Stool-Shaped Plant Pot – Modular Planter (3D Printable STL Files)

A unique 3D printable plant pot with a stool-shaped base, designed as a decorative and functional addition to your interior.

The unusual stool-inspired design makes the planter stand out and look great in living rooms, bedrooms, offices, and other indoor spaces.

⚠️ IMPORTANT:
This listing includes DIGITAL STL FILES ONLY.

🌱 Features
Unique stool-shaped planter design
Modular construction – the pot is printed in several separate parts
Parts are assembled using a 3D printed screw
Dedicated screw test model included
The outer wall looks especially good with the Fuzzy Skin setting
Separate space inside the pot for planting your plant
Bottom section provides space for excess water
Helps prevent water from remaining directly around the plant roots
Original design optimized for FDM 3D printing
🔩 Assembly & Screw

The planter is assembled from several printed parts using a 3D printed screw.

If the screw is too tight or difficult to thread into place, you can slightly scale the screw in the X/Y axes to adjust the fit.

For the best results, it is recommended to first print and use the dedicated screw test model included with the files. This allows you to check the fit before printing the complete planter.

🖨️ Printing Recommendations

The model was designed with FDM 3D printing in mind.

For the exterior wall, I recommend using the Fuzzy Skin setting. This creates a textured surface and gives the finished planter a much more attractive appearance, similar to the examples shown in the preview images.

You can also experiment with different filament colors and finishes to create your own unique planter.

💧 Plant & Water Drainage

The main interior space is designed for planting a small plant.

A separate space underneath the planting area provides room for excess water, helping prevent the plant from sitting directly in collected water.

This makes the planter more practical for everyday indoor use.

📦 WHAT YOU GET

Digital STL files for the complete modular planter, including:

Plant pot components
Stool-shaped base components
3D printable assembly screw
Dedicated screw fit test model

Digital STL files only – no physical product will be shipped.

FDM print, layer 0.16-0.20, Nozzle 0.4
I use PLA, but use the appropriate material depending on where you will keep the plant.