61 комментарий

Just follow the photos , real easy build , let me know how you get on , I'm on holiday so won't be back for another 6 days , cheers

It was more about the bottom panels and the switch plates, didn't see where they fit, you say see the pictures, have I missed these somewhere when I downloaded or are they in the zip files somewhere

I apologise i have since found your youtube guide and watching over it, many of my questions were answered, I will speak to you after your vacation

Around 320mm just the head

Don't think the thunderchild will down size well , any thing with a thin wall thickness at full size 600mm+ will be to thin to print , I could cut the hull so it's not as tall for your printer as I belive that would probably be the biggest part, but that's still the full size print , I do have a smaller version that comes with the tripod, less detail , hope this helps

I think the ESB AT-ST is a unmanned walker, so body is shorter than the return of the jedi walker, so no ,

cheers , a nice post to read after getting out of bed :-)

posted separated files . hope this helps

box files added, will look at rest after work , cheers

I'll have a look when I get home , side weapon and taking the mounts off top rail

Thank you very much! It will let me re-support and reprint just the specific single pieces (groupings titled "HEAD merged version head full", "HEAD BOTTOM .MAIN GUN RESIN" and "ROOF RACK. NECK. RESIN" being the ones that are having print failures for me on some of the parts) . If it's easier to just upload the kit's individual part stl's instead of hunting for the specific ones I'm happy to sort through them myself. And thanks again for the assistance, I'm looking forward to weathering this thing in full OCD fashion. . .

loaded up under separated files, hope this helps

Thank you!

Thank you again, one request/suggestion if it's not too annoying. The stl for the cockpit interior assembly guide prints out beautifully on its own. If that was available without the two drivers it would be a super-easy way to print the cockpit without assembly which would make this an easy build with your combined parts.

What print you looking buddy, if it's fdm printable then I'd have to say yes

Should be fine , I'd lower your layer lines as low as you can go .12 or similar on detailed parts , I have gone for both fdm and resin as I'm getting older and hand get a bit crampy with all the sanding on small details

What model are you looking at , cheers

star bug accurate

There is a led holder in the files , and all I used were Xmas lights that were battery operated, and put them in the back of the head and put a cut out of a pc motherboard on top, I think I spliced another separate switch that I put on top of the motherboard, iv now cut the wires that go to the battery and cut a cable of a phone charger and just wired them together so I can run him on a PowerBank , hope that helps

Not at the moment, cheers

https://cults3d.com/ru/3d-pechat/terminator-t600-1-1-bust-screen-accurate

a lot of other parts are a mix of sharper details and terrible details.
https://i.postimg.cc/1RqcgqjL/Screenshot-2025-03-30-at-23-34-46.png

Iv printed a few now and can't say iv noticed in the final model, I'm looking at mine now and still can't see any thing your pointing out , it's a war machine , look at any tank or plated armor it never perfect so never really bothered me " just my opinion " .... sorry to hear your not happy

The problem is parts having sharp parts and unsharp parts, the unsharp parts are due to bad STL compression from the CAD software you are using.
https://i.postimg.cc/FzWjqzj3/Screenshot-2025-03-30-at-23-34-46.png

I am sorry to say, I want a refund.

You will have to go through cults3d I'm not shore I can from my end

I am really sorry about this, but you should practice a bit more with building models, when exporting the basic shape you make, before applying details should also be save at a high quality/resolution, the same as the details you will apply later, this will make you parts look a lot better.

I'd be worried if it affected the finished product but I'm looking at the end result and I can't see it , sorry your not happy , but I still recon for the price your getting a pretty cool model " just my opinion "

Cheers , I'll keep it in mind on my next build

looks like i didnt repair files after i cut them . sorry. updated files and added shocks . should be good to go , cheers

just don't see a down load link for the updated files

I have updated the last files so just re-download the same ones

i hate to be a bother. but the build plat of your bed is much wider than mine. i need to have the parts much closer together. and need to have the bottom plate split in half so it will fit my build plat. again, terribly sorry for the inconvenience.

In the file I up loaded the skulls are stacked together to fit a 252x252x302 bed size the bottom base has been split into 6 pieces with the biggest one to fit your printer all in separate files so one piece per file as are the shocks , they are separated front from back and separate sides , they are all there and checked to fit your printer , not shore your looking in the right folder :-/

I want to thank you so very much. I found the folder you marked for me. I just didn't look far enough in the folder. I just thought you amended the exiting ones. Again Thank you for bearing with me. Can't wait to get it printed.

All good , happy printing

thesyfyguy

Greetings,

Two things first, I am still printing the model off. Having issues printing the shoulder units out. In you photos you show them as exploded views. But when they are printed off. The parts are fuel together. I can't remove the pin to attach it to the neck unit. Candy you separate those parts so they can be printed individually? Thank you.

Second have you started designing the K-9 2.0 yet. I am trying to build a full size one?

I'll look when I get home after work , cheers

Thanks, I tried printing the shoulder units. But I couldn't remove the pin to attach it to the neck.

files downloaded .same name on folders i just added SPLIT at the end . stopped doing K-9 as there are some really good files availableso no need to make one , cheers

Thanks, got the files. But I think your not understanding which K-9 i am referring to. Its not the K-9 mark II. I was referring to the K-9 2.0. This one is off the spin off of dr who. Its called K-9. You can watch it on you tube. I have seen no stl files for this version. Its not the one commonly seen. This one flys instead of rolling across the floor.

Cool cool cool I'll have to have a look ;-)

In the file I up loaded the skulls are stacked together to fit a 252x252x302 bed size the bottom base has been split into 6 pieces with the biggest one to fit your printer all in separate files so one piece per file as are the shocks , they are separated front from back and separate sides , they are all there and checked to fit your printer , not shore your looking in the right folder :-/

Send me your printer size and I'll have a look

its an Ender-7 X=252/ Y=252, Z=302

How good are you at Making 3D prints off of photos? I am working on the newer version of K-9 off of DR WHO?

Funny , next on my list , after twiki from buck Rodgers, printing him at the moment to make Shore it's good to go in the shop ;-)

done . found only the base and the neck base didn't fit .hope this helps , cheers

it was the bottom base, top base and the skulls to big to fit on the build plat. if the top and bottom base were split in half i could fit tem on the base plate. and if the skulls were grouped closer together they would fit.

The front skulls are separate The rest fit you bed size , new files posted , cheers

wish there was a way to share photos with you. as the skulls are they have a lot of dead space between them. that makes impossible to fit them on the bed. even when i reduce the scale to 70%. the same goes for the bottom base and the neck base.
this minute

Have you down loaded the files with the base and neck re cut for you , as they fit your printer bed , and I have checked the skulls and they should fit as the front skull is removable, I'll have another look to make shore when I get home from work , cheers

Have you downloaded the new files for you ?

Hi , thanks :-) no worries swapping files with friends and making them , no Patreon at the moment, maybe one day ;-)cheers

Give me a little time , I have family over at the moment and I'll chop it up to fit your printer and post it , I'll message you when done , possibly Saturday:-)

Thank you soo much! I appreciate it!

So looking at your printer size I'm guessing it's a resin printer :-)

DONE. uploaded file ;-)

Yes, it’s a resin printer. I really appreciate this!!!! Thank you thank you! I will give this a go once I figure out why lychee crashes during slicing. I’ll let you know how it comes out!

NAILED IT!!! looks amazing . nice job

thank you!!!! I am waiting for your project on the Terminator T-600 statue!!! in full height !!! I'll be happy to print it!!!

I've just finished twiki from buck Rodgers so printing him at the moment then I'll list him and maybe I'll start the rest of the T600, see how it goes as it's a massive job, cheers

Thank you master!!!! I'll be waiting!!! I really want to keep it unprinted so that it pleases the eye

Hi , any chance of posting a make on the t600 , don't get many and yours looks mint, cheers :-)

yes

Hi, what model are you referring to , cheers