Перейти к содержанию
Реклама

USS EnterSurprise - Игровой контейнер для крошечных реактивных истребителей F14

uss_entersurprise_square_01.jpg USS EnterSurprise - Игровой контейнер для крошечных реактивных истребителей F14
uss_enterprise_bambu_desk_instagram_01.jpg USS EnterSurprise - Игровой контейнер для крошечных реактивных истребителей F14
uss_entersurprise_square_02.jpg USS EnterSurprise - Игровой контейнер для крошечных реактивных истребителей F14
uss_enterprise_printbed_square.jpg USS EnterSurprise - Игровой контейнер для крошечных реактивных истребителей F14
uss_entersurprise_square_03.jpg USS EnterSurprise - Игровой контейнер для крошечных реактивных истребителей F14
uss_enterprise_100_3x1.stl USS EnterSurprise - Игровой контейнер для крошечных реактивных истребителей F14
uss_enterprise_200_5x2.stl USS EnterSurprise - Игровой контейнер для крошечных реактивных истребителей F14
uss_nimitz_100_3x1.stl USS EnterSurprise - Игровой контейнер для крошечных реактивных истребителей F14
uss_george_washington_100_3x1.stl USS EnterSurprise - Игровой контейнер для крошечных реактивных истребителей F14
uss_hancock_100_3x1.stl USS EnterSurprise - Игровой контейнер для крошечных реактивных истребителей F14
uss_constellation_100_3x1.stl USS EnterSurprise - Игровой контейнер для крошечных реактивных истребителей F14
uss_kitty_hawk_100_3x1.stl USS EnterSurprise - Игровой контейнер для крошечных реактивных истребителей F14
uss_america_3x1.stl USS EnterSurprise - Игровой контейнер для крошечных реактивных истребителей F14
uss_john_f_kennedy_100_3x1.stl USS EnterSurprise - Игровой контейнер для крошечных реактивных истребителей F14
Реклама
Сделать предложение
Поделиться
Добавить к
Make
?
Качество творения: 4,7/5 (11 голоса)
Оценка участников по печатаемости, полезности, уровню детализации, т.д.
Лицензия
Формат 3D-проектирования
10 файлов (STL и ZIP) Закрыть
  • multicolor_uss_enterprise.zip
    • multicolor_uss_enterprise_black.stl
    • multicolor_uss_enterprise_grey.stl
    • multicolor_uss_enterprise_red.stl
    • multicolor_uss_enterprise_white.stl
  • uss_america_3x1.stl
  • uss_constellation_100_3x1.stl
  • uss_enterprise_100_3x1.stl
  • uss_enterprise_200_5x2.stl
  • uss_george_washington_100_3x1.stl
  • uss_hancock_100_3x1.stl
  • uss_john_f_kennedy_100_3x1.stl
  • uss_kitty_hawk_100_3x1.stl
  • uss_nimitz_100_3x1.stl

Узнайте больше о форматах
Последнее обновление
Дата публикации
Номер конструкции 907854
agepbiz

agepbiz

Сертифицированная учетная запись
Проблема с работой? Сообщить о проблеме.

18 kомментарии

Добавить комментарий

👉 Войдите, чтобы написать сообщение

18 комментариев

lmtjenny
lmtjenny

boat keeps falling in the exact same spot in the 90%'s so please be aware that it most likely will fall over
also any solutions?
thecoolpeople
thecoolpeople

anyone know which f-14 file you have to use?
mr_cg
mr_cg

Really nice model, especially the multi color variant. Unfortunately multicolor print takes extremely long time because ship needs to be printed upright. Would be great to optimize the multi color model so that it can be printed flat to reduce the amount of filament changes drastically. For this the rotary element would be needed to be optimized (e.g. snap and fit) and tower to be printed seperately. Printing the multi color parts flat will reduce the printing time from about 60h to 3-5h.
CaptainRex1806
CaptainRex1806

Hey I’ve printed the smaller 100 scale one and it worked perfectly and have now tried to print the larger 200 scale one and it has failed 3 times all in roughly the same area and have changed my print settings and it has alias no effect is there any suggestions

coinh
coinh

Hey, I saw the video about this and thought it would be great gift for my friend who is obsessed with aviation and an interest in all things nautical. I'm curious if this model only works on extrusion printers, I have a resin printer and after reviewing the model didn't think there would be much difference in the end result, but it seems the seam where it would hinge is completely fused, I also printed the Jets and the wings have a similar issue where they appear fused and will not pivot. Do you have any suggestions as to a remedy for this?

agepbiz
agepbiz

Hi, yeah, unfortunately these designs does not work well with resinprinters. this is because resinprinters does not handle clearance between movable parts very well and resin gets trapped in cavities

coinh
coinh

Yeah I've tried to modify it to allow it to drain out and with more clearance so I will try it and report back but yeah that's what I found unfortunately because it's a really cool concept and model.
zsa03a
zsa03a

Hello! I cant open the multy color zip, it says that the destination path is too long. Do someone know how to solwe this problem?
AntonD69
AntonD69

Could you maybe change the F14 to print in 2 steps? Fuselage and canopy. I would love the cockpit/canopy to be clear. And then glued into place on the plane.
It would be a nice enhancement for the people who paid for the aircraft carrier.

  • 1 мне нравится
blk5oh
blk5oh

Hi! May I request variant for USS Kitty Hawk (CV-63)? I'm printing as a gift for a veteran. Thanks in advance.

agepbiz
agepbiz

Sorry for late reply. I have just added USS Kitty Hawk (same model but with number 63 instead of 65 on the deck)
mark7769
mark7769

I'm using Cura 5.2.1 and I keep getting a (It's not watertight and may not print properly and consists go 2 sub meshes.Can you help me with this.

agepbiz
agepbiz

I dont use Cura usually but I tested the USS Entersurprise in 5.2.1 but got no such message. Same in PrusaSlicer, No errors detected
jyoung147
jyoung147

Hey there! Love this design, purchased it to print as a birthday gift for my Grandfather - any chance you could add a CV-64 variant as well? That would be really awesome. Would be willing to send a few bucks your way for the trouble!

agepbiz
agepbiz

I've added "USS Constellation", same model but with number 64 instead of 65 on the deck

  • 1 мне нравится
jyoung147
jyoung147

Awesome, thank you so much!!
Echo6423
Echo6423

Hello I'm new to 3D printing and the Jets wings keep being unable to move, I'm unsure how to fix it

agepbiz
agepbiz

Print these at slow speed, no more than 35mm/s, make sure you have good quality filament and optimal print temperature and good parts cooling. I recommend 0.15mm layer height. No support structures. If you use Cura or PrusaSlicer make sure you turn Arachne OFF. In PrusaSlicer: Print Settings - Layers and perimeters - Advanced - Perimeter generator - Set it to Classic

madniceys
madniceys

if we buy it can we sell it

agepbiz
agepbiz

No. This is for personal use only

  • 1 мне нравится
madniceys
madniceys

ok
LZ_3D_Designs
LZ_3D_Designs

That was a awesome design.. beautiful finish and looks real.. is a item to collect.. in my case I use a “raft” setup in Cura to print in the vertical position without any issues.
jimsaltzgiver
jimsaltzgiver

Love this print. I just made this for my daughters boyfriend who is in the Navy stationed at Pearl Harbor, and I know he will love it too.

I would love to see a version of this designed to hold Nintendo Switch games. Any chance of a variation like that coming out??

  • 3 мне нравится
hawk_ml
hawk_ml

I printed two jets and the carrier in the smaller size. Hatchbox grey at 30mm/s .1mm layer height with a brim (jets took about 1:10 each, carrier about 10:10). For some reason a tiny part of the left wing is coming off for me, but I think that's on my end. The carrier is perfect, I got the 3x1mm magnets for it. There's a tiny tab to help hold them in and I used superglue as well.

I had been looking for a Navy ship for my dad for Christmas and had trouble finding anything I liked. He'll love these!

  • 1 мне нравится
agepbiz
agepbiz

Thats great! Thank you for supporting me. When it comes to the printing issues of the Jets, what slicer do you use? If you use Cura or PrusaSlicer try turning the Arachne setting off. Arachne does not work well with tiny articulated prints

hawk_ml
hawk_ml

I'm using Cura 5.2.1, which specific setting do I need to enable/disable?

agepbiz
agepbiz

I dont use Cura, so I am a bit unsure. In PrusaSlicer this is called "Perimeter Generatior: Classic or Arachne". I think maybe in Cura this setting is related to "Thin Walls". What Arachne does is when the walls are thin it might combine two thin perimeters into one thick perimeters. This generates unwanted results on many tiny designs

hawk_ml
hawk_ml

The setting in Cura is "Print thin walls". I had time to print it again tonight and that seems to have fixed it. I'm reprinting the second one now, thanks!

It also appears to have fixed some Z banding issues on the left wing as well.

  • 1 мне нравится
hawk_ml
hawk_ml

Just to confirm the second jet printed just fine too. I'll have to keep that setting in mind for future tiny prints.

Turning on "Print thin walls" in Cura is what fixed it.

  • 3 мне нравится
agepbiz
agepbiz

That's good to know! Thank you for reporting back

  • 1 мне нравится
alfr3design
alfr3design

This reminds me to the micromachines, I love it man!

  • 1 мне нравится
agepbiz
agepbiz

Thank you!
Nekuian
Nekuian

The hinge is way too thin on the 100 version and it keeps breaking. Any chance this will get strengthened?

agepbiz
agepbiz

Hi. What do you mean by thin? If you have to use force to open it you might have to adjust your print settings. How does your first layer look? If it is fused together you will have to raise up the nozzle

fabpab
fabpab

I printed the 100 case well, and it opened fine. However when I printed the 100 version of the planes I couldn't open the wings.... And I broke one of the wings trying. Any idea? Ender 3 S1 pro. Pla silk

  • 1 мне нравится
agepbiz
agepbiz

What slicer are you using? If you are using Cura or PrusaSlicer make sure you have Arachne turned off. Arachne does not work well on tiny prints with articulation. Also I recommend slow speed on the planes 30-35mm/s. Silk filament is also not the best filament for tiny prints like this since silk filaments do expand and risk fusing parts with tight clearance

  • 1 мне нравится
fabpab
fabpab

Great info! thanks.. I'm very new to this (2 days!). Im using the slicer that came with my ender 3 s1 pro. I will need to check those settings as well, im not sure! Yeah i thought silk would not be as good as standard pla.. Thanks

UncleTech
UncleTech

I bought my ender 3 about 3 months ago, save yourself a headache and go download and use cura, the Ender 3 software is a old cura clone.

  • 1 мне нравится
Nekuian
Nekuian

Thanks for getting back to me. The first layer looks great, with no signs of fusion. The top and bottom pieces likewise do not show any signs and are clearly separated. However, just past the hinge there is the radius curve between the two main pieces where the thickness is very thin. The part keeps breaking in this location. On my most recent attempt I even tried using a small razor just to open the gaps up a bit on the hinge, but ran into the same issues. I see you mentioned turning off arachne in CURA but honestly do not see any option to do this. I'd appreciate any insight into how to do this, recommendations on infill density, or other feedback on what might be happening.

agepbiz
agepbiz

Nekuian can you send me some photos of the issue so I can take a better look at it?

Nekuian
Nekuian

Sorry I was unavailable over the weekend. Where would you like me yo send the images?

agepbiz
agepbiz

I have added an email address to my profile
fabpab
fabpab

I cannot download this, i have paid but when i click download i get a white screen. I have tried different devices, and networks. Any ideas?

agepbiz
agepbiz

Did you finally be able to download it? This sounds like an issue with the Cults page and not something I am able to control

fabpab
fabpab

Hey yeah it just started working after a couple of hours. Thanks!

georgehook
georgehook

i just paid for it and now i'm trying to slice it and it keeps saying invalid file any ideas how to fix it?

georgehook
georgehook

by the way the slicer i am using is cura 5.2.1

georgehook
georgehook

now it is 5,2.2

georgehook
georgehook

i read the comments and it has been 7-8 hours and is not working

agepbiz
agepbiz

Hi georgehook. I have tested the files in Cura but do not get the "invalid file" error you are getting. Is this before or after you have sliced the STL file? Make sure the downloaded file is not corrupted. Try download it again, perhaps use a different browser

Другие дизайны, которые могут вам понравиться

Все

Посмотреть похожие модели
Страница переведена при помощи машинного перевода. Ознакомиться с исходным текстом

Вы хотите поддержать Cults?

Вам нравятся Cults и вы хотите помочь нам продолжить наш путь самостоятельно? Обратите внимание, что мы — маленькая команда из 4 человек, поэтому поддержать нас в поддержании деятельности и создании будущих разработок очень просто. Вот 3 решения, доступные для всех:

  • РЕКЛАМА: Отключите блокировщик рекламы.
  • ДОНАТЫ: сделать пожертвование через Ko-Fi здесь Отправить донат
  • ПРИГЛАШЕНИЕ ДРУЗЕЙ: Приглашайте своих друзей, откройте для себя платформу и великолепные 3D-файлы, которыми делится сообщество!

Обмен и загрузка на Cults3D гарантирует, что дизайны остаются в руках сообщества создателей! А не в руках гигантов 3D-печати или программного обеспечения, которые владеют конкурирующими платформами и используют дизайны в своих собственных коммерческих интересах.

Cults3D - это независимый и самофинансируемый сайт, который не подчиняется ни одному инвестору или бренду. Почти все доходы сайта возвращаются создателям платформы. Контент, публикуемый на сайте, служит **только интересам его авторов, а не брендов 3D-принтеров, которые также хотят контролировать рынок 3D-моделирования.