Carteira "inteligente" impressa em 3D (actualizada para parafusos M3)

is the assembly complicated?

Can you make a version that will fit cards that have thrugh punch numbers? and the backplate standoff is kinda week so if you could give it a chamfer so its more rigid that wuld be nice.

I made it, used 3 x M2.5 6mm screws to fix it and 1 8mm for the corner of the top.

I used PLA with 40% infill. Took around 5 hours to print as I placed all the parts in one STL.

https://photos.app.goo.gl/5TysMPYrtcETrcqq8

This was printed with Extrudr PLA NX2 Orange

I dont know if I am going to use it, it feels quite rough on the pocket compared to a classic leather wallet....lets see..

made it, i don't have the m8 bolts, but superglue fixes that, the money clip is slightly too big to fit without clipping a bit on the corner, love it though!

You can easily find the screws on amazon or Aliexpress.
Example:
https://www.aliexpress.com/item/33022099174.html?spm=a2g0o.productlist.0.0.24177e9f54xE1O&algo_pvid=105b8033-1547-4281-a88c-0f805d51eebb&algo_expid=105b8033-1547-4281-a88c-0f805d51eebb-2&btsid=0b0a182b16018388906835530eda7d&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_

do you have a link from where you bought the screws?

great desight by the way

PLA, 0.2mm 20% infill

recommendations for printing? fill quality printing etc

is PLA ?

Dont worry I figured it out, and used 4 times an M2 8 mm screw to tie everything together.

By any chance are you left handed? ;)

Hi, great design, can you please clarify on this: BOM 4xM2 5-8mm Screws ? Thank you!