Ice Cream Drip Flat Cone Soap Dispenser Holder

Ice Cream Drip Soap Dispenser Holder digital STL File - NOT A PHYSICAL PRODUCT

This listing is for the flat cone design.

Doesn't it look so tasty? Perfect for summer or just as an all year round design! The sample shows 5 colours but the sprinkles can be done in one colour so the design is suitable for 1 AMS users as well.

Multiple soap options included:
Bath & Body Works (259ml)
Baylis & Harding (500ml)
Carex (250ml)

Prints in two parts - top plate and main body.

Main body can be printed in one colour or with a coloured face (the side facing the plate). For the coloured face you will need an AMS. Please note for this design the coloured face is reversed (see photos) due to a non symmetrical design.

Both parts are press fitted together after printing, no supports or glue required unless the top plate is loose (can occur on very well calibrated printers). If the top plate is too tight to fit, we have included a version with higher clearances for the top plate that you can print.

Personal & Commercial Use allowed:
You can 3D print and sell the physical items made with this digital file but never the file itself.
You cannot make changes to the file and claim it as your own.

DIGITAL DOWNLOAD ONLY – No physical item will be shipped.
This file is for multicolour printers only.

The 3MF file already contains a pre-coloured model. If you wish to change the colours used, you may do so by altering the filament colour itself and mapping to the correct filament in your multi-material/AMS system.

While we do provide a STL file, you will need to split to parts and colour them yourself in the slicer as STL files do not contain colour information.

Please note:

Digital files cannot be returned nor refunded. If you have a question regarding the file please message us first before making your purchase.

We are unable to provide technical support for printers as they vary by model and make.

You may use the digital file to create physical products but you may not sell or give away the actual digital file itself.

Follow us on our social media accounts @animaidesigns for new product listings!
Get the latest update on our digital files from our Patreon @animaidesigns

Please contact us if you have further questions.

Happy Printing!

Recommended Print Settings:
Layer Height: 0.2mm
Nozzle: 0.4mm
Wall Generator: Arachne
Infill: 7-15% Gyroid or Cross Hatch
Supports: Not required
Speed: 20-50mm/s for layer 1 and top surface, then 150-200 for the rest.