Airsoft WE Hi-Capa Blank Slide Templates - версии 6.0 - 5.3 - 4.1

Collection of versions of Blank WE Hi-Capa Slides.

Fitting is the same process from my previous Residual Evil Eagle 6.0 Slide project. You can watch here for a fitting and trouble shooting guide: https://youtu.be/ozIKtmGvHf4

This colleaction has several versions of the following slide sizes:
- 6.0 slide ( including T-rex version )
- 5.1 slide
- 4.3 slide

I have included Guide rod Plugs and sight packs for the slides.

The slides themselves were originally based my 'STI Eagle Slide' which was originally based on:
WE Hi Capa 5.1 Slide Trial Version - https://www.thingiverse.com/thing:3818208
Created by - rosmaziha - https://www.thingiverse.com/rosmaziha/designs

I have printed and test slides in PLA under the following settings using a Bambu Labs P1S printer:

0.20mm Strength @BBLX1C
Sparse inflin Density ( 60% minium - 80% maximum )
Support , tree auto , deselect remove small over hangs.

I have included both .STL and .3MF files. I have used both file and they have printed with no issues. If you use the .3MF file I would recommed you 'mesh the boolean' before printing for best results.

As with any 3D printing there can be some tolerance diffrences between prints and printers, hopefully you will not come against any issues but my installation guide covers any potential fitting issues and adjustments you may need to make.