DIY items, fun items, decorative items and much more
👋 Bonjour à tous ! Ce fil de discussion est public, alors restons gentils et respectueux. Pas de publicité, de spam ou de choses désagréables !
🇨🇿 Pays du membre : Tchéquie
🌐 Langue préférée du membre : Anglais. Vous pouvez traduire en ligne via DeepL.
💡 Vous faites référence à un modèle en particulier ? Ajoutez le lien, le titre ou le numéro du modèle.
🖼️ Vous souhaitez publier des photos ? Utilisez un hébergeur gratuit comme ImgBB et collez les liens dans le message.
✍️ Astuces de rédaction : Utilisez le format Markdown pour structurer vos textes et les rendre plus lisible
Hello! I just purchased your model "Middle Finger Like A Key Holder" and the zip file is missing some of the models. I only received 5 parts (Back Cover, Finger Cover, Finger, Hand and Hook). The file is missing the other three files. The description listed the following parts:
back.stl
finger.stl
gear1.stl
gear2.stl
main body.stl
peg.stl
pin.stl
press.stl
The file names are different. So, I'm guessing that I am missing the gears, peg and pins?
Never mind. I downloaded it again and I appear to have all of the correct files now. Weird. It's like Cults3D sent me a completely different zip file the first time.
Hello, thank you very much for your purchase. I checked it, and it should all be available for download. I see all the parts here. Try checking again. Maybe you missed something somewhere. Thank you.
OK. I'm really not trying to be a pain. After downloading the file again, I have all of the parts and they seem to print fine - until I attempt to assemble it. The finger seems to be tall thick to fit inside the case. It works fine. But the back plate will not seat all the way down without pinching the moving finger?
everything should fit. it is possible that it may also vary on different 3d printers.
https://www.patreon.com/user/membership?u=121342419&view_as=patron this link to purchase the commercial license is not working for the Luxury Bed For Spongebob
Hi there! I have purshased your model and I am getting in trouble to slice it.
I have tried to use Cura and Orca and Both of them are spending to much time to do it and It is about 4 days to print, that is right? Do you have any extra tips or advice to give me?
Hello, I appreciate your interest. "boletus" is one of the most challenging prints even for me. I ended up printing so that the support was everywhere. I changed the settings so that the supports are in a square, so that they are as stable as possible. it is more difficult to remove the supports, but it can be done. This is not necessary on better printers, it works better. If you have a cheaper printer, try better supports.
Otherwise, change the settings, such as the fill, save material, there is no need to have a large fill. The print took me much less than you write. I think about 1 day. On better printers, this is not a problem.
Hi INVENTIONSLAB,
I hope you're doing well. We recently purchased your design "Mushroom as a Table Lamp" (Design Number: 1836030), and we're facing some issues during printing. The model named "Boletus" seems to have a very low density in the upper layer, which is affecting the print quality.
If you have any specific settings or adjustments that would help with this model, could you please share them? Also, I have some images and a video of the issue—if you could share your email, I can send them over for your reference.
Looking forward to your assistance.
Thank you!
Hello, I appreciate your interest. "boletus" is one of the most challenging prints even for me. I ended up printing so that the support was everywhere. I changed the settings so that the supports are in a square, so that they are as stable as possible. it is more difficult to remove the supports, but it can be done. This is not necessary on better printers, it works better. If you have a cheaper printer, try better supports.
Thank you for your response. Could you also tell me which type of support do you use , like Tree support or general support. Also if you could share overall settings of your support it will be very helpful.
Hi. I bought your design recently ( MUSHROOM AS A TABLE LAMP! ). I have a question to you about this model. Can you contact me on my email : marc3dp.contact@gmail.com
do you have a way to purchase a commercial license for the mushroom lamp?
Hello. Thank you for your interest in 3d models. Yes, Here : https://www.patreon.com/user/membership?u=121342419&view_as=patron
I RECOMMEND LOOKING ALSO AT THIS CUTE FOX MODEL: https://cults3d.com/en/3d-model/home/luxury-fox-lighting-wall-decor-not-just-for-babies
Hello, a pleasure to greet you. Yesterday I bought the bear design with roses because it looks amazing, but when I open the STL in Cura I get some errors in certain areas of the piece. I tried to fix them with 3D Builder and Mesh Mixer but I didn't succeed. I would like your help because it is really a great design.
Screenshot: https://ibb.co/Cm16J4C
Hello, I'm sorry there's a problem. it is a very complicated model. a lot of bridges which unfortunately cannot be removed if I want to achieve this shape. I used a Prusa slicer for printing. support turn on everywhere. try this slicer. Or I think that these mistakes could be skipped. they are mostly in places where they shouldn't be seen. so try to skip errors and use supports everywhere, or if slicer won't let you go to the next step without a fix, try prusa slicer, it will work there.
Let me know if it works.
Yes it worked, thanks. Sorry for the late reply.
Great :-) Thanks for the message :-)
Hello,
Any chance you may be considering making the NRE Maximus TT HEMI Engine in a full complete Motor file? I have been wanting to find it available in a 3d-file, but up until now have had no luck. You have the exact front section of this engine in perfect replica and would love it if you are able to complete it front to back in a full file. Is that something that may be possible?
Kind Regards🍻
Hello, I only have this one. https://cults3d.com/en/3d-model/home/2-200-hp-twin-maxi-turbos-one-of-the-most-powerful-engines-in-the-world-ba it may not be 100% accurate. I don't have another one planned yet. Do you want it just as a design piece for your desk? or are you looking for something that is 100% accurate?
I did see that one you made, I am looking for one similar in detail(doesn't necessarily need to be 100% accurate), but it would be a complete motor from front to back which would be used for 1:18 scale model Customizing. The detail you put into the file you made is really good and I would love to have a full motor to use in a few of my Build Projects.