Кряки из Кведлинбурга Вставка

Do you love Quacks but hate all of the baggies and token sorting? Do you also love the artwork included with the game? Then you are in the right place!

This insert for The Quacks of Quedlinburg is designed to fit all of the pieces of the base game only while keeping the included cardboard insert. Included is the startup tray (brown) for all or the pieces included in game setup, a crystal ball card holder (gray), rubies chest (brown), white potion (white), 1-potion (red), 2-potion (green), and 4-potion (blue). Pictures and video are of the prototype and may not reflect the actual colors of the product.

Parts:
1 Bottom
1 Top
2 Bottom
2 Top
4 Bottom
4 Top
Crystal
Rubies Bottom
Rubies Top
Startup
White Bottom
White Top

Tips for printing:
From my experience the things that will need to be checked are support and build plate adhesion.
Support: To minimize waisted material for the insert base I will print the Startup Only with a 7% infill and a 5mm (up to 10mm) x/y spacing and this works great as long as you have the support interface enabled. The x/y spacing will help make it easier to remove the support. The Crystal & all Bottom parts can be printed without support. I print the Tops with a 15% infill and 2mm x/y spacing. The x/y spacing will help with removal of the support. And make sure support interface is enabled.
Build Plate: Everything else prints great with a skirt or brim. If you are having issues printing the Tops or Startup try using a raft instead.
Assembly:
All hinges are designed to fit 3mm filament.

If you have any questions please do not hesitate to reach out to zv3dcreations@gmail.com