Антонио Гауди РаботыВикипедия

The Casa Vicens Rehabilitation STL, designed in 3D by KLAN 3D, is a meticulously crafted digital model capturing Antoni Gaudí’s architectural marvel in stunning detail. This 4-inch model showcases Gaudí’s Neo-Mudéjar and Art Nouveau influences, featuring the ornamental ceramic tiles, latticework, and distinct brick patterns synonymous with Casa Vicens. Every feature is thoughtfully designed for precision in resin printing, balancing intricate textures and structural integrity.

Printer Type: Resin (SLA/DLP)

• Layer Height: 0.025 - 0.05 mm (for fine details, opt for 0.025 mm)
• Exposure Time: 8-12 seconds (depending on resin and printer)
• Bottom Layer Count: 4-6 layers for strong adhesion to the build plate
• Bottom Exposure Time: 30-35 seconds

Print Orientation:

• Tilt Model: Orient at a 30-45° angle to reduce support marks on detailed areas and avoid large flat surfaces parallel to the build plate.
• Supports: Medium to heavy supports, with finer supports on intricate sections to protect delicate details.
• Support Placement: Focus supports on the bottom and backside to minimize visible marks on the facade details.

Additional Settings:

• Infill Density: Solid or 100% infill recommended for durability in smaller prints.
• Lift Distance: 5-6 mm
• Lift Speed: 60 mm/min

Post-Processing Tips

1.  Wash: Rinse the model thoroughly with isopropyl alcohol to remove any uncured resin.
2.  Curing: UV cure the model for 2-5 minutes on each side, focusing on fine details without over-curing.
3.  Finishing Touches: Lightly sand or use a small file to remove any visible support marks, preserving the intricate detail work of Gaudí’s design.