.
FYI-On Printables, I post my next character choice and some work in progress. If you follow me there, under the community tab the post will show up.
Thank you for all your support of my work.
Teamwork, Steve

Thank you for reaching out. Did you unzip the file? Once unzipped, just upload the individual STL files.
I also post on Makerworld, and even though there is probably no H2D print profile, you could use another print profile to get started and just change your machine type.
Teamwork, Steve

Hi Dennis,
Funny thing, that happened to me once on another model. In my case, even though to model sliced properly the printer kept stopping at the same layer height. I wound up simply rotating the model by 45 deg and after reslicing, it then printed fine. The only thing I was able to think of is that possibly a firmware bug or a bug in the slicer. By rotating the object, the slicer redid everything differently, even though it looked the same.

I've been printing on different machines for over 10 years and it only happened that one time for me. I did pint a tall cube at the same height just to prove to myself that it was not a hardware error.

Let me know how you make out.
Teamwork, Steve