42 комментария

Bonjour je voudrais savoir les réglages pour le casque iron man pour l imprimante il me fait pas de belle pieces

I was looking through some of the Ironman helmets is there a link to the servo motors you used for each one?

whats the password for rar file

Hello,
I've downloaded your B2EMO RC Toy. It's fantastic and I'm having a blast. But for some reason, I can't figure out how to print the "Face" piece. I've tryed a lot of different setting, configuration and position. I even tryed with resin. But unfortunately the top and the bottom parts separate during the printing. I guess the wall in the middle is too fine for my printer. I have an Elegoo Neptune 4 Plus. Can you help me with some pointers on how to print that part properly? Thank you in advance. And thank you for creating such a great robot ! Amazing work !

Hello, please advise on the printing parameters for Iron Man Helmet.

Im interested in iron man mark 5 helmet. Can u provide me with obj or fbx file? I can pay for it

woher bekomme ich den sketch "ServoEasing.h

Hi, im Facundo Gomez and i´ve a project with the ironman helmet did you create. But i have a problem. The servos sg90 are so easy to get in Mercado Libre, beacause im from Argentina, but the servos (Wing Servo corona ds-239mg)
doesnt exist in this page and in other pages are so expensive. Did you know another type of the servos? Or if with the servos sg90 i can fix that? Thanks and have a good day!

Sur les photos du guide, je vois un condensateur de 10v 2200µF et sur la liste des composants, le lien renvoie vers une référence de 25v 2200µF
Pouvez-vous m'indiquer quelle est la bonne référence à acheter. merci

hey there. I'm currently in the process of building your iron man helmet. I'm wondering what gauge of wire you used. i see it says 26 gauge wire but some of the wires look bigger. any help would be appreciated. thank you

Bonjour je vous contacte car je rencontre des problèmes avec le programme voilà du servomoteur 5 à 9 aucun mouvement et effectué quand je regarde sur arduino (pc ) les ligne qui correspondent sont en gris clair donc je voulais savoir si sa venait de sa dans l'attends d'une réponse je vais faire des recherches cordialement

hallo,
vielen Dank für die super coole Datei mit dem Helm. Leider sehe ich in der Verkabelungsbeschreibung nicht wie die Drahte angebracht weden. Lötest du diese?

I downloaded your iron man mark 5 but I don't see any guides in the file like it says in the description

Hello, I noticed that a part of the brow side is missing, which unfortunately you didn't upload. It's just the right side, the left side is unfortunately missing

bonjour
avant tout merci pour partager ton travaille je suis entrain de imprimer les pièces est Jai remarque que manque une pièce ( eye ) peux tu me aider?? merci

Bonjour le code ne marche pas ça donne des erreurs comment je fait ???

What were your printer settings when you made this helmet like speed etc?

Bonjour sur le casque iron man il manque les yeux.je ne touve que un fichier stl. Merci

Interesante. Quiero un modelo que tenga una apertura mayor, y un mini ventilador muy silencioso a baterías recargables dentro del mismo, y con un arnés de sujeción igual que los cascos de obra.
Aceptas el reto?

e.fajardo1@gmail.com

Hello buddy,I would like to be able to contact you, I have in mind to do a project that I think would be great to work on with you, and maybe you can help me. It would be amazing if you can help and collaborate. Have a good weekend!

only one leg in your r2d2 ?

bonjour
j'aimerai avoir la liste des composants électroniques complète svp
avec les références exact !!
merci
cordialement
denis

on the iron man mk5 helmet, where do i get the wires and electronics from?

al descargar el fichero y descomprimir , dento haya otro que se pede descomprimir ???

I just messaged you on Thingiverse but figured i'd also message you here in case you check this site more often.

i'm getting an error when trying to verify and import your code. The code I'm using is from your "Iron Man Instructions with eyes.pdf" from your listing on cults3d.com. I'm using this one because I want the eyes to light up. I'm still fairly new to coding but it looks like none of the ServoEasing methods are being pulled correctly from the Servo Easing Library. I may have installed it incorrectly, i don't know. I simply went to Tools -> Manage Libraries and searched for ServoEasing. Only one library was found and it was by Armin Joachimsmeyer. the version is 3.1.0. I'm not sure which version you require. This created the "libraries" folder in the "This PC -> Documents -> Arduino" directory. Please let me know what I'm doing wrong here. Anything you can offer would be appreciated!

Here's the error message:

C:\Users\Jacob\AppData\Local\Temp\ccLySPGo.ltrans0.ltrans.o: In function setup':
C:\Users\Jacob\Documents\Arduino\sketch_oct7a/sketch_oct7a.ino:17: undefined reference toServoEasing::attach(int)'
C:\Users\Jacob\Documents\Arduino\sketch_oct7a/sketch_oct7a.ino:18: undefined reference to ServoEasing::attach(int)'
C:\Users\Jacob\Documents\Arduino\sketch_oct7a/sketch_oct7a.ino:19: undefined reference tosetSpeedForAllServos(unsigned int)'
C:\Users\Jacob\Documents\Arduino\sketch_oct7a/sketch_oct7a.ino:20: undefined reference to ServoEasing::setEasingType(unsigned char)'
C:\Users\Jacob\Documents\Arduino\sketch_oct7a/sketch_oct7a.ino:21: undefined reference toServoEasing::setEasingType(unsigned char)'
C:\Users\Jacob\Documents\Arduino\sketch_oct7a/sketch_oct7a.ino:22: undefined reference to synchronizeAllServosStartAndWaitForAllServosToStop()'
C:\Users\Jacob\AppData\Local\Temp\ccLySPGo.ltrans0.ltrans.o: In functionloop':
C:\Users\Jacob\Documents\Arduino\sketch_oct7a/sketch_oct7a.ino:34: undefined reference to ServoEasing::setEaseTo(int)'
C:\Users\Jacob\Documents\Arduino\sketch_oct7a/sketch_oct7a.ino:35: undefined reference toServoEasing::setEaseTo(int)'
C:\Users\Jacob\Documents\Arduino\sketch_oct7a/sketch_oct7a.ino:36: undefined reference to synchronizeAllServosStartAndWaitForAllServosToStop()'
C:\Users\Jacob\Documents\Arduino\sketch_oct7a/sketch_oct7a.ino:40: undefined reference toServoEasing::setEaseTo(int)'
C:\Users\Jacob\Documents\Arduino\sketch_oct7a/sketch_oct7a.ino:41: undefined reference to ServoEasing::setEaseTo(int)'
C:\Users\Jacob\Documents\Arduino\sketch_oct7a/sketch_oct7a.ino:42: undefined reference tosynchronizeAllServosStartAndWaitForAllServosToStop()'
C:\Users\Jacob\AppData\Local\Temp\ccLySPGo.ltrans0.ltrans.o: In function _GLOBAL__sub_I_servoTop':
C:\Users\Jacob\Documents\Arduino\sketch_oct7a/sketch_oct7a.ino:2: undefined reference toServoEasing::ServoEasing()'
C:\Users\Jacob\Documents\Arduino\sketch_oct7a/sketch_oct7a.ino:3: undefined reference to `ServoEasing::ServoEasing()'
collect2.exe: error: ld returned 1 exit status

exit status 1

Compilation error: exit status 1