Hola buenas amigo, estoy buscando el reten del cargador del Sniper l96
- 0 j’aimes
👋 Bonjour à tous ! Ce fil de discussion est public, alors restons gentils et respectueux. Pas de publicité, de spam ou de choses désagréables !
🇦🇺 Pays du membre : Australie
🌐 Langue préférée du membre : Anglais. Vous pouvez traduire en ligne via DeepL.
💡 Vous faites référence à un modèle en particulier ? Ajoutez le lien, le titre ou le numéro du modèle.
🖼️ Vous souhaitez publier des photos ? Utilisez un hébergeur gratuit comme ImgBB et collez les liens dans le message.
✍️ Astuces de rédaction : Utilisez le format Markdown pour structurer vos textes et les rendre plus lisible
Écrivez votre message :
9 commentaires
Hola buenas amigo, estoy buscando el reten del cargador del Sniper l96
- 0 j’aimes
Would you be able to print and ship this to perth, Australia
- 0 j’aimes
this is for the evo 6 fog light mount
- 0 j’aimes
Can print and post for $100. Recently did it for someone in Sydney. I don’t normally like to sell these kind of prints due to potentially having them misused and then being blamed for a subpar print.
I’ve recently altered the model a little to make it more flexible on the tabs and less supports required too.
I’ll update the model here within the next 24hrs
- 0 j’aimes
Hey Men, wanted to know if your Evo 6 fog light mount would work for an Evo 4? Currently own an E4 but missing the lights and the mounts and also the dimensions for the Tacoma fogs as I may try and CAD a mount for mine if not.
- 0 j’aimes
Hey mate, I’m 99% sure it won’t work.
Pretty sure the evo 4 and 5 use the same fog light but different mounts.
The evo 6 mount and light are different.
- 0 j’aimes
Gotcha, thanks
- 0 j’aimes
Hi, I purchased your file for evo fog light housing a while back. I have had them printed twice but on each occasion when fitting the fog lights into the housing the casing seperated/cracked. First time was printed in ABS second was Carbon fibre combined with another plastic material. Printer mentioned it can be supported better in various areas, is this possible? Thank you very much, Michael.
- 0 j’aimes
Hi Michael,
Are you printing these yourself or getting someone to do it for you?
The orientation I have pictured i found was the best way to print these files. I haven’t had any issues with separations, that’s usually a printing problem. Possible not the right heat settings where layers aren’t adhering correctly. I wouldn’t suggest using any type of infused filaments like carbon or glass, they actually tend to made prints weaker, especially when they’re meant to have a bit of flex in them.
Id suggest PC, ASA, ABS+, Nylon. I find these filaments allow good strength while having a little flex to it. Id avoid PetG as it can be brittle upon flexing.
- 0 j’aimes
Yes, I guessed as much haha. No, I don't have access to a large enough 3D printer capable of printing such. I will make contact with a few local 3D printing companies first. It will be difficult to obtain a quote without the file. From your experience & judging by the shear size of the item, should it be costly to print the object? Thank you.
- 0 j’aimes
I'm located in the Republic of Ireland. Unfortunately very far from you.
- 0 j’aimes
That would be very expensive just in postage haha.
You can’t print yourself?
- 0 j’aimes
Hi, I am interested in the Evo 6 front foglight housing. I am aware it's just the print file for sale but am curious if you would be willing to sell the complete & finished product? Is that something you might be interested in? Thank you.
- 0 j’aimes
Hi, it’s a possibility, I’m in Brisbane Australia. Where are you located?
- 0 j’aimes
hey man whats your price to ship to melbourne?? as i cant print this. do you know the measurements?