32 commentaires

Hi! That is an old project, one of my first cosplay props ever. The trigger is not missing, you have to make your own with foam (or any flexible material), as you can see in the pictures. The assembly instructions say "Foam trigger", it means you need to make it out of foam. If you need a template for it, you can just download the last picture before the model preview.

Hi! No, I'm currently not designing multicolor versions of my designs because since I don't have an AMS, I'm not able to test them. However, you can always print it in red or blue and paint it using acrylic colours or markers and spray it with a clear coat once the colours dried.

Hi! Yes, I do, but the commissions are closed at the moment. You can check my Instagram page to know when I reopen for commissions.

Hi! The flexible Doctor Octopus tentacles are designed to have some bendy wire inside, otherwise they can't bend and hold the pose.

I'm afraid you can't make them too small, otherwise you might struggle to find a bendy wire that's thin and strong enough to hold the poses.

Also, since those tentacles must be printed in TPU otherwise they're not flexible, you can't print them too small without the risk of running in some tolerance and print issues.

Ciao! Puoi scrivermi tranquillamente su Discord. Trovi il link nella biografia del mio profilo Cults.

Hi! I'm not making statues anymore. I'm focusing on articulated figures. Also, I had to close commissions indefinitely for now.

That is fine. Thanks for reply though

Hi! You can just click on the links on my profile. I'm on Instagram and Discord.

Hi! That was an old prototype of hand joint. It was designed to not have an actual peg because the peg was meant to be made by hand using bendy wire or twist ties as written in the description. However, I made a new version of those hands, but it's not free.

Hi! What kind of problems are you having when printing your figures?

The gears on my flash adventurer 3 wont feed filaments and my crs 10 will only build the bottom layers of my models. Builds about 90 percent of the model.

It sounds like your printers are not working properly for some reason

I could give you a free coupon. It would let you download all of my figures for free.

Look, I would appreciate that, thanks, but I can barely keep up with my own stuff at the moment (I even had to close commissions indefinitely). Are you sure you can't do anything to fix your printers? Articulated action figures must be tested before release. Because joint tolerance is a rather delicate thing.

I understand. It definitely works, I've been doing this for a while now. I just want to show people what it looks like. Either way, I was mainly selling the model. I've printed pieces before my printer stopped working. I appreciate your time. Good luck, I will send people your way.

I think it was the Dr. Doom body.

Hi. If the joints don't fit at all, it could be a matter of tolerance amd dimensional accuracy of your machine. Especially the ball joints should fit without problem and mine were actually a bit loose.

Try printing some tolerance test. The joints are designed with a 0.3 mm tolerance.

Also, you can find some common problems and some options to solve them in the description.

Each pair of hands comes in its own STL file.

It also happened to me once, but I don't know what to do in these cases, especially if they bought the design using an account with a different name.

Here’s what I did, I took my fine print and sent it to them on their account they are selling the prints from. They responded and said they would take it down, but I said they could sell them if they say where they got the file from.
We’ll see how that goes…
Thanks for the reply, best of luck!

Thank you for contacting me! I'll check the archive again and eventually send you the missing parts as soon as possible!

Try downloading the archive again. Everything should be there. Try downloading the archive again. Everything should be there. You should also have received an email regarding the update.

Thank you for updating the downloads!

Hey I am stil missing the rest of the models. Particularly the head.

I added the head. I still don't know why some parts are missing, since I always check everything before uploading. If you notice something else, don't hesitate to contact me!

I don't know. It depends on a lot of things.

No problem. The refund request has been sent.

The original download link has been removed by the author (I think) and I couldn't find it anywhere else. There are some peoples selling it without permission, but since it has always been free, I suggest you to not buy it. I'll add a link to the original models as soon as i find it.

It seems the original author is selling it here on cults since lots of people started re-posting his work claiming as theirs. You can find it by searching for "toybiz".

Muchas Gracias

I'll add them as soon as possible.

There are some of my hands that may work with the pose you're referring to, but for the middle finger ones I don't know. We'll see.

Unfortunately I never owned a Doc Ock figure from that line so I don't know. It should have a different peg system. The only way to attach them to those figures is modifying the pegs.

Ok which ones do you own?

I'm still waiting for a good and not ridiculously overpriced one. I made those arms because I was planning to make my own Doc Ock figure.

advice keep an eye out for bundles near you

First of all, thank you for choosing my models, I hope you like them.

For the pins, you can just cut a piece of raw filament and if it's not tight enough try using a small piece of paper tape.

As for printing figures and functional parts in general, let me give you some tips:

• Check your machines' dimensional accuracy and tolerance by printing some tolerance test models. There are plenty of them available for free. Adjust your printer settings until you pass them;

• Most of the parts I upload are already in the right orientation, so don't change it until you're sure of what you're doing or you could end up printing parts that break easily / don't fit / have too much supports / etc...;

• Since you're new to 3D printing never leave your printer unsupervised for too long or you may notice any "bad surprise" when it's too late (e.g. the part you're printing lost adhesion and broke away).

I can't wait to see your makes! Feel free to contact me for any problem. Happy printing!

Thanks, your models look awesome and I will let you know how it goes :-)

I don't own any Black Series figures but I have some Marvel Legends. However no, they don't fit as Agilis' ankle pegs are different. You must modify them in order to make them fit.

Yes. Metabee is not my only project.😅

oh i ment more medabots other than metabee

No, for now Metabee is the only medarot I've made.

I don't know. It depends on a lot of things. Anyway their limbs are already interchangeable, because they use ball joints so you can just pop off the parts and assemble them as you wish.