Counter-Strike Керамбит на кристаллической основе Модель

A 3D model featuring a detailed, coppery-red Karambit knife, inspired by Counter-Strike, emerging from a cluster of white geometric crystals, mounted on a dark circular base.

Manufacturing Settings and Technical Details (Summarized):

Type of Machine: FDM 3D Printer (suitable for the model's form and to achieve distinct colors for the knife and crystal). Resin (SLA/DLP) would provide superior detail on the Karambit's intricate handle and the crystal facets, resulting in a smoother, more refined finish, but at a higher cost and increased post-processing.

Materials Recommended:

Karambit: Copper/Bronze colored PLA or Silk PLA (to replicate the rendered metallic sheen). Alternatively, a base PLA (e.g., grey) can be used for painting with metallic copper/bronze.

Crystal: White PLA (for a solid, clean crystal look) or translucent/clear PLA (if aiming for a more ethereal effect with light).

Base: Dark PLA (black or grey) for contrast.

Resolution (Layer Height):

FDM: 0.12mm - 0.16mm (to best capture the Karambit's handle details, blade curve, and crystal facets).

Resin: 0.05mm or finer (for superior surface quality and crispness of edges).

Suggested Size: 150mm - 250mm tall (from base to the top of the ring handle), making it a substantial display piece.

Infill: 15-25% (sufficient for a decorative, non-functional item, providing good stability for the upright knife). Cubic or Gyroid patterns are robust choices.

Supports Needed: Yes. Supports will be crucial for the underside of the Karambit's curved blade, the finger ring, the inner parts of the handle, and potentially for overhangs within the crystal cluster. Given the complex curves, Tree/Organic supports are highly recommended for easier removal and cleaner results on visible surfaces.

Finishing Suggestions: Carefully remove all supports. Light sanding can smooth any support marks, especially on the knife's handle and blade. For an authentic metallic look, priming and then painting with metallic copper/bronze spray paint or acrylics is recommended for the Karambit. For the crystal, ensure a clean white finish for opaque prints, or perform sanding/polishing if using clear/translucent materials for a transparent effect. A clear coat can protect the paint and enhance the finish.

Safety Standards Applicable:

Intended Use: This model is designed for decorative purposes only, suitable as a collectible, display piece, or fan art. It is NOT a functional weapon.

Safety Alerts:

Non-Critical Part: This is a decorative item and not intended for any functional or load-bearing applications.

Not Food Contact Safe: 3D printed objects are generally not considered food safe due to their porous nature.

Child Hazards: This model depicts a knife and has pointed elements. While a 3D print and not sharp, it should be treated with caution. It could pose an injury risk if handled improperly or if parts break off. Keep out of reach of children, and educate about its non-functional, display-only nature. Do not sharpen or modify to be sharp.