29 комментариев

I didn't has a 1/144 GN-XII T-T

hmm ok nope... thx for info, maybe i waant to remake this file for 1/144 :3 thx bro

I just paint it :)

wow amazing thin look loke a colored print

In theory, it should work since the design was based on the HG version. But the joint sizes still need to be checked, because sometimes the scaling ends up slightly off when attaching it to an HG kit.

I can do it, but normally the thickness of the paint layers will help make the fit snug. Alternatively, you can just use glue—it’s simpler.

ouh ok... I'll try

nope

“I tried working on it, but it would require redesigning all the arm joints; otherwise, the arms wouldn’t be able to lift. So I didn’t continue with it.

Ah I see. Thanks for telling 👍

scale it up about 144% +-,It will be a size for 1/100 :)

you can look at this file I adjust it for 1/144.
https://cults3d.com/:3295926

MG GUNDAM HEAVYARMS EW :)

no you need to paint it yourself

you can do it in slicer program for 1/144 scale is about 70-75% :)

I'm afraid of making mistakes cz i dont have Slicer :D

when you about to print you can adjust a scale make sure you scale all the parts

As far as I know, Abulhool is smaller than Kyrios, so I'm afraid of being wrong if I change it myself

Elegoo S4U 12K

Umm can you make it free bcs i want to test it out for fdm

Not recommended for FDM printing, as most of the details will be lost.

Um i wanna try it too on fdm did you try it on fdm before?

“I haven’t tested it with FDM since the details were designed for resin printing from the start, but you’re welcome to try it yourself if you’d like.

I sell physical product in my shopee but available only in selected country (Thailand) you can search my shop name in shopee if it not shown then you need a 3d printing service in your coutry :)

I I’ve already attached the PDF manual in the files. Please check it first, and if you run into any issues, feel free to ask anytime.

From checking the original file, there’s only one version. In the photo, I sanded down the excess parts and hand-drew the eyes myself

sorry for that, For some designs that don’t have many parts, I won’t be making a separate manual. For this one, you can simply refer to the posted images — the assembly is quite straightforward.

I just upload a manual :)

Thank you! You are awesome!

I sell printed kits only within my country (Thailand) and on Shopee, which is limited to specific regions for ordering. If you’re outside the supported zones, it might be more convenient to purchase the digital file and print it yourself.

If you don’t mind waiting, both the 1/100 and 1/144 versions of Sadalsuud are already in my plans. It just might take a little time to get to them.

hmm ok.. maybe i'm wait 1/144 dynames saga first :D

IThat’s quite a large project, and I don’t have the "RX-78-2 Master Grade The Origin" on hand for testing. So I’ll have to pass on this one for now.

and do you have any other rx782 master grade kit on hand perhaps ?

don't have any mg rx78-2 on hand

darn, well if this ever comes to change, let me know

on the plan, but need to finished for 1/100 first

im waiting for it :D

and if u have 00 gundam series 1/144, (not produced by B****I) i want it, for ex. 1/144 Kyrios Gust :D

I don't have it :)

Thx for the comment, It already both monoeye and gundam eyes in the same model you can print 2 of it face and switch like you want. like in this only head link that I colors those eyes seperated
https://cults3d.com/en/3d-model/game/dijeh-traversia-conversion-kit-1-144-scale-only-head