Saint-Chammond Scale model 1/35, 1/48, 1/72

Update 06/01/2023

Fixed the Parts to now be all included to download

                                 Update 12/10/2021

Now the 4 part version (top hull, underside, left and right tracks) has smaller rivets more to scale, ill work on adding that to all versions.

There is going to be a later update with the late version of the Saint Chammond with the slopped roof, so ill make sure to update you as soon as that is ready.

                               Update 3/9/2021
 I added a new version split in more parts for easier printing

The Saint-Chamond tank was the second French tank to enter service during the First World War, with 400 manufactured from April 1917 to July 1918. Although not a tank by the present-day definition, it is generally accepted and described as such in accounts of early tank development.

This model was created from scatch in Blender3D with 3d printing in mind.

The model consist of 20 parts for easy assembly and a single piece model for bigger resin printers

Because of the small parts that are included in this model, its not recommended to print the whole model in a FDM printer, but parts such as the main hull can easily be printed on them.

Ill make sure to upload a more FDM printer friendly soon.

When fully assembled, the model measurements are:

1:35 or 100% scale: 256mm x 112mm x 73mm

1:48 or 73% scale: 187mm x 82mm x 53mm

1:72 or 48.6% scale: 124mm x 54mm x 35mm

1:100 or 35% scale: 90mm x 39mm x 25mm

Printed in PLA

5-10% infill

1.2mm layer height

50mm/s speed

Support active: 5% density 60% support interface desity

Build Plate Adhesion: Brim