Мини-фрезы из полимерной глины мега-коллекция (набор №13)

This is an on going collection, more models are being added periodically. So far there is a total of 25 designs.
All my polymer clay cutters: https://cults3d.com/en/design-collections/raflab/polymer-clay-cutters

✼ SPECIFICATIONS 📝
Our cutters are designed to work with polymer clay, although they can also be used for other soft materials. They feature a cutting edge of 0.4mm to ensure a sharp and clean cut, as well as saving time in post processing. The total height is 21mm and the lower surface is Ø21mm to have enough room to push down the cutter into the material.

✼ SIZES 📏
These cutters come in 1 size:
XS (10mm)

Note that these are the actual dimensions of the piece of clay that cutter will produce.

If you want to use them as cookie cutters, scale them up in your slicer to your desired size to get a bit thicker/more resistant walls.

✼ CARE 🤗
Handle with care. Do not store in hot environments, bake or wash in the dishwasher as the material could warp permanently when exposed to temperatures over 60ºC.

✼ TIPS 🤔
Use a glass sheet, tile or piece of flat acrylic to work the polymer clay without it getting stuck to the cutter. It is also recommended to use a light layer of corn starch or baby powder in the cutter for the purpose mention

0.4mm nozzle
0.4mm layer width (forced)
0.2 mm layer height (optional)
No supports needed