67件のコメント

Hi
For now I don't have time for anything but you can mail me - use 'personal link' in my profile

Hi,

Here is a link to a commercial license with all versions of Skulls
You have also links there to a free version to test it

https://cults3d.com/en/3d-model/various/skull-v2-commercial-license

For printing in vase mode you have
Skull Vase.stl - older, the one that your friend printed
Skull-Vase_V2.stl - new one, more realistic

Whole skull versions are
Skull V full.stl
Skull_V2_FULL_not-for-vase-mode.stl

Regards,
Grzegorz

Hi,
As I can see you downloaded my FREE set of Chinese Zodiac Telight Covers - so I think you want this one (because I also made an 'earopean' zodiac tealight covers)
If I am right about what you want I could make a commercial license starting with 15€ for a first buyer

I also made a paid models with FULL Set of Chinese Zodiac Telight Covers but as you didn't buy it so I don't think you want a commercial license for this, and it would cost much more

Definitely interested in the Chinese Zodiac Tealight Covers - FULL SET https://cults3d.com/:2651794, I had gotten the free set see how they print and absolutely loved them.
How much were you thinking?
I might also get commerical license for the free ones as well but main focus currently is the Chinese Zodiac Tealight Covers - Full Set

On Full Set you have every model, including the free ones
Commercial licensed Full set can start with 100€ and I can prepare it tomorrow if the price is all right for you

Thank you for the quick response, €100 is quite steep for me right now due to conversion, I was hoping to get it for around $120ish AUD = €70.

If not I'm more than happy to go back and forward till we both find a price or a compromise that makes us both happy.

As I don't want to make it seem like I'm disrespecting you or your hard work.

Sorry for the long reply and thank you

The price is set to 10x the price of normal models (wich is 10€)

Another option is to pay me 10% of selling price from each print sold - on the long term it can cost you more
And You would still need to buy a commercial license on Cults if you would like to change it to an unlimmited life-time selling (maybe with a discount then, but 50% max)

Or you can buy a commercial license with free set only, for now - for 15€
After time, if you would like to buy a full set, I would give you this 15€ as discount code

Thank you for the offer unfortunately it's too steep for me rn and doubt I would be able to keep track of the 10% and mostly after the animal faces ones

Thank you for time

to give us*** permission

Hi. My commercial licensed versions are here
https://cults3d.com/en/design-collections/c47/commercial-licenses

There is also a Tortoise Phone Stand
If you want something that it's not there I can prepare a version for selling - it will start with 10€ for first buyer. Just let me know what model you want

I'm not making lithophane but there is some on-line lithophane generators. You can add a text to the image and then generate a lamp

I'm not sure what you need
Free rounded tealight with tree holes is under your link. There is also a link in description to the rest of models shown on render (second image)

For a base color I used Dahlia Yellow from Spectrum Filaments - it's pretty light for a pumpkin but it fits
For green it doesn't relly matter, I used light and dark one
'Yellow' just should be lighter than base color

Hey, thanks :)

I can prepare a commercial licensed versions, you just need to tell me what counters would you like (I'm thinking about newest 2 and 3 digits flat counters and a modular counter v2 but I also made few more)
Each would cost 10€ for first buyer, except modular counter wich would start with 20€

These are the 3 I would like a commercial license for:

https://cults3d.com/en/3d-model/game/flat-tripple-counter

https://cults3d.com/en/3d-model/game/modular-counter-v2

https://cults3d.com/en/3d-model/game/flat-life-score-counter-v2

Thank you so much :-)

I didn't see a single digit counter, but if you ever make one of those I'd be interested in it as well.

I made this 3 commercial licensed versions. Sorry it took so long
I put a link to collection, they are on top of this
https://cults3d.com/en/design-collections/c47/commercial-licenses

About 1-digit version - I may think about it some day, maybe if I will make a V3 of 2-3 digits

Hi
You can add text in some slicers (like Prusa Slicer) but you would need to remove (fill) original text first in some 3d software (like Blender 3D)
I could prepare a model version without any text but then I would also need to remove a castle and city's coat of arms as they are strictly associated with city Krasnystaw and also remove a hop (as it would not look good without a coat of arms) - I'm not sure if you would like such 'clean' mug

There is a 'clean' model on version from 2022 - you can test adding text there and see if you like it or not

Hi. Thanks. I cannot find the clean model. Please help me

You downloaded version from 2024, in my Beer collection there is more Beer Mugs, including the one from 2022 with a clean version

I can make such model in version 2024 too but I would like you to test if you can add a text on the model from 2022 and if you like the look of this text on the mug

Hi. Instead of buying whole Piggy Set we can make an agreement that you will pay me 10% of the selling prices of your sold prints of Piggy keychain - paid monthly, there is a Paypal link on the profile
But I would recommend buying whole set, on long term it will be cheaper and you can also make phone stands as keychains too (people likes it) and not only with Piggy but with a Boar

Hi, thank you for your response! I fear that it will be too difficult for me to keep track of sending you 10% of sales. I will only need the keychain piggy as its function suits my needs. Will you please reconsider? I will pay you between $5-$10 for commercial license of just the piggy keychain.

Sorry, but making a commercial license for each sepparate model from the design (or small groups of models) would make a mess on the profile and it's not worth it if only one user will buy it
And the lowest price I'm starting with is 10€ so it's not even on price range you want so you wouldn't buy it anyway

I can allow you to sell keychains for one month for 'free'
This 10% of selling price you would pay for some charity so maybe it will be more worth keeping track of sold prints for you (just write numbers on one piece of paper)
Then you will know how many you can sell and when buying a commercial license for full set would pay off and is it worth it

Ok! Thank you for allowing me to sell your piggy print for free for the month of July. I will keep track of sales, and let you know how many I sell so I can figure out what 10% of the sales would be. Much appreciated!

Hi,
Thank you for buying a commercial licensed version :)
For a credit “@c47 on Cults3D” will be enough - unless you are selling on online shop, then you can add a link to my profile or design

Regards,
c47

Hi, some of designs are with links to commercial licensed versions - you can also check my 'commercial licenses' collecion in my profile
If you want something that is not there you can write what you need and I may prepare a version for sell

The 3mf file for Bambu is as an example (and ready to print version of counter)
There is no pre-colored models there. I'm using different models to add a color so you don't need to color anything, just select a color for whole addon model

To print different version you can just select both files, for example
ModularCounterV2_Stand-male-ANGLE
ModularCounterV2_Stand-male-ANGLE_Multicolor-addon (this one is for color of numbers and some details)
and drop them to Bambu with opened print profile
Then choose 'yes' when asked 'if load it as one object' and choose a color for each part (like dark for base model and light for addon)

You can also change the models that are already in 3mf. Right-click on the model on list, then 'Replace with stl'

As I was checking it in Bambu Studio I noticed that they changed something with adding different models to plate. Some models are not lined up on Z-axis as they should - I'll need to figure out why the problem occurs and if it will be the same on Prusa Slicer, then I will try to fix it and update all the files
So for now you should wait with printing (unless you want it, you can just set them in the right place manually - if the base model is on Z 2mm set it to Z -2mm, remember to select just this model, not both assembled)

You can now download files again. I updated 6 of them (list is in model description). They will be lined up with addons

ho yeaaaahhhhhh thank youuuuuu !!!!

Hi, can you change the text in the Tealight series? I'd like to change the text to read [勇].

Hi. you want a 'bravery' hanzi [勇] instead of a 'blessing' [福 ]?
And you want it with every zodiac sign or some specyfic one - I know that it fits the Tiger

need[勇] , Tiger it OK!

can use zodiac tiger and [虎] change hanzi[勇] thx you ! I can pay first

So you were writing about Free Set of Tealights, not Full Set (where there is an additional [福] and other models)
I could make new models but only for a Full Set - just like I made with [福]
But to get the models you would need to buy this Full Set wich cost 21€
If you could give me few other chinese words related to zodiac signs or spring festival or anything that would fit (so far I know that [春] would be usefull) I could give you a 25% discount on the Full Set and add tehre this models

If you like the idea you can e-mail me at c47_3d@outlook.com

Hi
You commented on the profile, not design, so I'm not sure what you want to sell
In your downloads section I can see my Ophiuchus tealight cover - if you want to sell it you would need to pay me 10% of the selling price from each model sold
You can write me to c47_3d@outlook.com for more information or to discuss different selling conditions

Skull Vase and Skull V2 are made for printing in Vase mode so they can be used for storing things
You can also print it in normal mode, without top layers and infill, for a stronger 'box'

3d printed mugs are for decoration or to handle for example cans easier. You should not drink straight from it - even if it's cold
But If you will buy a steel / glass or even special plastic inserts, measure it and print the proper size of the mug you can then use it as you like - then, if you would like a hot coffe you should print it at least with ABS or ASA. as PLA (for sure) or even PET-G (probably) would get soft