Пиксельный топпер из семян для Megatree 270

This 270 degree topper can be attached to a wall corner, a post etc, using one of the included wall brackets. One is a short reach bracket and the other is deeper, use whichever you feel more comfortable with. Be aware of the fixing screws interfering with each other on the inner holes ; I recommend using each of the upper outer holes and only one of the inner holes (preferable the lower one on the deeper support.
This topper allows seed pixels to be hung from it to form the topper for a Megatree.
This is ideal for having a Megatree on the corner of a wall, or on a 4" wooden post, etc.
It it 205mm diameter, 15mm deep and has slots for 48 strings.
Included is a clip for the bottom of the seed strand, allowing a bungee to be attached to give tension
It has been tested with Build-A-Lightshow seed pixels.
https://cults3d.com/@Kintara2

Look for my other designs for seed pixels

kintara2

Пиксельный топпер из семян для Megatree 360

• 2,3k виды
• 2 мне нравится
• 5 загрузка
• 0 коллекции
• 1 kомментарий
• 0 makes

Скачать 20,20 US$

kintara2

Пиксельный топпер из семян для Megatree 180

• 1k виды
• 0 мне нравится
• 2 загрузка
• 0 коллекции
• 0 kомментарий
• 0 makes

Скачать 20,20 US$

kintara2

Пиксельные адаптеры для семян для топперов

• 1,4k виды
• 2 мне нравится
• 5 загрузка
• 1 коллекция
• 1 kомментарий
• 0 makes

Скачать 2,02 US$

3D printing settings
Print with at least 4 walls, 6 top and bottom and at least 25% sparse infill in a grid or honeycomb pattern
I use Bambu Black ABS for my prints
Takes about 8:30hrs on a Bambu P1S.
The lettering is filled with yellow filament using Paint /Flood on the Bambu Studio Slicing App