Beretta APX compact/Full size Conversion frame PDW

Conversion frame for the Beretta APX compact and full size. Slip that FCU and slide on and enjoy! This is a B&T conversion type grip frame with an integrated pivot stock and integrated locking button. Please know your Country and States firearm rules before downloading. I take no responsibility for your actions and always practice safe firearm use. This is not a firearm!! U still need your licenced FCU to install into the frame.

I used polymaker PET-GF15 and Siraya Tech PPA-CF. U can use any filament that is strong enough and is dimensionally stable.

Print main frame at 45 degree nose down...upside down like in the pic files or flat rails down.
Print the folding stock flat on the bed like in the pic file.
Print the stock release button flat on the flat side.

U will need:
1x M4 35mm bolt
1x M4 30mm bolt
1x M4 40mm bolt
1x M4 Nut
2x M3 bolts
2x M3 Nuts
2x Ender type Push springs.
1x magazine release button spring found inside the original frame.

The one ender spring will need to be cut in half to fit in the slot for the stock release button. If the ender spring is to hard to press then use any other spring of the same size. Insert the 2x M3 bolts and nuts to hold the stock release button in place.