Зимний город чудес

Wintery scene on a mountain with a train, buildings and trees plus lots of other stuff. Idea for this started from my friend Stuwaha, she provided me with a sketch (plus a lot of invaluable feedback during the creation process) and I build from that. It has lots of traditional elements for such scenes but I also wanted to steer a bit away from most Christmas themes (the star is a compromise) making this more just a winter scene than a Christmas town, fitting for everyone!

I printed mine from Taulman T-Glase that had a nice transparent effect, and finished by simply spraying very little matte white paint for a slight snow effect. Inside I simply fitted some "fairy lights" that are sold just about everywhere cheaply, there's one building that requires some trickery to wire, but all buildings have a channel for wires underneath.

No supports required.

In default size the model is: 130x168x145mm

There are lots of smaller detail so this model can't be scaled down much, depending on your printer of course. I printed mine scaled down slightly to finish in 15 hours, 0.2mm layer height, 10% infill at 50mm/s on my Flashforge Creator Pro.

Thing to note though like always with steps is to use enough top layers or higher infill, I used 5 top layers as I didn't want to up the infill. Also the lamp posts might be challenging to print, I had no problems but some of them snapped for friend of mine. If this becomes a problem I can release version without lamp posts.

EDIT: Added a file with a bit thicker lamp posts, and separate files for them if you had them break off and want to replace them with glue.

EDIT2: Added (untested) files for multimaterial printing and made the lamp posts even thicker in the original.