HOME DEFENCE 24 - ГИЛЬЗА HDR 50 - СТАЛЬНОЙ СТВОЛ И 100-МИЛЛИМЕТРОВЫЙ УДЛИНИТЕЛЬ 12.70

HDR 50 SLEEVE - HOME DEFENCE 24 STEEL BARREL AND 100MM EXTENSION 12.70 BORE

A HOLSTER FOR HDR50 STEEL SLEAVE WAS DESIGN PLEASE HAVE A LOOK!
https://cults3d.com/en/3d-model/game/holster-for-left-or-right-hand-hdr50-steel-barrel-sleeve-for-belt-or-wal

FOR MORE DESIGNS FROM OUR COLECTION: https://cults3d.com/en/design-collections/COSTATECHNICDESIGN/airsoft-paintball

FREE UPGRADE - 24 JUNE 2024 - CO2 HDR50/HDR68 MARKER CO2 PIERCING UNIT - RELEASE KEY

IF YOU ARE LOOKING FOR THE FULL PACKAGE OF THE CO2 SAFETY TUBE HOLDER - PLEASE HAVE A LOOK:

https://cults3d.com/en/3d-model/game/co2-safety-storage-tube-with-co2-hdr50-marker-piercing-release-key

WARNING!

I STRONGLY RECOMMEND NOT USING THE RELEASING KEY WHEN TIGHTENING UP THE CO2 PIERCING NUT!

USE ONLY YOUR FINGERTIPS, AND EVEN THEN, DO NOT FORCE IT! THE AIR SEAL IS MADE BY AN ORING. THIS PROCEDURE DO NOT REQUIRE A LOT OF FORCE!

THE KEY SHOULD BE USED ONLY TO OPEN THE CO2 CHAMBER!

EXCESSIVE FORCE WILL WEAKEN THE THREADS AND THE STRUCTURE OF THE CO2 CHAMBER!

FREE UPGRADE - 23 JUNE 2024 - AN EXTRA DRUM/MAGAZINE HOLDER ALLOWS STORAGE AND EASY RELEASE OF YOUR DRUM/MAG WHEN NEEDED WHILE ALSO SECURELY PREVENTING ACCIDENTAL REMOVAL OF THE DRUM FROM ITS POSITION. THIS IS ACCOMPLISHED THANKS TO THE ORIGINAL SPRING LOCKING SYSTEM.

IF YOU ARE LOOKING FOR VERSIONS OF THE DRUM/MAG HOLDER WITH A LARGER CAPACYTY - UP TO 3 UNITS - PLEASE HAVE A LOOK:

https://cults3d.com/en/3d-model/game/hdr50-drum-mag-holder-picatinny-rail-original-design-spring-locking-system

The system connects to the bottom rail and is secured with M4 30MM Allen head bolts and lock nuts (a lock nut is strongly recommended).

BEFORE MOUNTING, ENSURE THAT THE BARREL IS INSTALLED CORRECTLY AND THE MARKER HOUSING IS NOT RESTRICTING THE BARREL MOVEMENT! THE SLEEVE FITS GREAT THE HDR50 MARKER!

AND TO BE SURE WE ARE TALKING ABOUT THE SAME PART... PLEASE HAVE A LOOK!

https://www.terranpaintball.ro/cumpara/hdr50-steel-tuning-barrel-w-thread-spring-thread-protector-801

I DO NOT ENDORSE ANY E-STORE NOR ANY PAINTBALL UPGRADE PARTS MANUFACTURER! ALL PARTS ARE PURCHASED WITH MY OWN MONEY!

WITH THE EXPERIENCE ACCUMULATED FROM OUR HDR.50 SUPPRESSOR DESIGN, AND AS A CORNERSTONE FOR THIS BUILDING PLATFORM, WE DEVELOPED THE HDR 50 SLEEVE FOR "HOME DEFENCE 24" STEEL BARREL, A DESIGN BUILT AROUND THE VERSATILE PAINT MARKER HDR.50 FROM UMAREX.

PLEASE HAVE A LOOK AT THE SMALL BROTHER OF HDR50 SLEEVE FOR HOME DEFENCE 24 STEEL BARREL AND 100MM EXTENSION... T4E HDR50 SUPPRESSOR!
https://cults3d.com/en/3d-model/game/umarex-50-suppressor-paintball-marker

THE DESIGN IS A HEAVY-DUTY BUILD CONCEPT ... ENSURING THAT THE UNIT WILL SUSTAIN THE SHOCKS AND HITS ON THE PAINTBALL BATTLEFIELDS!

THE UNIT FEATURES A "PUZZLE LIKE DESIGN", THEREFORE ANY DAMAGED SECTION CAN BE EASILY REPLACE... RATHER THAN THE ENTIRE UNIT!

PARTS ARE ASSEMBLED USING:

3 PCS M4 X 30MM SOCKET HEAD AND LOCK NUT
2 PCS M4 X 25MM SOCKET HEAD AND LOCK NUT
1 PC M4 X 20MM SOCKET HEAD AND LOCK NUT

FOR GRIP
2 PCS M4 X 30MM SOCKET HEAD AND LOCK NUT

PACKAGE INCLUDE ALSO A SET OF BARRELS AND A SET OF SILENCERS... WITH A BORE OF 12.80, 13.00 AND 13.5MM... PARTS SUCCESSFULLY TESTED.

FOR GREAT RESULT AND A CONTROL OVER THE DIMENSIONS OF PELLETS/SLUGS... I STRONGLY RECOMMEND OUR DESIGN FOR UMAREX .50 ... HAVE A LOOK!
https://cults3d.com/en/3d-model/game/umarex-hdr-50-pellets-with-steel-bb-6mm-core

The suppressor delays the release of compressed air, reducing the sound volume by extending the evacuation time.

A plug was designed to protect the barrel during transportation. I strongly recommend printing it with a contrasting color so you will know that the barrel is plugged! The plug has burst holes as a backup protection.

This KIT is for personal use only! Please read our policy! If you do not agree, please do not buy this product! Failure to comply with our policy will result in the immediate termination of your user license! Do not alter or modify for resale, sharing with others, making it public, or redistributing in any form, digital or physical, including digital content such as images, DXF, STL files, etc. Do not sell, share, make it public, or redistribute it in its current form. Do not sell the final product! You will need a Commercial License to sell this final product! For a commercial license, please contact us!

Thank you for your interest in our product!

THE ONE PRINTING THE HDR 50 SLEEVE FOR HOME DEFENCE STEEL BARREL IS ENTIRELY RESPONSIBLE FOR ANY INCIDENT OR ACCIDENT RESULTING FROM USING THIS DESIGN.

WE DO NOT ASSUME ANY RESPONSIBILITY!

USE YOUR JUDGMENT!

Stay safe, be safe and be happy!

DESIGN TO PRINT WITHOUT SUPPORT! BY COSTA!

ОБЪЕМ ПЕЧАТИ 220X220X220!

ДЕТАЛИ УСПЕШНО НАПЕЧАТАНЫ НА ПРИНТЕРЕ BAMBU X1C С БАЗОВЫМИ НАСТРОЙКАМИ. 3 ЛИНИИ СТЕНКИ И 25 % ЗАПОЛНЕНИЯ.

ДЕТАЛИ РЕКОМЕНДУЕТСЯ ПЕЧАТАТЬ С 3 ЛИНИЯМИ/СТЕНКОЙ И 100% ЗАПОЛНЕНИЕМ.

УВЕЛИЧИВАЙТЕ ИЛИ УМЕНЬШАЙТЕ ПРОЧНОСТЬ ПО СВОЕМУ УСМОТРЕНИЮ.

РАЗРАБОТАН ДЛЯ ПЕЧАТИ БЕЗ ПОДДЕРЖКИ!

ТОЛЬКО ДВА КОМПОНЕНТА НУЖДАЮТСЯ В ПОДДЕРЖКЕ (МОСТ И УДЛИНИТЕЛЬ), И ТОЛЬКО ДЛЯ НЕБОЛЬШОЙ ЧАСТИ ОСНОВАНИЯ!

НЕБОЛЬШАЯ СБОРКА В RAFT ДАЕТ ВОЗМОЖНОСТЬ ВЫБРАТЬ "ПОДДЕРЖКА ТОЛЬКО НА ПЕЧАТНОЙ ФОРМЕ"!

ЭТИ ДЕТАЛИ БЫЛИ НАПЕЧАТАНЫ БЕЗ ПОДДЕРЖКИ ТАКЖЕ С ПРИЕМЛЕМЫМИ РЕЗУЛЬТАТАМИ, ИСПОЛЬЗУЯ BAMBU LAB X1C.

ОЧИСТИТЕ ВСЕ ДЕФЕКТЫ ПЕЧАТИ И МАТЕРИАЛ ПОДДЕРЖКИ - ЕСЛИ ОН ИСПОЛЬЗОВАЛСЯ - ВСЕ ДЕТАЛИ ЗАПОЛНЯЮТСЯ ХОРОШО И АККУРАТНО... ЕСЛИ ДВЕ ДЕТАЛИ, КОТОРЫЕ ДОЛЖНЫ СОЕДИНЯТЬСЯ, НЕ ПОДХОДЯТ ДРУГ К ДРУГУ... УБЕДИТЕСЬ, ЧТО НА НАПРАВЛЯЮЩИХ НЕТ ЗАМИНОВ!

НЕ ЗАСТАВЛЯЙТЕ! ОНИ БУДУТ ЗАМИНАТЬСЯ! ОЧИСТИТЕ КОНТАКТНУЮ ПОВЕРХНОСТЬ... И ПОВТОРИТЕ ПОПЫТКУ!