Aller au contenu
Ramzay1945
@Ramzay1945 Partager ce compte

I'm just making 3d models for printing. I mainly make models of tanks from the Second World War. The models were originally created for the 1/100 scale. You can change the scale when printing.
Here I will post my own models.
The models are sold exclusively for personal use. If you want to sell copies of my models, write to me.
If you haven't found what you need, you can order the development.

My Discord: https://discord.gg/X8AUBy8Ymm
My VK: https://vk.com/ramzay1945_studio
My Boosty: https://boosty.to/ramzay1945
My e-mail: Ramzay1945@gmail.com
Full and up-to-date list of available models:
https://docs.google.com/spreadsheets/d/1j3YkbGwYWAppUUyH_89J9VTQhGvSoXdFCIlOV58RZp8/
In this list you can also find information about which models are planned for the future.

Vendeureuse Maker Populaire Makes Designer Téléchargement

👋 Bonjour à tous ! Ce fil de discussion est public, alors restons gentils et respectueux. Pas de publicité, de spam ou de choses désagréables !
🏴‍☠️ Pays du membre : Unknown
🌐 Langue préférée du membre : Anglais. Vous pouvez traduire en ligne via DeepL.
💡 Vous faites référence à un modèle en particulier ? Ajoutez le lien, le titre ou le numéro du modèle.
🖼️ Vous souhaitez publier des photos ? Utilisez un hébergeur gratuit comme ImgBB et collez les liens dans le message.
✍️ Astuces de rédaction : Utilisez le format Markdown pour structurer vos textes et les rendre plus lisible

Écrivez votre message :

👉 Connectez-vous pour écrire un message

29 commentaires

AdeptusArkainis
AdeptusArkainis

Would you happen to have models with the tracks and wheels separated from the tanks for ease of supports?

Ramzay1945
Ramzay1945

Hi.
T-12, T-24, M3 Lee, Object 279 are made with separate tracks.
All wheeled vehicles are made with separate wheels.

AdeptusArkainis
AdeptusArkainis

Is it possible to add exploded models or is this not in your future plans?

Ramzay1945
Ramzay1945

Perhaps I will do this in the future with the PT-76 and BTR-50 models. Otherwise, I only do it to order.
sonn0853
sonn0853

hello.
before i get to the main point of this message, i just wanna say that you make some really good looking and very nicely detailed millitary models,
but anyway i was wondering if you could possiply make a ww2 soviet T-80 light tank?

  • 1 j’aime
Ramzay1945
Ramzay1945

Hi!
Thank you for the kind words. I am very pleased :)

I made this tank a long time ago.
https://cults3d.com/en/3d-model/game/t-80-1-100

  • 1 j’aime
nicoaguilarlas
nicoaguilarlas

hola. veo que tenes varios modelos de vehiculos. estoy buscando MB 1720. podras mandarme mensaje asi cordinamos. te dejo mi celular +54-3813257977. desde argentina- buenos aires

  • 1 j’aime
Ramzay1945
Ramzay1945

Hi! I wrote you a message.

  • 1 j’aime
nicoaguilarlas
nicoaguilarlas

estoy buscando MB 1720 ejercito argentino ! podras hacer ?

  • 1 j’aime
Ramzay1945
Ramzay1945

Hi. I wrote you a private message on Whatsapp, but it wasn't read. Write me an email ramzay1945@gmail.com

  • 1 j’aime
gustadias
gustadias

Hello,

I'm reaching out hoping you might be able to assist me with a passion project.

My uncle and I used to play a classic board game focused on the Yom Kippur War, and I'm now looking to create a fully 3D-printed version of its units. The goal is to replace the original cardboard tokens with detailed miniature models, adding a new layer of immersion and nostalgia to our games.

To achieve historical accuracy for the 1973 conflict, I'm specifically searching for the following 3D models (or suitable alternatives):
For the Israeli Army, I need:

Armored Personnel Carrier (APC): M113 APC
Tanks: Centurion Mk10
Engineering Unit: M728 Combat Engineer Vehicle (CEV)
Long-Range Self-Propelled Artillery: M107 Self-Propelled Gun (SPG) 175mm
Medium-Range Self-Propelled Artillery: M109 Self-Propelled Howitzer (SPH) 155mm

For the Egyptian Army, I need:

Infantry Battalions: Egyptian Infantry 
Armored Personnel Carrier (APC): BTR-60PB
Tanks: T-55 Main Battle Tank
Surface-to-Air Missile (SAM) Batteries: 2K12 Kub (SA-6 Gainful) self-propelled
Heavy Tanks: T-62 Main Battle Tank
SAM Missile Bases: SA-2 Guideline (S-75 Dvina) missile system
Towed Artillery Battalions: D-20 152mm Towed Howitzer

Any guidance, links, or direct assistance you could provide in acquiring these specific 3D printable models would be immensely valuable.

You can learn more about the specific board game we're updating here:

https://boardgamegeek.com/boardgame/21789/a-guerra-do-yom-kippur

Thank you for your time and consideration.

  • 1 j’aime
Ramzay1945
Ramzay1945

Hi!
Here are the models that I have now or are planning for the IDF. I do not plan to develop other models.

M113 Zelda (Ready)
M113 Zelda Uparmored (work in progress)
M163 Hovet (Ready)
M163 Machbet (work in progress)
M150 Giraf (Ready)
M577 Mugaf (work in progress)
M50 Super Sherman (work in progress)
M51 Isherman (Ready)
Mag'ach 3 (work in progress)
Tiran 6 (work in progress)
M113 HVMS (work in progress)

I also have T-55 and T-62 tanks. If you want to buy many models at once, write to me on the Boosty blog (there is a link in the profile description), I will make a personal discount.

If you want to order the development of a model, I am ready to discuss this on my blog as well.

Ramzay1945
Ramzay1945

The M728 Combat Engineer Vehicle (CEV) has apparently never been shipped to Israel. Wouldn't it be better to replace it with something else?
https://www.the-blueprints.com/blueprints/tanks/tanks-m/47635/view/m113_fitter/
julienG19
julienG19

Hi, I wanted to know about tank tracks: were they made of a single piece or multiple pieces to be assembled? Once assembled, can they be made to roll? Thanks

Ramzay1945
Ramzay1945

Hi. The tracks are solid. And in most models, they are integrated with the body.
I make models for 1:100 (15mm) scale. I've never seen moving tracks on this scale before :)

julienG19
julienG19

Sorry, I misread the description; I thought it was 1/35 scale.
njeans
njeans

Hi. I like the nebelwerfer pack you have.
I need to build a full scale nebelwerfer could you get in touch please as I need some help
Kind regards
Nick.

Ramzay1945
Ramzay1945

Hi. I can't help you assemble a life-size Nebelwerfer model. To create a 1/100 scale model, I used photos and drawings from the Internet. And I came up with some of the details myself. I don't even know the exact sizes of the parts. The dimensions are determined very approximately. By eye. You can see in the preview how many simplifications and assumptions there are.
zemanlubos
zemanlubos

Ahoj,šlo by udělat model 3D 1:1 potřebujeme výkres k výrobě pro mé muzeum.Můžete nám prosím pomoci.Jedná se o vozík Nebelwerfer 28/32cm.

Ramzay1945
Ramzay1945

Hi! I didn't quite understand what you meant or what kind of help you needed. Please write to me in detail via email or on my blog.

  • 1 j’aime
zemanlubos
zemanlubos

Here is my email, please write to me by email sepp-lubos@seznam.cz
BlueSRS
BlueSRS

Hello,

I’m very interested in your German WW2 models.
Is there a way to purchase a Commercial Use (CU) license for these models?
I would like to print them in 1:87 and 1:160 scale.

Best regards,
Benjamin

Ramzay1945
Ramzay1945

Hi! I am very glad that you like my models :)
Write to me by email or on my Boosty blog. There are links in the profile description.
Best regards
Andrew
piotrmirowski
piotrmirowski

Hello. I bought the PT-91 Twardy model yesterday and I have a question about the turret. Would it be possible to modify the commander's hatch to face forward? Regards.

Ramzay1945
Ramzay1945

Hi! I added a turret with a rotated cupola.

piotrmirowski
piotrmirowski

Thank you

piotrmirowski
piotrmirowski

I'm also interested in the T-55 Merida, T-55 PW LWD, T-72A, and T-72M1 models. Will these models also have the additional turret with the modified commander's hatch in the T-72A/M1 and the 12.7 mm DSzK-M modified for transport position?

Ramzay1945
Ramzay1945

I can make variants of turrets with turned hatches after you buy the model

piotrmirowski
piotrmirowski

Ok

piotrmirowski
piotrmirowski

I bought more than I thought :-). I'm waiting for the modified turrets. I have one more request. Could you please remove the stars from the WKM ammo boxes on the side of the T-55 turret?

  • 1 j’aime
Ramzay1945
Ramzay1945

Hi, can you send me an email?

piotrmirowski
piotrmirowski

wendul@wp.pl

  • 1 j’aime
Ramzay1945
Ramzay1945

I have sent the models. I hope that everything is exactly as you need :)

piotrmirowski
piotrmirowski

Yes Sir :-)

  • 1 j’aime
brunodedale
brunodedale

Hello

Recently downloaded a few models and i must say i find them very good !

Following this i had 2 questions/suggestions :

  • I noticed on the AMX-30B2 and Brenus models that it the mantlet piece seemed a bit too long, which resulted in the first section of the gun (right after the rubber part) being a bit too short. I was wondering if by any chance it would be possible to make a small correction

  • Second question is : do you have any plans on making the Leclerc XLR and / or EBRC Jaguar models ?

In any case, thank you for the models !

  • 1 j’aime
Ramzay1945
Ramzay1945

Hello:) Thanks for the feedback!
I think I can do something. Write to me in detail by email or blog on Boosty, what exactly you want to do with the gun mask and how much I should shorten it.
In the description of the store there is a link to a table with all my plans. I am not planning modern French tanks yet.

  • 1 j’aime
davfoe
davfoe

Any chances you can do a T-80 and variants?

Ramzay1945
Ramzay1945

Hi! I think there is a chance if someone orders the development :) But I don't plan to make the T-80 myself.
sylly
sylly

Hello.
First, great stuff!
Doing some designing myself, I see your designs too when I do my research...
Lately I see a guy offering your DAF YA616 on Facebook in 1/50 scale. Normally I assume that he has made a license deal with you. But this guy is known to buy a 1/160 or 1/87 model. Scans it and prints with a FDM printer in 1/50 scale and offers that. He has done that with a few online stores already and Aritec.
I think, because of his earlier actions, he didn't buy the license one...
Thanks.
Sylvain

  • 1 j’aime
Ramzay1945
Ramzay1945

Hi! Thanks for that. Everyone who has a license in one way or another is listed in my Boosty blog description. It is unlikely that this person has such a license. Anyway, can you give me a link? ramzay1945@gmail.com
artstudio
artstudio

Hello.

I'm looking for a 3D designer. I have a few projects to work on. If you're interested, please contact biuro.katmodel@onet.pl.

Best regards.
jwdeboer
jwdeboer

Can you check the YP-408 PW-AT hull? The frontal hatches are way too long (See https://www.dafyp408.nl/mt/YP408-101at.jpg) The frontal and rear hatches should be the same size and the middle hatches should be longer.

  • 1 j’aime
Ramzay1945
Ramzay1945

Hi! I fixed it, thanks :)

  • 1 j’aime
jwdeboer
jwdeboer

Thank you for the update :P
lemmi
lemmi

Hey Ramzay,

do you have a one-piece STL of the Zrinyi II with perf skirts? I've seen the old free version of it and bought your new version, but there is only the option with printing the gun and the hatches extra.

Best regards and thanks for your work!

  • 1 j’aime
Ramzay1945
Ramzay1945

Hi. I don't have a one-piece STL of the Zrinyi II with perf skirts. But I can do it soon, if it is very necessary.

lemmi
lemmi

No problem, i can print it like it is and glue it together. Had just hoped you Just have forgotten to put it into the folder.

Ramzay1945
Ramzay1945

The Hungarian project was a kind of experiment. All models are made with open hatches. I really have to come back to this in the fall to make simpler models without open hatches.
somtecpeter
somtecpeter

Hi recently bought a couple of your amx13 models. I would like a version of the French cold war amx model but with the 2 roller 6 hole rear idler from the fl-11 light tank , with the metal track from the cold war model not the rubber pad track as in the fl-11 model, as used by Israel in 6day war. Hope that makes sense is that something you can do? Happily buy another version if you can do it.

  • 1 j’aime
Ramzay1945
Ramzay1945

Hi:) Thank you for your purchase. I haven't finished with the AMX-13 series yet. I plan to create at least 5 different models, including an armored personnel carrier and a version with a Chaffee turret.

  • 1 j’aime
foilhaed
foilhaed

Hey, I have some new models (T-72 related)! I'd be the easiest if we got back in touch via email.
IronBanana
IronBanana

Your files really are great! Do you plan to continue the "E" series with E-25, E-50, E-75 etc? And more generally your series "what if?"

  • 1 j’aime
Ramzay1945
Ramzay1945

Hello) Yes, I plan to start the rest of the models next month. There will be a fairly large series of models. I have a table in my blog, all the plans are there.

  • 1 j’aime
IronBanana
IronBanana

Indeed, I hadn't seen your model tracking file. I can't wait for next month because your Kätzchen is really great.

  • 1 j’aime
uzonur
uzonur

Hello Ramzay, I hope everything is fine. Would you consider selling the AMX 30B2's track wheels and era blocks separately?

  • 1 j’aime
Ramzay1945
Ramzay1945

Hi! Sure. Send me an email ramzay1945@gmail.com and we'll make an agreement :)
irvingchrisp
irvingchrisp

Thanks for that and for listing the revised file.
Regards,
Chris
irvingchrisp
irvingchrisp

Do you a aversion of the Toldi IIA hull with side armour with detailed tracks (Not flattened underneath) which you could post / send me.
Thanks,
Chris

Ramzay1945
Ramzay1945

Hi! I will try to do this as quickly as possible.

Ramzay1945
Ramzay1945

Hi! All models based on Toldi have been updated.
Ramzay1945
Ramzay1945

Hi! This model is in my plans, but I do not promise that I will be able to make it this year. If you want to make a development order, you can write to me on my boosty blog or by email.

dunsk
dunsk

where can i find your email address?

Ramzay1945
Ramzay1945

ramzay1945@gmail.com
jlfowler
jlfowler

I am looking at Design # 2619551 - Remote control MG34 mount. Can I get this resized to 1/16 scale? And can you remove the MG34 from the mount - I am just interested in the mount. I will pay.

Ramzay1945
Ramzay1945

Hi! What you downloaded is made for a scale of 1/100. It doesn't make sense to print this on a 1/16 scale. But I can make a new model for you, it won't be difficult. Write to me by e-mail or in discord
roberteleeh
roberteleeh

Hello. my name is Robert from the USA. your version of the 44M Tas looks totally awesome. I just got my 1/72 Tas via Battlefield3D, And I noticed that it looks smaller for a 1/72 model. compared to the 1st Tas I bought, it looks like it's 1/76.

Ramzay1945
Ramzay1945

Hi! I am very happy that you like my model :) I'm making models for 1:100 scale. The printer independently enlarges it to the desired size. But with the 44M Tas, it's really my mistake. It turned out to be noticeably smaller than the required size. 6.6 x 3.3 x 2.7 meters instead of 7.1 x 3.5 x 3.0 meters. I can't say for sure the reason, maybe I came across other dimensions somewhere, or I scaled the drawing incorrectly. I'll have to fix it when I get the chance.

roberteleeh
roberteleeh

ok thanks for responding. if and when you fix it, can you let me know?

  • 1 j’aime
Ramzay1945
Ramzay1945

Hi! I plan to do this before the end of the year.
JCh
JCh

Hi,
I would like to buy .stl files for printing of Skoda T-21 tank, S-1 SPO and SkodA T-32 in 1:72 scale. Is it possible?
With regard Jiri

Ramzay1945
Ramzay1945

Hi! My models were originally adapted for printing at a scale of 1:100. But many people print at 1:72 and even at 1:56... you need to scale the model in slicer when printing. For a scale of 1:72, it should be about 138.9%, if I'm not confusing anything. But it's better to ask those who print models about this.