Láminas con textura - 10 diferentes - SBuilder - for scratchbuilders

For ALL our models search for '3Drailprint'

Do you ever need a textured sheet for cladding or building your models? Now you can print your own as you need them! Click on pictures to see full screen

First picture shows the 10 full sheets and all others show the various textures as samples - all included in your purchase.

4mm scale (1/76) suitable for 00 and H0 model railways but scaleable - see below.

Full sheets are all 180mm x 180mm to fit most print beds as shown in first picture.

Samples are 40mm x 60mm and can be printed individually or several at once to suit your needs. You can print these first to see the effects on your printer and to practice painting to best effect.

Full sheets are available in two versions - 'thick' or 'thin'. Thick sheets are about 1.8mm thick and do not bend for use as the structure of buildings etc., whilst the 'thin' versions are about 0.7mm thick and are flexible, can be cut with a strong pair of scissors and are designed to clad a structure.

All textures are optimised to look their best printed on a standard FDM printer.

Scalable with suitably sized nozzle.

The 10 textures included with your purshase are:-

SBuilder 001 = BRICK
SBuilder 002 = STONE
SBuilder 003 = CORRUGATED
SBuilder 004 = ROOF TILES Includes a ridge tile file/model
SBuilder 005 = COBBLESTONES
SBuilder 006 = CLADDING
SBuilder 007 = PAVING STONES
SBuilder 008 = WEATHERBOARDING
SBuilder 009 = BREEZE BLOCKS
SBuilder 010 = SLATE

All print flat without supports on an FDM printer with 0.4mm nozzle. Textures print OK with a 0.2mm layer height with the exception of the roof tiles and weatherboarding which are best printed with a 0.1mm layer height.

If scaling down then a 0.2mm nozzle and 0.1mm layer height will be required.

If scaling up you may need to cut them down in size in your slicing software before scaling them up so they fit on your printbed.

Allow to cool completely before removing from build plate or prints will not stay flat.