Signorie - органайзер для настольных игр / вкладыш

Signorie – Board Game Organizer / Insert (3D Print STL)

This 3D printable insert is designed for the Classic board game Signorie. It provides a complete storage system for all components, keeping everything separated, protected, and fast to set up. The trays fit neatly inside the original box and are arranged using an interlocking mechanism that prevents them from moving around during storage or transport.

Design Philosophy
This organizer focuses on function and efficiency. No decorative elements, no wasted material—just clean compartments that hold everything in place while minimizing print time and filament use. Simple, practical, and engineered to enhance the Signorie experience.

Features
- Fully interlocking tray layout that prevents shifting inside the box
- Player-specific trays to keep each set of components separated
- Dedicated area for common game pieces
- Optional spacers to support and level the game boards at the bottom of the box
- Choice of normal or long game piece boxes, depending on your storage style
- Support-free geometry designed for FDM printers

Customization Options
You may personalize the insert based on your preferences:

• Print 2 or 4 spacers depending on how tightly you want the bottom boards supported
• Print 2 standard Game Pieces boxes, 2 Long Game Pieces boxes, or mix one of each (Choose whichever best fits your preferred stacking arrangement)

Everything is sized so all combinations interlock perfectly.

Recommended Print Settings (0.4 mm Nozzle)
Layer Height: 0.24 mm (Draft Quality)
Infill: 15% (Grid or Gyroid recommended)
Walls/Perimeters: 2–3
Supports: Not required
Material: PLA recommended
Bed Adhesion: None, or brim if needed
Print Orientation: Flat on the base

Included Files
Signorie Full Insert
Player Pieces Left x1
Player Pieces Right x1
Player Pieces x2 (standard)
Player Pieces Lid x4
Game Pieces x2
Game Pieces Lid x2
Game Pieces Long x1
Game Pieces Long Lid x1
Spacer x4
Tiles x1

Required Quantities
- 4× Player Pieces trays (1x Left,1x Right, plus 2 standard)
- 2× Game Pieces boxes (Standard or Long, any combination)
- 2–4× Spacers, depending on how snugly you want the boards supported
- 1x Tiles (holds all the tiles)

Notes
This insert dramatically improves setup and cleanup, prevents components from mixing, and keeps the box contents stable even when stored vertically. The interlocking tray design ensures a secure fit regardless of which combination of Game Pieces boxes you choose to print.

Digital Files Disclaimer
This purchase provides digital 3D model files (STL) only. No physical items, printed inserts, or game components will be shipped. You are responsible for printing the files on your own 3D printer or through a printing service.

Designer Statement
This is an independent, fan-made project created out of appreciation for Signorie. It is not affiliated with, endorsed by, or sponsored by the original publisher or rights holders. All trademarks and game elements belong to their respective owners.

Recommended Print Settings (0.4 mm Nozzle)
Layer Height: 0.24 mm (Draft Quality)
Infill: 15% (Grid or Gyroid recommended)
Walls/Perimeters: 2–3
Supports: Not required
Material: PLA recommended
Bed Adhesion: None, or brim if needed
Print Orientation: Flat on the base

Included Files
Signorie Full Insert
Player Pieces Left x1
Player Pieces Right x1
Player Pieces x2 (standard)
Player Pieces Lid x4
Game Pieces x2
Game Pieces Lid x2
Game Pieces Long x1
Game Pieces Long Lid x1
Spacer x4
Tiles x1

Required Quantities
- 4× Player Pieces trays (1x Left,1x Right, plus 2 standard)
- 2× Game Pieces boxes (Standard or Long, any combination)
- 2–4× Spacers, depending on how snugly you want the boards supported
- 1x Tiles (holds all the tiles)