/https://fbi.cults3d.com/uploads/user/avatar/16369076/unnamed.jpg "ibc")
Hi! Just a mountain biking tech enthusiast from Australia.
If you've used one of my designs & would like to give back, please consider a small donation to buy me a coffee! Cheers :)
👋 Всем привет! Эта тема является публичной, поэтому давайте будем вести себя вежливо и уважительно. Никакой рекламы, спама или гадостей!
🇦🇺 Страна пользователя: Австралия
🌐 Предпочитаемый язык пользователя: Английский. Вы можете переводить онлайн через DeepL.
💡 Вы имеете в виду конкретную модель? Добавьте ссылку, название или номер модели.
🖼️ Хотите разместить фотографии? Используйте бесплатный хостинг типа ImgBB и вставляйте ссылки в сообщение.
✍️ Советы по написанию**: Используйте формат Markdown, чтобы структурировать текст и сделать его более читаемым.
Hello one question
Are u able to change the GOPRO HERO 9/10/11 VERTICAL FRAME MOUNT a little bit. I want to put the go pro vertical on my drone but with the lense pointing downwards.
I could do - what change would you need, extending the mount point out a little longer, or moving it up/down?
Hello IBC, thank you for your design for the gopro mount on the fox proframe.
But i have a question about this one, i printed it but when i put my gopro and i fix it, there is a littel space. Is like the mount is to big for my gopro hero 9 and i can t squeez it.
Maybe i need to take the V2 ?
Where can i find this older version ?
Thank you for your time 🤟
Hi there, unfortunately I can't win either way - I have also had people say that it was too tight and they couldn't get it to fit. I add a 0.2mm clearance to most of my designs as that's approx what works for most people, but due to the nature of 3D printing, everyone has varying degrees of horizontal tolerances with their printer.
I would recommend changing Horizontal Expansion in your slicer (XY Size Compensation in Prusa Slicer) to +0.1-0.3mm or so which should close the gap. You may need to play around/print&test with the setting to find the right size.
Ok, thanks 👍
Hi IBC! I just got a request to print your vertical frame for GoPro vertical mount. Wanted to ask what amount you consider a proper tip for this design so I can include it in my quote? Thanks.
Hey, thank so much for getting in touch! Whatever you feel would be appropriate, a small amount to help cover my coffee for the morning would be more than enough :) Thanks
/https://fbi.cults3d.com/uploads/user/avatar/1512792/Tred_New-01.jpg "Trede")
I want to mount the camera rotated by 180 degrees. U have the lens at the top and i would like the lens of the go pro to be at the bottom. I think you would only have to do the exceptions you made above for the lens downside.
I hope u understand my English is not the best 🥲
I could do that, however you will not be able to access the power button?
Yes it’s no problem