3D-ПЕЧАТНАЯ ЛАМПА KUMIKO

This is without a doubt my favorite lamp. I've printed two for my kids as gifts and they've turned out perfect. The lamp is sturdy with parts that are thick and fit snug. Glue and sanding are optional but not necessary. I also did not have to use supports when printing. The electrical components are around $20 total this includes the light and light socket. See photos.

The shade base and lamp base are threaded once again to make a solid connection. They're also the same diameter as previous lamps so if you want to mix and match basses and shades then that's possible.

I used the Jade white filament by bambu labs, but I may end up using a beige filament in combination with the white on the shades for my next print.

Lamp Specs

Thickness = 2mm or 0.12"

Height = 376mm or 14.8"

Bottom = 134.5mm wide or 5.29" wide

I used the Bambu Lab P1P for this print. Jade white Filament from Bambu Lab. No supports needed. See photos for print.

Total print time on Bambu Lab P1P

Base - 4h25m

Shade Base - 1h34m

Shade Top - 40m

6 Shades - print 2 at a time 5h38m. 17h24m for 6 total

Total print time - 24h3m