Hiya,
Yes, there are two skeleton parts in the SmallParts.zip. Coffin with a skeleton on top and a separate lying one. Hope that helps! Let me know if you can see it. Best, NE
- 0 мне нравится
👋 Всем привет! Эта тема является публичной, поэтому давайте будем вести себя вежливо и уважительно. Никакой рекламы, спама или гадостей!
🇬🇧 Страна пользователя: Соединённое Королевство
🌐 Предпочитаемый язык пользователя: Английский. Вы можете переводить онлайн через DeepL.
💡 Вы имеете в виду конкретную модель? Добавьте ссылку, название или номер модели.
🖼️ Хотите разместить фотографии? Используйте бесплатный хостинг типа ImgBB и вставляйте ссылки в сообщение.
✍️ Советы по написанию**: Используйте формат Markdown, чтобы структурировать текст и сделать его более читаемым.
Напишите ваше сообщение:
20 комментариев
Hi. Is there any way to get this file but with the Skelton with it?
- 0 мне нравится
Hi, yes, the quarters of the below measurements, therefore one side is 250 minimum.
- 0 мне нравится
hi there, i do not understand if the sizes you have quoted in the previous messages are for the full diorama set or for each quarter? how big a plate do i need for eaach quarter?
- 0 мне нравится
Balin’s Tomb – Complete Diorama Set at Wargaming Scale — what kind of print bed size is needed to print this? Looks like the're 4 quarters, but I'm not sure if will fit on a standard 220mm x 220mm plate
- 0 мне нравится
Hi, yes sorry for the delay in getting back to you. I didn't have the full dimensions on the advert,
Height - 280 mm
Width - 500 mm
Depth - 450 mm.
So it may not fit exactly if they are a quarter of this overall size. Of course, you can just reduce everything to fit as necessary.
Thanks for getting in touch, NE
- 0 мне нравится
Hiya! Thanks so much for the purchases, that's great. Yes, I am sorry to see there was an issue with the Tower and the figures. I will rectify as soon as possible and get it uploaded for you... Cheers, NE
- 1 мне нравится
Thank you so much!!! And your quick reply is much respected!
- 0 мне нравится
It's done!
- 0 мне нравится
Hello! Thank you for your great work. I purchased the Rivendel model and one of the statues in the broken tower piece seems to have another statue behind it merging into one. Is it possible to resolve this issue somehow and make maybe a seperate version with the statues seperate from the tower to be able to prin them in resin? Thank you again! Keep up this amazing work!
- 0 мне нравится
Hi, I saw your amazing work. The Rivendell building is amazing, I'm trying to print all the buildings to recreate a complete diorama of the city. Do you think you can do the other buildings too? For example the central palace with the high tower?
- 0 мне нравится
Hi, thanks for that!
- 0 мне нравится
Yeah, i have another guy asking this! It's complicated to do but if there is demand! I am going to be very busy working on some large commissions though, so we have to see if I have time. I can't promise but I will definitely consider! Best, NE
- 0 мне нравится
The new black gates look amazing with the hinges and trolls! Great work!
- 0 мне нравится
Thanks man! Complicated thing it is...
- 0 мне нравится
Hello. I just purchased your GALADRIEL’S ENCHANTED GROVE model. Neither the stair statues nor the mirror are included in any rar.
- 0 мне нравится
The water jug is not there either
- 0 мне нравится
Gosh, yes, so sorry I was a bit hasty. Can you give your email and I will send! Sincerest apologies! NE
- 0 мне нравится
I saw that you uploaded them separately, and I was able to download them. Thanks for the quick response.
- 0 мне нравится
Ah, great stuff, all good! Let me know how it goes with printing etc!
- 0 мне нравится
Hello. Is it possible to purchase the Hadhafang Sheath decorated parts like the top and bottom parts? I would like to make the main sheath out of wood.
Kind regards.
- 0 мне нравится
Hiya, thanks for the interest! Yes, as you can see, the parts are all provided separately. Just download and use on your own sheath. You would need to make sure your sheath is exactly the same size and profile so that the parts will fit nicely. Good luck and do let me see how it goes! Best, NE
- 0 мне нравится
Thanks a lot for the purchase! I hope the printing goes well.
- 0 мне нравится
Hi, still valid the hollidays offer for the Ravenhill enviroment with the signals?
I don't see your designs until today
- 0 мне нравится
Hiya, thanks for the interest. Yes I haven't increased the price since then. There is also a more economic package wth signals and building combined. Cheers, NE
- 0 мне нравится
This is which one I mind, the combined one. Can you point me to the right direction, I only find models alone in your list
- 0 мне нравится
Hi, yes, here is the combined package: https://cults3d.com/:2719044
- 0 мне нравится
Well, I ask becuase here you comment that the bundle normal price is 36€ (https://cults3d.com/en/3d-model/art/ravenhill-signals-pack-command-the-battle) and in the link you provided says 35€ (or is what I understand)
- 0 мне нравится
Sorry, yes the package is 35 at the discounted price.
- 0 мне нравится
Hi, I'm interested in buying Ravenhill Fortress and Ravenhill signals pack. Can you offer some discount? Are you planning to have other unique terrains, for example Mount Doom (only architectural motifs without a complex mountain range), Gundabad Tower? Best regards, Robzzy
- 0 мне нравится
Hi Robzzy, thanks for the interest in Ravenhill. I was planning on increasing the price after a holiday offer. But what I have done is a combined offer so you can get them both for a better price. I want to print them up myself to see how they might paint. Cheers, NE
- 0 мне нравится
Hi there, thanks for the purchase! I would say STL and OBJ are similar, STL doesn't have colour information, but it is easy to convert to OBJ if you need to. Just use Meshmixer or similar. Sorry about that but all programs/slicers etc will accept OBJ.
- 0 мне нравится
Hello, Just bought teh Sauron Dagger file for 3d Printing, its doesnt have STL files please?
- 0 мне нравится
What scale is the Revendale command post?
- 0 мне нравится
correction, I meant Ravenhill.
- 0 мне нравится
Hi there, thanks for getting in touch. This is wargaming scale, illustrated by a 30mm man on the top as you see. I am going to print one myself shortly! Best, NE
- 0 мне нравится
Hey I bought your high elven helmet and I was wondering if you could give me some suggestions for slicing/printing it on a bedslinger. I'm fairly new to 3D printing but doing this as a gift for a friend.
- 0 мне нравится
Hi, yeah I am using one here now as it happens. I needed to get some large things done. I would suggest that you keep the layer height right down for capturing all the details in this. 0.2mm maximum. If your printer is large enough then print the whole halves not the quarters. If you can print the whole helmer part, even better. The comb has detailed edges which you want to try preserve. Print those at angle... Hope it goes well! Post pics! Cheers, NE
- 0 мне нравится
Hi, i just purchased your Gil Glad shield files, is there any chance you could export a decimated version and send it over? the file is so huge my laptop is incapable of opening it, thanks!
- 0 мне нравится
Hi, yes, sorry about that! I just like to keep things as detailed as possible but of course it can be decimated further. Do you know how I can send it?
- 0 мне нравится
hello testing
- 0 мне нравится
Hello, I was hoping you might add a few more LOTR projects you have completed in your Youtube videos like the Rivendell mural frame and the Rohan Royal guard shield as I'd really love to purchase these files.
Hiya, thanks for the query! I shall endeavour to fulfill your wishes! Maybe there is time over Xmas to see about those... Best regards and happy holiday! NE
Much appreciated, thanks!
Probably a busy holiday, hopeful for some more models in the new year?
Yes, I am on it!
Cheers and Happy New Year!