Mechanical collectible design !!
Disclaimer:
- Resale of my files without my permission is NOT allowed.
- Printing for commercial use is NOT allowed without my permission.
For authorizations and information on my designs contact me.
👋 Bonjour à tous ! Ce fil de discussion est public, alors restons gentils et respectueux. Pas de publicité, de spam ou de choses désagréables !
🇮🇹 Pays du membre : Italie
🌐 Langue préférée du membre : Anglais. Vous pouvez traduire en ligne via DeepL.
💡 Vous faites référence à un modèle en particulier ? Ajoutez le lien, le titre ou le numéro du modèle.
🖼️ Vous souhaitez publier des photos ? Utilisez un hébergeur gratuit comme ImgBB et collez les liens dans le message.
✍️ Astuces de rédaction : Utilisez le format Markdown pour structurer vos textes et les rendre plus lisible
tu carta deveria tener 40 archivos y solo hay 38 me falta 2 archivos muy importantes
351 engine, block piece where the pins go to assemble all the other parts.
donde puedo descarga el blok para poder terminar el motor 351 289
donde puedo descarga el blok para poder terminar el motor 351 289
donde puedo descarga el blok para poder terminar el motor 351 289
te compre el motor 351 y me dice que falta una ´pieza pára armarlo no esta completo
Hola, ¿qué pieza falta? ¿Y quién dice que falta una pieza?
donde puedo descargar el blok para completar el motor
me falta la pieza para poder montar toda las piezas del motor 351 me falta el blok donde ban los pitones
¿Descargaste los planos de montaje de la sección de fotos? Si no, no sabes cómo ensamblarlo. Hay que insertar los pasadores en el bloque de cilindros. El archivo es este: 351_Cylinder block.stl
te comreo el motor 351 y me dice que falta una ´pieza pára armarlo no esta completo
Hola, ¿qué pieza falta? ¿Y quién dice que falta una pieza?
Hello, just purchased the 289 Weber and manifold set, is the jet well cover available? thanks
I bought your Ford coyote file, do you sell a separate twin turbo for that engine?
Just a suggestion, don't know what the timing is on the animation of your parts but you might consider slowing them down. Its a lot of motion going on that is very distracting especially when you're trying to look at the parts
Hi, really like the CORVETTE C7 Z06 - LT4 ENGINE model you made, wonder if it's possible to print it with FDM 3d printer like bambu lab p2s? Also, does these model combine with dowel or you need to use glue? Thanks!
Hi, thanks for your feedback. The CORVETTE C7 Z06 - LT4 ENGINE project consists of many pieces that need to be assembled. Some have interlocking parts, others have alignment pins. You can see the assembly drawings in the photo section. However, all parts need to be glued together. The project can be printed with FDM printers. Supports are required for some parts. Obviously, better results are achieved with a larger scale.
Hello, would you consider creating a Twin-Turbo HEMI Motor like the NRE 572 Maximus? Thx. https://nelsonracingengines.com/products/nre-twin-turbo-mopar-hemi-572
Look at this: https://cults3d.com/en/3d-model/various/chevrolet-zz-572-v8-twin-turbo-engine
- MOTABAS
Yes I did see that one, unfortunately I would like a Mopar engine to put into my Plymouth Roadrunner Build and I have seen your 440 engines which look great, but was unable to find a Twin-Turbo HEMI to complete my project :(
We have this Mopar Hemi 440 Twin-Turbo:
https://cults3d.com/en/3d-model/various/dodge-mopar-440-magnum-twin-turbo-engine
- MOTABAS
Yes I did see that one, but the 440 and 572 HEMI are 2 different engines, this RR comes from the factory with a 440 6pk motor, but with this Build I wanted to upgrade to a HEMI that has a Twin-Turbo setup, and I know you have some great motors in your library, was hoping it may be something that may interest you to have available, I'm sure it will sell very well.
We will evaluate whether it is possible to implement this in the future, thanks for your suggestion.
- MOTABAS
Thx for your consideration, Much Appreciated 🍻
May i sell 3d prints from your files ?
To sell prints of our files you must request a commercial printing license. For more information, you can contact us on Facebook (Motabas Yen).
Hi there, can the file for Millington Diamond engine be printed on a bambu h2s, if so what parameters are best with PLA, thanks
I just bought the HOLLEY SNIPER EFI - THROTTLE BODY
I want to print it full sized. What scale is the model?
The native scale is approximately 1/10, obviously you can make variations to adapt it to your needs.
Is the bell housing pattern or transmission bolt pattern the same as the actual engine? Is it based 100% on the actual engine?
This is not a functional project, it is a reproduction designed to be made with 3D printers and consequently adapted to make scale printing possible.
Is the size of this 3d Vespa engine like the original?
It is a 1/10 scale reproduction, it can also be printed in a different scale by acting on your print slicer, the description indicates the native scale and the percentages to change the scale.
- MOTABAS
Can I contact you privately? I'm from Indonesia.
You can contact me on FB.
Just getting around to printing the Alfa Romeo
motor. question: You have two files Block Cylinder (Pin 8x5x15mm and x 30mm) What are these two pins for?
Hi, first of all thank you for your purchase, the pins are only used to facilitate the alignment of the pieces and are not essential, there are two types of pins but you can choose the one you prefer, I prefer to use the 8x5x15mm pins, only the lengths change.
- MOTABAS
Thanks, what parts need to use the pins to line up?
I bought your LS3 and LSX with Edelbrock intake. Your scale says to use 40% for 1/25th scale. I did that and printed but it's much smaller than it should be. The get 1/25th scale I had to set scale to 45%. I used both Chitabox and Lychee and it's the same.
Ok, thanks for your information.
do you happen to have any engine and trans pair for a 1957 chevy bel air?
I'm interested in your model of a 460 Ford complete engine. How accurate is it? Is the bolt pattern correct, etc? Or is this just a close representation to print a toy?
It's not a functional project.
is it possiable to do the 2jz single turbo with exposed pulleys,and show the coil packs on top,this spec or version is known as race engine thanks for any help
You can contact me on Facebook (Motabas Yen) to show me some photos and let me know what you're referring to.
- MOTABAS
ok thank you will send over couple of images
Ok.
could i possibly buy the stock 5.0 coyote dark horse dual throttle body intake by itself
The fuel system with dual throttle bodies separate from the engine is not available.
MOTABAS.
Hi. Your inline 6 chevy engine, I saw you just updated it with 3 new Rochester carbs, Will you be doing another setup with the 1953 Corvette Carter YH Carbs ? Or are you done with this project.
Kind Regards
No project is ever finished with us. In fact, I'm planning a future turbo kit for the Chevrolet Stovebolt engine. As for the CHEVROLET STOVEBOLT Carter YH Carbs kit, considering you're a loyal customer, we'll build this setup for you. Can you send me more details on Facebook?
Thanks for contacting us.