Подставка для телефона "Северный олень

• Toy
• Decoration
• Phone stand
• Keyring

A design is with 'open price' starting with 0.0€
You can pay me as much as you want - it will help me in making more models
If you don't want to pay it's fine - you can still have the models for free :)

If you want to sell prints of this models you can buy a commercial license here:
https://cults3d.com/en/3d-model/gadget/reindeer-commercial-license

Check out more models from Phone collection
https://cults3d.com/en/design-collections/c47/phone

and Xmas collection
https://cults3d.com/en/design-collections/c47/xmas

A lot of versions to print

• Solid - easiest to print
• Parts - to be printed in separate parts in different colors
• Multi - combined with SOLID for multicolor printers

There are full body models and with a space for a phone (8-16mm thickness - as in file names and on the bottom of models)
Phone will be at 12° angle. Should work with horizontal and vertical placing (tested with 12mm phone with 12 and 14mm reindeer versions)

To resize the models use the equasion:
'Needed space (in milimeters)' divided by 'model number' multiplied by 100% = 'Needed model size in percent'
For example if you need more stable 16mm you can take 10mm version resized to: 16 / 10 * 100% = 160%

I think that the Reindeer shouldn't be used by smaller kids (0-3yo)
Antlers may break. It will be too small to choke but still...

KEYRING
To make a keyring use a model of your choice and add a Reindeer_KEYRING-addon
Both models should be in the exact same position in your slicer to be sure that they will merge properly
Then select both models and merge them (right click menu)
Keyring models are with a 'frame', a flat surface that will not be printed. This way it is easy to set it in the right spot - Ignore model 'errors' and DO NOT try to 'fix' the model
After merging you can easly resize or rotate the model if needed

Model printed in parts has separate back hooves model with a keyring - no need to use an addon

On multicolor prints a KEYRING-addon should be highier on the list than xMULTI_dark-brown and lower than SOLID
Use the same color as hooves (dark-brown)

EYES
The same as a keyring
Reindeer_PARTS_eyes-addon can be used with Reindeer_PARTS
This model adds eyes like in SOLID model, instead of holes for filament

MULTI
Use SOLID model of your choice and add xMULTI models to the same place. Then merge all 3 files together
The easiest way is to just select all 3 files and move them to the slicer and click YES when asked if it's a single model with multi parts - they will be merged automaticly

SOLID should be first on the objects list, then optional KEYRING-addon and then the xMULTI models

Default color for body is brown but chose what you want
'dark-brown' is with antlers, front and back hooves and eyes
'red' is with a nose only

Models are with an 'outline', flat model that will not be printed

PARTS
After assembling parts should stay in place
You will hear a 'click' sound when it's pushed all the way

For eyes you need few mm of filament (preferably a black one)
If you don't want to do this (may be difficult) you can leave holes like it is (as on few models on photos) or print it with Reindeer_PARTS_eyes-addon to fill the holes (merge addon with the body)

Pliers may be usefull for assembling, especially with eyes and antlers

Hooves are symetrical so it doesn't matter what will go to the left and what to right
Back hooves are bigger than front ones

I printed antlers and all hooves together in one print

UPDATE 28 XII 2023
Changed file names from 3COL to MULTI to avoid mistakes (multi color printing vs printing in parts)

UPDATE 06 I 2024
Added versions for 6-9mm phones

UPDATE 05 IV 2024
Updated PHONE models
Now they are with numbers on the bottom to show what size it is after printing it
Changed Keyring addon a little - should work better
Added 'mm' to numbers in file names to avoid rare confusions

UPDATE 02 XII 2024
Removed MULTI_body files - as it is not needed and just add much more files (and more work for me when I change something). Use SOLID + xMULTI_dark-brown + xMULTI_red for multicolor print
Changed name MULTI to xMULTI to make setting up models easier. Select 3 files (SOLID + xMULTI) and move it to slicer. Then click YES if asked if it's a single models in parts - it will be loaded merged to one object
Improved xMULTI models. Colors will be better anchored to the base model

UPDATE 30 XI 2025
Changed phone angle from 16° to 12° for better stability
Removed 6-7mm phones

Нет необходимости в опорах

Используйте немного наполнителя, я печатал с 10% гироида

Высота слоя 0,2 мм или меньше (0,1 мм на фотографиях)

2 стенки или более (для брелоков хорошо подходят 3 стенки)