Módulo de arranque de motor Vision Jet para simulador de vuelo

✈️ Vision Jet Engine Start Panel – MSFS Compatible

This custom Vision Jet Engine Start/Stop panel is designed for home cockpit builders flying the Cirrus Vision Jet (G2/G2+) in Microsoft Flight Simulator. It replicates the real aircraft’s start system with OFF / RUN positions and an ENGINE START/STOP switch, adding realistic interaction and immersion to your build.

🔧 Features

• Accurate Vision Jet–style engine start layout
• Functional OFF / RUN positions with extruded markings and push button ON / OFF
• Fully compatible with **MSFS, using Mobiflight
• Printed in five modular parts for multi-color printing or easy painting, if desired
• Recessed switch guard for a clean, professional finish

🧩 Compatibility

Ideal for Vision Jet cockpit builders using:

• FlightFX Vision Jet (MSFS 2020 / 2024)
• Mobiflight
• SPAD.neXt
• [Arduino Leonardo / Mega 2560 boards]

🧠 Context of Use

This panel pairs perfectly with other Vision Jet modules such as the GTC touchscreen panel, lighting panel, and autopilot module. It can be mounted as a standalone unit or integrated into a larger home cockpit assembly.

📦 Included Files

• STL files for all five printable components
• Clearly labeled parts for straightforward printing and assembly
• Designed for specific switches mentioned above

⚠️ Notes

• This model is for personal simulator use only
• Not affiliated with or endorsed by Cirrus Aircraft or Microsoft
• Electronics, switches, and mounting hardware not included. Files only.

🔍 Keywords

Vision Jet Engine Start Panel
MSFS 2020 Vision Jet
Cirrus Start Switch
Mobiflight Panel
SPAD.neXt
Flight Simulator Cockpit
3D Printed Cockpit Panel
Home Cockpit Module
Vision Jet G2
FlightFX Vision Jet
Arduino Flight Sim

🖨️ Manufacturing & Print Instructions

• Print Orientation: Faceplate side up for best surface finish and text clarity
• Recommended Layer Height: 0.16 – 0.20 mm
• Wall Count: 3 – 4 perimeters for strength and crisp edge detail
• Infill: 15 – 20 % using either Grid or Gyroid pattern
• Material: PLA, or PETG (PLA recommended for easiest printing)
• Supports: Not required for most printers; enable supports only for the switch guard overhang if needed

🧱 Hardware & Components

• Push Button: BF3-4055 momentary push button switch (fits under ENGINE START/STOP guard)

• Rotary Switch: 2-position rotary switch from Digi-Key — Part Number CKN10695-ND

  • Depending on printer tolerances, the rotary switch fit may be snug but still manageable during assembly

🔩 Fasteners & Mounting

• Designed for M3 threaded inserts
• Use M3 × 10 mm or M3 × 12 mm counterbore machine screws
• Switch Mounting: After confirming proper fitment, secure both switches in place using CA glue
• Button, Knob, and Cover: Once final positioning is verified, these components should also be CA glued into place for a permanent, clean assembly
• Install threaded inserts using a soldering iron or heat-set tool

🧰 Assembly Notes

• Test-fit all switches before gluing or inserting hardware
• Apply CA glue sparingly to avoid seepage into moving parts
• Lightly sand engraved text and edges if desired before painting or filling
• Instructions for setting up Mobiflight are not included in the files