16,5 мм калибр 84 мм диаметр малый поворотный стол плоский плюс основание

16.5mm gauge 84mm diameter small turntable flat plus base

Taking the wagon turntable a stage further to create what looks like a typical turntable with pit. The pit is flat, the whole unit is same thickness as standard track, so needs no hole cut in baseboard. Could be used on its own, but it fits in new 180 degrees turntable bases which raise it by 3.5mm, and can then be operated remotely.
This version is flat topped 84mm diameter 16.5mm gauge . Fit code 100 rail.
version with just deck included
mechanism included for remote operation
wiring would still need to be determined

One of many designs created over a 10 year period to be printed on Shapeways, mainly for SLS but smaller models also printed in fine material. All designs passed initial checks for shapeways.
It may be possible to print using other types of printing. 3D printers are advancing very rapidly and getting cheaper so I would expect it will not be long before home type printers which can print all my designs are available. Alternatively there are many commercial 3D printing companies who should be able to do the printing.

Designs have been modified for home printing.

I have had some of these track designs test printed using PLA on Bambu printers at a local print shop and results were very good.

Groove for rail will need some cleaning out .For designs for code 100 rail, I initially try using smaller rail profile such as code 75.

Care is needed, as rail could slip .