72 条评论

Hello, thank you for purchasing our model! We apologize for the inconvenience. Would you be so kind as to send your proof of purchase to our email so we can make the desired modification to our model?, We will be sending you the corrected version so you can color it.

We'd be happy to assist you!

robulltec@gmail.com

de filamento

Hola, gracias por tu interés con nuestro diseño!

Este modelo podría ocupar un aproximado de 300 a 400 gramos, dependiendo los parámetros que utilices para la fabricación

Hello! Thank you for your interest in purchasing our work. Don't worry—we would be happy to add a split version so that you can purchase it in that format. We will let you know shortly once it is available for purchase, allowing you to acquire that version at no additional cost.

Thank you very much! That makes me very happy.

It's all set! You can now purchase our design and decide whether to print it as a single complete piece or in the version divided into four parts.

We are always at your service

Hello, thank you for your interest. Where we explained printing it three times, it's the accessory that needs to be placed at different points when creating the mask. That's why it needs to be printed three times.

Buenas tardes, gracias por comprar nuestro diseño!

Normalemnte los laminadores suelen dar información del filamento utilizado segun las configuraciones que se le asigna para fabricar. En el caso de Cura le muestra en la esquina inferior derecha.

Espero haberte ayudade, cualquier consulta estoy a la orden

Hola,gracias por contactarnos.

Puedes ver nuestro catálogo en nuestra tienda de cults, tenemos una versión disponible

Hello, VARIS746, do you have any questions or is there anything I can help you with?

Hello Sharpbos, we are glad that you liked our design, we are always at your service.

Hola SRHUARGO, podrías enviarnos un correo con imágenes o referencias indicando lo que deseas por favor, para determinar el precio del diseño y de estar de acuerdo, proceder con ello.

robulltec@gmail.com

Hola Sistemas Unitec, lamentamos que no hayas podido fabricar nuestro modelo.

Hemos subido el archivo de la figura con las configuraciones que utilizamos, trata de no modificar para que salga como en la fotografìa, de no resultar, prueba revisar la calibraciòn de tu impresora y el filamento que utilizas. Muchas veces influye el clima, nivelaciòn de cama, excentricas, extrusor, teflon, filamento o incluso el motor que empuja el filamento.

Revisa si puedes descargarlo sin costo alguno, por cualquier consulta, seguirè al pendiente, espero haberte ayudado

Gracias por comprar nuestro diseño Sistemasunitec.

No, el pelo del Guy no lleva roportes.

Quedo a la orden por cualquier consulta

Thank you for writing to us Audrey Stattler!, we only sell the digital design so that you can manufacture it, if you have any other questions, I am at your service.

Thank you for purchasing our design PalomboJacopo. Of course, only if you would be so kind as to send proof of purchase and the date on which you made it to verify and we will gladly send it by email.

our email is: robulltec@gmail.com

How can I get proof of purchase?

You can go to the download section and check if it lets you download it again. If not, check in your email that you have received the invoice for the purchase you made of the model, when you find it, send us the receipt to corroborate

Hello Tedmurphy, the price is: 4,50 €

Hello Marcosribeiro,

We're sorry there was a problem with your download file. Could you tell us the design you purchased so we can review and repair it immediately

https://cults3d.com/:1402645
foi essa aqui

eu preciso o mais rápido possível por favor

We do not understand what the problem was, since the download files are correctly on the platform.

We have reviewed the digital model and it is uploaded correctly. Could you tell me what problems you had to fix it please?

Hello, following up on your situation and not receiving a specific response to the problem, we ask that you contact Cults directly so that they can evaluate the situation more thoroughly.

Even so, we remain at your disposal for any questions.

Hello Chico! Thanks for writing to us

It does not come with supports, it is only the design of the mask.

Thank you for purchasing our design Ryan. Of course, only if you would be so kind as to send proof of purchase and the date on which you made it to verify and we will gladly send it by email.

our email is: robulltec@gmail.com

Hello Valodaminsk

At the moment we do not offer discounts on our models, we greatly appreciate your understanding and we hope you like our designs.

Any questions, we are at your service.

Hello Pamela a Rood!

That is correct, the hamster wheel is in two parts. However, it will be our pleasure to upload a 4-part version. Stay tuned when we upload the modified model

You can now purchase the model divided into 4 parts, we hope we have helped you

Awesome thanks!

Your welcome it's a pleasure

Hello Chemicalitjay, thanks for commenting

We do not sell the head we use to hold the masks, only the designs shown.

Thanks for your understanding

Hello Bestrobertsmith

The model size is:

105mm wide
126mm long
180mm high

I hope I've helped

Thanks

Hello Frederic, thank you for purchasing our design! Of course, no problem, we would be very grateful if you could give us credit for the designs we make to help us grow and support our work.

Hello, thank you for purchasing our design!

You could look at some online stores or stores that are dedicated to sewing supplies.

Hello Logmar

We are glad you like our designs. At the moment we do not have a patreon but very soon we will have one, if possible, we would be notifying you by this means.

Hello Logmar.

We have already created our patreon where we will also be uploading our designs, thanks for the suggestions

https://patreon.com/Robulltec?utm_medium=unknown&utm_source=join_link&utm_campaign=creatorshare_creator&utm_content=copyLink

Hello, thank you for purchasing our design Ryan!

The file is 18 cm high. Actual size measures approximately: 55cm high.

You could scale the model to the desired size. You just have to modify the height and the rest will increase proportionally.

If the trophy is too large to print, you can split the model into two parts.

If you want us to upload the design in two parts, just tell us and we will do it at no cost.

I remain attentive to your requests and if you have any other questions you can contact us again, it will be a pleasure to assist you!

would you be willing to do that? make the trophy the correct size and cut it for me? then send me those files? id greatly apricate it!