Hello ! 🌸
Im 3d artist since 2014, i work on zbrush/maya/unreal
Here you will find my designs for cosplay and my original creations.
For commercial licences : https://www.patreon.com/OpalescenceArt
I hope you like them !
👋 Bonjour à tous ! Ce fil de discussion est public, alors restons gentils et respectueux. Pas de publicité, de spam ou de choses désagréables !
🇫🇷 Pays du membre : France
🌐 Langue préférée du membre : Français. Vous pouvez traduire en ligne via DeepL.
💡 Vous faites référence à un modèle en particulier ? Ajoutez le lien, le titre ou le numéro du modèle.
🖼️ Vous souhaitez publier des photos ? Utilisez un hébergeur gratuit comme ImgBB et collez les liens dans le message.
✍️ Astuces de rédaction : Utilisez le format Markdown pour structurer vos textes et les rendre plus lisible
Hello, I am printing the articulated wolf mask model, with the teeth facing up and down, like you have in the pictures on the model, using tree supports. I am having a problem where the nose is printing with some holes in the nostrils, maybe because the walls are too thin there so the slicer does not generate a line. I tried changing print orientation and turned on detect thin walls but it still does not make it printable. What would you recommend, could that be fixed?
Hello ! Merci pour ton retour il arrive que en fonction des slicer il y ai un petit trou qui se forme au niveau du museau en effet . j'utilise Bambulab et je n'ai pas se problème je vais voir pour épaissir un peu le models aux endroit susceptible d'avoir des trou. je fait ca dans la semaine !
Thank you, merci beaucoup! If it may help, I could send an image of the print or the slicer rendering to show where the holes are appearing.
Hello, just checking again if you have had a chance to change it? I can also post a picture of the print problem area if that would help you know where to make it a little thicker. Thank you!
Hello ! Désolé j'ai eu beacoup de travail les fichiers ont été mis a jours :)
Thank you, I will try printing it again soon and let you know how it goes! :)
Hi, I like your work, and I have a simple question: I drew the Sinesha mask from Raid Shadow Legend. I wanted to put it on sale on the platform, but I'm hesitant about the authorization to use a Plarium design.
Merci beaucoup ! Je pense personnellement que ca rentre dans la catégorie fan art vu que cest du cosplay :)
Hi, I saw a cosplayer using one of your STLs, but I can't find it in your shop. I'm referring to the Fire Fist Ace. Do you still have it available? I need it for a Street Fighter Ken cosplay. Thanks.
Hello ! Yes its the "fire fist/Punch" : https://cults3d.com/fr/mod%C3%A8le-3d/art/fire-fist-punch-glow
Thanks
your welcome :D
missing the head attachment on the top part! shame as already printed it and now dont have time to re do :(
you can glue them inside
Il y a t-il des tailles différentes a télécharge pour le masque de louP ?
Hello la taille est la taille "standard" 15/16cm mais tu peu imprimer une tranche pour verifier la taille au cas ou un guide pour les mesure est disponible dans les images
hello! i was wondering if the flexi fox keychain can be printed in resin?
hello ! i never tried because i have only pla printer sorry :/
Hi! I love your articulated masks! Please do a fox one! I neeeeeeeeeeed this
hi ! Thanks you so much i will work on that ! :D
I just baught the "Articulated Cat Mask". I am unsure which versions to print, since the remodelled versions dont seem to have a space to attach the back strips to. Maybe you also have an idea to measure my head to see if it fits...
Hello, I just added a new version with holes to pass elastic bands inside, as well as a measurement guide to help with sizing.
Hey, what size is the current model? And what is the best way to measure it so that it fits me?
Regards
Wolfmask
hey! the model is currently for a face size of 15cm (thin face) the best is to measure from one cheek bone to the other for a good result. the all-purpose size is 17cm. I will upload a photo measurement sheet tomorrow :)
Can you please help me design a game well I have a game design but make a game that's almost exactly like the one that you created
EleMEntZ
elementz1007@gmail.com
Elementz1007 Instagram
hello i didnt understand your question ^^"
Can you please provide any details on how you oriented the wolf jaw on the print bed and any support settings?
Hello! I did not use any particular setting I did a 15% filling and I printed the jaws teeth up to avoid too many supports. I hope it will help you otherwise do not hesitate to contact me on instagram I would send additional photos:)
Hii! Can i ask the width and the length of the rubber band you used in the articulated wolf mask? Thanks!
Hello! sorry for that late reply. I put 5 cm on each side but you can adjust according to the size of your head:)
do you have instructions on how to add the lights for the fire fits?
Hello I use LED strip that I stick inside and I fix the battery block with double-sided tape. An airbrush painting can amplify the desired color. If necessary I can add photos Do not hesitate to contact me on Instagram for further instructions.
Guys I'm saving for an escooter for my son. Plz download. I haven't sold any yet
Hello, I was wondering approximately how big the Hinata lion fists were?
Hello approximatively 50 cm but you Can resize it
Bonjour ! J'aimerais savoir si les poings du lion d'Hinata peuvent être imprimés plus petits sans perdre l'espace de la main. J'aimerais l'imprimer un peu plus grand que mes mains, mais je ne sais pas si le modèle est adapté ou non
Bonjour ils sont creux donc si vous les souhaitez plus petit aucun problème.
Le mieux sera d'ajuster la découpe pour "l'entrée de la main" donc à l'arrière du lion, ça n'affectera pas le design général.
N’hésitez pas si vous avez d'autres questions :)
Bonjour, je m'appelle Cody et je dirige une petite entreprise en Australie. J'adore votre tour à dés et je me demandais s'il était possible d'obtenir une licence commerciale ?
Bonjour, nous pouvons en discuter oui ! Vous pouvez me contacter par mail justine.fontaine02@gmail.com pour me donner les détails du projet.
Bonne journée
Hello, I bought the WichKing sword lord of the ring. But I can't import it into Bambu Studio. The blade is too long. Could you cut the blade and adjust it to a size of 250 mm? Best regards
Hello ! Aucun problème je vois pour ajouter un model cut dans la semaine :)
Hello désolé j'ai eu beaucoup de travail, j'ai ajouter une version cut de la lame
Thank you so so much! ❤️