Футляр для сигарет с резьбовой крышкой - завинчивающийся, прочный, высота 90 мм

Functional, screw-top cigarette box (twist closure) for approximately 12 cigarettes (standard king-size/OCB 73mm).

The model consists of a box and lid with a matching trapezoidal thread (printed in-house, without metal threads). Thanks to the scaling in the slicer (box ~105%, lid ~108–110%), the thread fits reliably and securely.

Features:

Grooved exterior for improved grip
Two small side "cigarette tubes" as a design element (for aesthetics or for small items)
Printable without supports (with correct orientation)
Robust for everyday use, but not waterproof or food-safe

Inspiration: Classic cigarette cases from the 1950s/60s, modernized for 3D printing.

Keywords: cigarette box, cigarette tin, threaded box, twist closure, cigarette case, tobacco tin, zigbox, screw-top tin, 3D printed tin

Material: PLA (preferably matte or slightly textured, e.g., Flashforge Generic PLA)
Nozzle: 0.4 mm
Layer height: 0.20 mm (standard) or 0.16 mm for better thread finish
Wall sanding: 4–6 (depending on desired thickness, 4 is usually sufficient)
Infill: 10–20% Gyroid or Cubic (for stability)
Infill-wall overlap: 25–30%
Temperature: 200–210 °C (PLA)
Bed: 60 °C
Supports: None needed (print can and lid with the opening facing upwards)
Print orientation: Upright (can on the bottom, lid on the threaded side)

Slicer scaling (important for fit):

Can (bottom): 105–107% (test!)
Lid: 108–112% (usually 2–4% more than the can)
Test print with Short thread section recommended

Notes:

Thread is 3D printed → Fit depends on filament, nozzle, temperature, and scaling. Always test first prints.

Not suitable for food or tobacco (PLA is not food-safe).

For a smoother feel: After printing, lightly sand the threads with fine sandpaper (400–600 grit) or rub with petroleum jelly.

This model is designed for standard king-size cigarettes (approx. 7.8–8 mm diameter).