Кран с конической стрелой

This knuckle boom crane is used in many offshore areas. As a so-called border platform crane, this crane can be used on deck edges to lower equipment from the ship into the water or to load it at other points outside the ship.

The crane is used on auxiliary vessels, offshore, fishing and minesweepers.

We cannot name the original manufacturer of the crane.

The model

Assembly instructions are included in English and German. The model can be used as an FDM and as a RESIN print. A combined use of RESIN and FDM increases the stability and the optics. The components are designed so that the crane can be placed in any position. The pictures show the standard resting position.

Our advantages

This model is not designed for any specific scale. However, please note that the quality of detail varies with increasing scale. The smaller your model, the more details will be lost and the more difficult it will be to print.

As many copies as you like - print as many cranes as you need. The following still applies: Buy the product once and print the model as often as you need it.

You always have spare parts to hand and don't have to go to the trouble of searching for defective parts even after years of use.

The limits of printing are determined by your 3D printer. The installation space of your printer determines the maximum possible scale.

Do you have any further questions? Do not hesitate to contact us.