3 комментария

there no linking piece to chain

One mount is mounted with the screws of the bed. The other one with slot nuts. Both mounts just have a opening for the dimensions of the cable chain i used. As discribed in de discription. The mount for the mainboard is not included, also stated in the discribtion.

may i have a closer picture of the chain link set up connected

Included one pic. Cant help more. Printer is sold. Its al straight forward

dude i just printed a bed full of these chains you aint helping how to link them shouldnt there be another piece to link them together your picture dont look like screws linking together looks like another piece to link

Full bed of chains? Dude, as stated in the design i used a cable chain wich i bought! I didnt include the chain in the file.Thats why i mentioned the dimensions of 16.5mm x 16.55mm chain. If you print your own chain, thats fine. Outside chain should be 16.5 x 16.5mm. There are no screws needed. My chain is just press fitted in the mounts. You can glue the chain in the mount, i didnt do that for future changes.

On the front below the display. Just re use the original switch. Its all in the picture. The 2nd switch i used for external component, such as a led to watch my nozzle. You mean aluminium corner profile. They are mounted on the inside of the 2020 extrusion. Wich allows you to put a piece of wood or other material of your choice on top of it. This makes a seperate compartment. I have a short on youtube. Just search for ender 5 electronics enclosure and you will find it. Hope it helps. If it doesnt, just start printing and building, it will explain itself.

cheers

Base plate? The plate wich i mounted the internals on? If this is the case i made this from a sheet of wood. Easier. Fans i used are 12v silent 80mm fans. Used buck converters for the fans

thanks and where is the top pannel dxf file or dimentions or 3d model