Ir al contenido
Publicidad

RED DWARF STARBUG fiel al modelo del programa

Publicidad
Hacer una oferta
Compartir
Añadir a
Make
?
Calidad de creación: 5/5 (2 votos)
Evaluación de los miembros: imprimibilidad, utilidad, detalles, etc.
Licencia
Usos
Formato de diseño 3D
12 archivos (STL y ZIP) Cerrar
  • COCKPIT.zip
    • DASH TO MOUNT STL.stl
    • STARBUG COCKPIT BACK PANALS P1.stl
    • STARBUG COCKPIT BACK PANALS P3 NOT ALERT.stl
    • STARBUG COCKPIT BACK PANALS P4 DOOR.stl
    • STARBUG COCKPIT BASE P1.stl
    • STARBUG COCKPIT BASE P2.stl
    • STARBUG COCKPIT CENTER CONSOLE.stl
    • STARBUG COCKPIT DASH PANAL P1.stl
    • STARBUG COCKPIT SEATS X4.stl
    • STARBUG COCKPIT SIDE COMPUTERS.stl
    • STARBUG COCKPIT SIDE PANALS P1.stl
    • STARBUG COCKPIT SIDE WORKING ON SEATS.3mf
    • STARBUG COCKPIT STEERING WHEEL P1.stl
    • STARBUG COCKPIT STEERING WHEEL P2.stl
    • STARBUG FULL COCKPIT .stl
  • ENGINE.zip
    • BOTTOM THRUSTERS.stl
    • ENGINE 3MF ALL APART.3mf
    • ENGINE ALL.stl
    • ENGINE AND THRUSTERS READY TO PRINT/ALL THRUSTERS TO PRINT.stl
    • ENGINE AND THRUSTERS READY TO PRINT/BOTTOM THRUSTERS.stl
    • ENGINE AND THRUSTERS READY TO PRINT/ENGINE ALL 3MF.3mf
    • ENGINE AND THRUSTERS READY TO PRINT/ENGINE ALL STL.stl
    • ENGINE AND THRUSTERS READY TO PRINT/ENGINE main section .stl
    • ENGINE AND THRUSTERS READY TO PRINT/GREEBLES 1 STL.stl
    • ENGINE AND THRUSTERS READY TO PRINT/GREEBLES 2 STL.stl
    • ENGINE AND THRUSTERS READY TO PRINT/MAIN THRUSTERS P1.stl
    • ENGINE AND THRUSTERS READY TO PRINT/MAIN THRUSTERS P2 clear parts.stl
    • ENGINE AND THRUSTERS READY TO PRINT/RESIN PRINT ALL GREEBLES STL.stl
    • MAIN THRUSTERS.stl
  • FRONT LIGHTS .stl
  • GREEBLYS.zip
    • BACK GREEBLES.stl
    • BACK RAYDAR .stl
    • FRONT GREEBLES.stl
    • FRONT NOSE RADAR NOSE.stl
    • GREEBLIES TO PRINT/BACK GREEBLES AND FRONT TO PRINT.stl
    • GREEBLIES TO PRINT/BACK GREEBLES.stl
    • GREEBLIES TO PRINT/FRONT GREBBLES.stl
    • GREEBLIES TO PRINT/MID SECTION GREEBLES .stl
    • MID SECTION GREEBLES PART 2.stl
    • MID SECTION GREEBLES.stl
    • NOSE BOTTON.stl
    • TOP FINS.stl
    • TOP RAYDAR WITH LADDER.stl
    • UNDERSIDE DETAILS.stl
  • LEGS.zip
    • 1 back landing gear p1.stl
    • 1 back landing gear p2.stl
    • 1 back landing gear p3.stl
    • 1 back landing gear p4.stl
    • 1 front landing gear p1.stl
    • 1 front landing gear p2.stl
    • 1 front landing gear p3.stl
    • 1 front landing gear p4.stl
    • LEGS TO RESIN PRINT/BACK FEET TO RESIN PRINT.stl
    • LEGS TO RESIN PRINT/BACK LANDING GEAR MARSHMALLOWS.stl
    • LEGS TO RESIN PRINT/FRONT FEET AND ARMS TO RESIN PRINT.stl
    • LEGS TO RESIN PRINT/FRONT LANDING GEAR MARSHMALLOWS.stl
  • MAIN BODY.zip
    • NEW BODY BACK P4.stl
    • NEW BODY CONECTING RINGS P5 with direction.stl
    • NEW BODY CONECTING RINGS P5.stl
    • NEW BODY HEAD P1.stl
    • NEW BODY MAIN BACK SECTION P3.stl
    • NEW BODY MID SECTION P2.stl
  • NEW BACK RADAR NOSE.stl
  • NEW BODY nose.stl
  • WINDSCREEN OR TEMPLATE.zip
    • FRONT WINDSCREEN AND SIDES.stl
  • missing top greeble.stl
  • tony1983 BACK SECTION p4.stl
  • tony1983 MAIN BACK SECTION P3 and p4.stl

Más sobre los formatos
Última actualización
Fecha de publicación
Número de diseño 1686634
OutSideWorkshop

OutSideWorkshop

Cuenta certificada
¿Tienes algún defecto en este diseño? Advertir de una problema.

7 comentarios

Añadir un comentario

👉 Inicia sesión para escribir un mensaje

7 comentarios

rodmcdonough
rodmcdonough

Hi there, a question not just to the person that created the file. I really want to download and build this Starbug. Being new to 3D printing, what kind of printer would I need? Some of the parts look quite large.

Thank you
Rod
wayneminney
wayneminney

Just purchased and downloaded, awesome stuff! Any chance you could add a folder that contains all the exploded views of the parts and how they assemble? If not no worries, I'll save the images from the browser. Again, great work!
wayneminney
wayneminney

Hi, just checking these files are still available? They're by far the most accurate I've found so far, really excellent work!

Best Regards
Wayne

OutSideWorkshop
OutSideWorkshop

Yarp always available:-)

  • 1 me gusta
wayneminney
wayneminney

Great stuff, looking forward to building it!

OutSideWorkshop
OutSideWorkshop

There are alot of photos and screen shots uploaded should cover all , but if you need anything message me and I'll see what else I have on file , hope you enjoy 😉

fizber335
fizber335

Hi. Could you advise how to connect the main body (p3) with main body (p4) - there are holes for what look like pegs, but I'm struggling to find anything that matches? Also just want to say that this a fantastic and fun project! Thankyou

OutSideWorkshop
OutSideWorkshop

Glade your injoying:-) check the photos , scroll till the end few they show the model broken down, there are rings connecting main body sections, main ring has door opening on the bottom section , hope this helps , cheers

tony1983
tony1983

The radar that sticks out the rear end also doesn’t seem to fit and is too loose. It also doesn’t look like the one in the pieces. You’re seems to have a lip/plug. The one I printed doesn’t have that and just falls through the hole where it’s supposed to go.

OutSideWorkshop
OutSideWorkshop

I'll have a look , sounds like the one you printed of the back radar is a older version, the newer version should be there , I'll look and delete older file

OutSideWorkshop
OutSideWorkshop

Sorry about that , not shore how I missed that , cheers rob

motobarsteward
motobarsteward

Build going well now. It looks like a brand new star bug. Just need to age it by 3 million years or so! I think that there are a couple of greebles missing from the STL files. do you have the stl files for the two greebles that sit on sop of the mid section by the circumference ring just above the "1"?

OutSideWorkshop
OutSideWorkshop

I know the part , I'll post separate part when I get home from work , good to hear it's going well , would love to see it :-)

OutSideWorkshop
OutSideWorkshop

Posted missing part , sorry about that's:-)
motobarsteward
motobarsteward

I'm struggling to slice the Main Back section. I'm using the built in slicer that comes with my Bambu Carbon X1. It gets stuck on detecting overhangs.

OutSideWorkshop
OutSideWorkshop

Is that the main engine , it's a complex part , how would you want me to help ? Would you like me to break it down some more ?

OutSideWorkshop
OutSideWorkshop

POSTED NEW OPTION FOR YOU TO TRY

motobarsteward
motobarsteward

Sorry, I was trying to print with automatic variable layer height. I just printed at 0.2mm and it did it eventually. It's coming along nicely. The main body took 34 hours to print! working my way through the rest before I start painting.
What colour/make of green did you use?

motobarsteward
motobarsteward

How did you make the cockpit glass? I can see the printed one in your photos but it's opaque. The model ends up with a beautifully clear window.

OutSideWorkshop
OutSideWorkshop

seems im not getting notifications lust saw you post . hope you sorted . ps i printed the windscreen and used it as a template and cut it out of a clear plastic / plastic bottle

  • 1 me gusta
motobarsteward
motobarsteward

Yes, that's what I did on the end as well. A 2l pepsi bottle up around the top done works well.

OutSideWorkshop
OutSideWorkshop

Excellent, hay did you have any trouble with the back end I have a guy saying it printed 5mm to small , iv checked my files and seems all good here , plus printing it so I'm alittle stumped, cheers rob

Pasty_scoffer
Pasty_scoffer

Sorry for jumping on your thread. Just wanted to say I love how you're replying and constantly updating. I've been watching this for a while and decided I think I'll make one, shall purchase soon! Do you think you'd ever fancy designing Red Dwarf mining ship? I see one on Gambody but sooner give you the buy if you decide on it!

OutSideWorkshop
OutSideWorkshop

Cheers :-) never thought of Red Dwarf it self, my list is getting longer:-) , I'm working on my AT-ST at the moment , wanting it printed and painted be for I re post , always busy

motobarsteward
motobarsteward

You asked if I had any trouble with my back end being too small! No, it was the correct size! Is it possible something changed in a layer release of files? There's been a couple since I downloaded mine.

OutSideWorkshop
OutSideWorkshop

Cool cheers :-)

Página traducida por traducción automática. Ver la versión original.

¿Te gustaría apoyar Cults?

¿Te gustan Cults y quieres ayudarnos a continuar la aventura de forma independiente? Tenga en cuenta que somos un equipo pequeño de 4 personas, por lo que es muy sencillo apoyarnos para mantener la actividad y crear futuros desarrollos. Aquí hay 3 soluciones accesibles para todos:

  • PUBLICIDAD: Deshabilite su bloqueador de anuncios.
  • DONACIÓN: Hacer una donación a través de Ko-Fi Hacer una donación
  • BOCA A BOCA: Invita a tus amigos a venir, descubre la plataforma y los magníficos archivos 3D compartidos por la comunidad!

Compartir y descargar en Cults3D garantiza que los diseños permanezcan en manos de la comunidad de creadores. Y no en las de los gigantes de la impresión 3D o del software que poseen las plataformas competidoras y que explotan los diseños para sus propios intereses comerciales.

Cults3D es un sitio independiente y autofinanciado que no rinde cuentas a ningún inversor o marca. Casi todos los ingresos del sitio se devuelven a los creadores de la plataforma*. El contenido publicado en el sitio sirve *únicamente a los intereses de sus autores** y no a los de las marcas de impresoras 3D que también desean controlar el mercado del modelismo 3D.