GSM | GearShiftMFG
Modernizing systems with purpose-built 3D-printed parts. Design. Create. Shift the future. Designed and manufactured in the USA
👋 Bonjour à tous ! Ce fil de discussion est public, alors restons gentils et respectueux. Pas de publicité, de spam ou de choses désagréables !
🇺🇸 Pays du membre : États-Unis
🌐 Langue préférée du membre : Anglais. Vous pouvez traduire en ligne via DeepL.
💡 Vous faites référence à un modèle en particulier ? Ajoutez le lien, le titre ou le numéro du modèle.
🖼️ Vous souhaitez publier des photos ? Utilisez un hébergeur gratuit comme ImgBB et collez les liens dans le message.
✍️ Astuces de rédaction : Utilisez le format Markdown pour structurer vos textes et les rendre plus lisible
Hello, in design #2888764 what is the size(ID and OD) of the 90deg pipe that comes out of the intake manifold ?
Hi Nervozen, My apologies for the delayed response. It is 16mm diameter to a 15mm diameter (clamp portion) shaft OD. The ID is 11 mm (Catch Can Out Hose) to 4mm (intake). Retaining the Catch Can same 5/8-inch fitting so most 5/8 ID hose should suffice (recommend reinforced ones)
Hi, in design #2888764 what do you connect the hose coming out of the catch can to?
Hi gq2jvnv6v, the hose coming out of the catch can either reconnect to the factory pcv, to a check valve that connects to the intake, or (NA Applications) should connect to the intake boot.
Air Filter
@Nervozen. I would refrain from putting it before the MAF (air filter) to minimize any potential contamination on the MAF component itself which may cause failure.
BMW M52/S52 CCV Delete to Universal Catch Can
can you order all the items i need to just make it one simple order from you ?
Hi Jonmurguia,
Thank you for your inquiry! I will have to look at the most current Items and provide you with a quote. Please give me a few days to figure out the estimate for printing the parts. Parts will be printed using ASA Material for heat resistance. Just have a couple questions before proceeding. What would be the shipping zip code? What delete method would you like to proceed with option 1: Vented to atmosphere outlet (simple 1 hose setup, easy installation) or Option 2: routed back to intake manifold (This might cause codes if your not tuned and cost more)?
Printed the reloadable double can holder (design 3691194); on an any cubic Kobra 2 Pro using PLA for the Top and Bottom 12oz holders and the gripped centre piece. What changes to the model / settings would you recommend for the Top and Bottom Threaded Inserts for TPU? I printed them using the same settings as the PLA, and noticed some shrinkage, making it incredibly stiff to load / reload.
Hi @mikeamacphee ,
The design was modified for clearances on a bambu labs P1s. Do you have any measurements tools to see exactly how much shrinkage you’re getting? I would also reference any technical data sheets for the material to see if there’s any data on dimensional stability in xyz.