I'm a traditional sculptor and now also a 3D desingner from Brazil 🇧🇷,i make all my art in Blender and i love to make anime and cartoon style.
I hope you enjoy my art and thanks so much to support me!!! ^-^ 🙃obrigado!!!
👋 Bonjour à tous ! Ce fil de discussion est public, alors restons gentils et respectueux. Pas de publicité, de spam ou de choses désagréables !
🇧🇷 Pays du membre : Brésil
🌐 Langue préférée du membre : Anglais. Vous pouvez traduire en ligne via DeepL.
💡 Vous faites référence à un modèle en particulier ? Ajoutez le lien, le titre ou le numéro du modèle.
🖼️ Vous souhaitez publier des photos ? Utilisez un hébergeur gratuit comme ImgBB et collez les liens dans le message.
✍️ Astuces de rédaction : Utilisez le format Markdown pour structurer vos textes et les rendre plus lisible
Hello I am using Orca to print some of the One Piece wanted posters and for some reason the bottom layer (back of the poster) is not reading as a flat. Any ideas? Happened with Chopper, Gear 5 Luffy and Shanks so far. Zoro and the first Luffy poster worked just fine.
Hi, I have checked and I think it was because those posters were slightly inclined, so I reset their position and now I think everything is OK.
I have uploaded all my old posters to the new position. Please delete the files you have downloaded and download them again.
thanks for your support. :)
Thank you so much!
Hello, i bought the YGO model of Veidos The dragon of endless darkness and had trouble printing it. The result is kinda bad and i wanted to know what specs you are using to get a good result and nice details. Im using a flashforge AD5X with basic PLA.
Thank you for your help ( im a beginer at 3d printing)
Hi, I print my cards with my resin printer and the result is better than with PLA. I paint with the dry brush technique to show the details better. I don't know how to print with a PLA printer or what the best settings are, as I only have a resin printer. If you want, I can give you some other paid cards to compensate for the card you bought. Some cards have a lot of detail in the artwork, so I think they only get a good result when printed with resin. Maybe try printing vertically with some supports for the PLA, or printing at a higher scale. But I really don't know I have no experience with PLA.
hey thanks for the fast answer, no need to compensate, i ll try with slower printing time and vertically
All right, I have a lot of free cards that you can try with the ones you like the most,
And make printing tests too, and thank you for your support.
👍
Do you have a merchant license that can be purchased?
Hello, I would like to know if you can make a Yu-Gi-Oh! card, "Air Assault Hayate." Thank you very much, looking forward to it.
hi,i did the Sky Striker Ace - Hayate,it was the card i found with the name (Hayate)
Thank you so much, I love it so much! By any chance, do you have the others?
thanks!
I don't plan on making other Sky Striker cards because the artwork on most of these cards isn't so good for 3D lithophane and the final result isn't very satisfying.
I understand, but I found the one I love, so thank you again.
hi !
can we do a command for some one piece card?
thnaks a lot !
Hi, if I can find the right image of the card you want, I can try to do it. Which wanted poster do you want?
Portgas D. Ace
The first chopper wanted
Mihawk
And all of the others original wanted😇
I really enjoy your work ! The first i buy is so beautiful 😍
i did the Mihawk.
https://cults3d.com/en/3d-model/art/dracule-mihawk-wanted-poster-one-piece
https://cults3d.com/en/3d-model/game/mihawk-wanted-poster-one-piece
tomorrow i'll try other posters.
thank's for your support! 🙂
You are the cherry on the top of my ice-cream !🍒🍦❤️
Thanks so much !
Hi, I just bought this model and would like to know if the body panels can be separated, as I want to paint them the corresponding colors. If you could help me with this, I look forward to your reply.
hi.thanks to support me!
what would be ( body panels )? do you mean the eyes or all the green spots ?
If it's all the spots, I can't separate them, but if it's the eyes, I can try to do that.
do you do commissions for 3d models
no,sorry!
What settings do you recommend for printing your jelly bean model, specifically the body, for Bamboo Studio?
Hi,I don't know about filament printers and settings. I only have my resin printer. I just add supports for each part. Then I print them. thanks to support me bro! :)
Hello, how do you get the text, name and artwork on the card to appear black pls?
Ty for your modele it's amazing!
https://cults3d.com/fr/mod%C3%A8le-3d/art/prank-kids-lampsies-yu-gi-oh
in the Blender i enable the cavity shader.
Ty bro! with a Bambu Lab A1 3d printer do you think I can print this as well as you?
I don't know if it will look as good as the resin one. I printed it with my resin printer. It's good for small details. Then, I paint it with a dry brush technique to make the details and text better.
Hello, are you going to make a kurikara card pls?
hi,kurikara. i have done this card:
https://cults3d.com/en/3d-model/art/kurikara-divincarnate-yugioh
Incredible, TY
Love your designs!
Thanks for sharing!
thanks! 😊👍
Hello, your designs are incredible. I wanted to know if the (Stitch Figure 2/Disney). sunglasses are compatible with the other Stitch, (Stitch Figure 1/Disney) ?
Hi,both models have the same scale,but the glasses will only be useful to the Stitch Figure 2, the first Stitch have a different ear position to use the glasses.
I see, could you make these sunglasses compatible with Stitch Figure 1/Disney? How much would you charge?
I plan to print in PLA
Hi, I adapted the glasses to the first figure. You can see the fourth image render. Just download the files.
Hi Wsonuchiha3D, it's amazing, thank you so much! It's really cool!😁 When I finish painting it, I'll send you a picture. Your designs are really good. I'm going to buy your Jigglypuff, I think it's really cute.
Thanks for your support, bro! I'll be glad to see it painted, too.☺️
I don't know if my response was submitted properly.
(It says awaiting approval.)
You're right. I referenced a cropped image without knowing the source. I apologize for the problem.
allright,no problem! 👍
Hello, hope you are keeping well,
I was just wanting to ask about the burstinatrix model as the listing advises it is 242mm high, can I ask if this is includes the base?
I was looking to resize it to use in Marvel Crisis Protocol, which is a 40mm scale game.
Any help appreciated.
Thanks
Hi, I'm doing well, thanks.
Yes, the 24 cm height includes the base.
but, it does not include any textures, the model is only the STL files for 3D printing.
I've attached a link to an ugly, low-poly version that you can use to check its size.
hey ich habe deinen sternenstaub drache drucken wollen, nur weis ich nicht genau welche farben ich wählen soll
Im interested in your yugioh items. But I need the comercial use license. Can we reach an agreement?
hi,no problem.
feel free to sell the printed models,just don't share and sell the files.
Perfect! I'll be buying from you a lot soon!
thank's!!! 🙂👍
Salve.... grazie ho risolto il download adesso direttamente dal sito... grazie per tutto....
Salve.... ho fatto l'ordine ma ho problemi a scaricare il file... mi potete aiutare??? grazie....
Ciao, come stai? Mandami un messaggio su Facebook o Instagram e ti mando il file così potrai scaricarlo.
instagram : @wellersonartess
Prova anche a scaricare di nuovo, forse il sito ha problemi a scaricare
Risolto.... tutto OK....
Hi, i really like your stuff. I just wanted to know if u have made some Monarch Cards from Yu Gi Oh?
Hi,thanks to appreciate my art!. I still didn't make any Monarch cards,if i found some artwork that can be good for a 3D card of Monarch i'll make it for the next days.
Thank you, my boyfriend would love the Erebus the Underworld Monarch.
I did it! You can get better results for the details with a dry brush technique.
Hello, i'm searching for Line Art yugioh images to make icons and use them for visual design, and im taking your projects to vectorialize them on illustrator.
But what i need is a way to outline card images by myself so i can always use the images that i need, so do you know a way to do it even without being able to use 3d design? Ty so much!
Hi,unfortunately i don't know how to help you with line art images for your project. I only use the original yugioh artworks cards to make my 3D cards. :(
I also use original artworks too, but they are too complex to outline them, so i would like to know if there was a way to transform them exactly in the same way that you do, but without using a 3d software
I really don't know how to do this. It is too complicated.
Hello, I was wondering if you allow people to sell physical versions of your files :)
hi,yes no problem!..If needed, mention me as the 3D modeler. thanks :)
Hi... I just pay for the design of Turbo Granny.
I thought its already colored and I can use my AMS, but it turns out there is only 1 color.
Are any of that designs already in color?
hi,thanks to support me!,my models is only stl files without color,is just to print and paint as a hobby. i don't know about AMS,sorry.
Its okay. Thanks for the reply.
Great design
Hey, big fan of your work so far I've printed Magi Kuriboh, Winged Kuriboh and the Scapegoat figure. I saw you have ancient Fairy Dragon as well, sre you planning on doing the other Signer Dragons (Stardust, Red Archfiend)?
hi,thanks for supporting me and like my art,i love the signer dragons,my favorite is the Black Rose Dragon.
but i dont plan to make others for now,maybe one day :)
Hello! Huge fan of the YUGIOH models. Any chance there is a Elemental Hero Flame wingman in the future?? Would love some more GX era prints. Keep up the amazing work!
Hi, thank you for supporting my art!
The Elemental HERO Flame Wingman, I've already done the 3D card, but maybe I'll do a figurine version of him in the future. :)
A figurine of flame wingman would be amazing! Favorite card of all time. I’ve been in the process of painting the blue eyes and red eyes. Your models are fantastic.
very cool! feel free to share your painting work here when you've finished it,i'd like too see.
Hello, I love all the toon figures you made!!, I hope you continue with this, If you dont mind Can i ask you if you are planning doing more?
I was wondering if you could do some figures related to "UMI" like:
Fortress Whale/Citadel Whale
Legendary Fisherman I/II/III
Ocean Dragon Lord Kairyu-Shin
A Legendary Ocean
Thanks ^^
Hello, and thank you for appreciating my work! Yes, I intend to create more toon monsters, but I don't plan to make any Umi cards,sorry.
Oh ok thanks for the fast answer ^^