Skip to content

3D Printed "Smart" Wallet (Updated for M3 Bolts)

Creation's quality: 4.2/5 (25 votes)
Evaluation of members on the printability, utility, level of detail, etc.

3D model description

There are plenty similar designed wallets on the web but none fit my requirements 100% so I created my version.

Completely reworked new version.
Now uses easier sourced M3 bolts.
Better ergonomics.
Easier assembly.
More reliable.

See it in action:


The design is by no means perfect. I am still looking to improve it so your feedback is very much appreciated !!!

3D printing settings

!!!==>> BOM 1xM3 8mm 3xM3 5-6mm<<==!!!


Completely reworked new version.
Now uses easier sourced M3 bolts.
Better ergonomics.
Easier assembly.

More reliable.

Check diagram.

!! After print bend Bills Clip slightly before installing so it presses down the bills !!!
See it in action:

3D printer file information

  • 3D design format: STL Folder details Close
    • Bottom _Wallet M3 v2.stl
    • Clip_Wallet M3 v2.stl
    • Lever_Wallet M3 v2.stl
    • Middle_Wallet M3 v2.stl
    • Top_Wallet M3 v2.stl

    Learn more about the formats

  • Last update: 2020/10/04 at 16:56
  • Publication date: 2020/09/29 at 23:16





Issue with this design? Report a problem

Collection associated with this 3D model

Makes created by the community

Best sellers of the category Fashion

Add a comment


is the assembly complicated?

Can you make a version that will fit cards that have thrugh punch numbers? and the backplate standoff is kinda week so if you could give it a chamfer so its more rigid that wuld be nice.

I made it, used 3 x M2.5 6mm screws to fix it and 1 8mm for the corner of the top.

I used PLA with 40% infill. Took around 5 hours to print as I placed all the parts in one STL.

This was printed with Extrudr PLA NX2 Orange

I dont know if I am going to use it, it feels quite rough on the pocket compared to a classic leather wallet....lets see..

made it, i don't have the m8 bolts, but superglue fixes that, the money clip is slightly too big to fit without clipping a bit on the corner, love it though!

do you have a link from where you bought the screws?

great desight by the way

PLA, 0.2mm 20% infill

recommendations for printing? fill quality printing etc

is PLA ?

Dont worry I figured it out, and used 4 times an M2 8 mm screw to tie everything together.

By any chance are you left handed? ;)

Hi, great design, can you please clarify on this: BOM 4xM2 5-8mm Screws ? Thank you!

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your AdBlock banner blocker and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon or Aliexpress.

  • DONATE: If you want, you can make a donation via PayPal here.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!