Coily (Q*bert) - 3D打印2件套：平底 + 有机跳跃姿势 | 复古街机透视图

Bring home the classic arcade menace with this Coily (Q*bert) 3D Model 2‑Pack. You get two versions:

Flat Base Coily – stable, desk‑friendly display with minimal supports.

Organic “Jump” Coily – a dynamic, floating pose that looks great on a clear acrylic stand/rod for a mid‑air bounce effect in dioramas.

Both meshes are manifold/watertight, oriented in millimeters, and scale cleanly—from mini desk trinkets to large shelf displays.

What’s included

Coily_Qbert_FlatBase_v1.obj – posed with integrated base, tuned for easy FDM prints.

Coily_Qbert_OrganicPose_v1.obj – dynamic spiral pose without base; display with a clear stand/rod for a “jumping” look.

Why makers like it

Two poses, one download – pick stable base or dramatic mid‑air display.

FDM & resin friendly – rounded forms, continuous surfaces, and generous wall thicknesses.

Painter‑ready – smooth stylized sculpt suited for simple base‑coat + wash or full detail work.

Scale to taste – defaults print nicely around 100–130 mm tall; scale up/down freely.

💡 Diorama idea: use a 2–4 mm clear acrylic rod under the organic version to “float” Coily above a cube‑stack or step base—perfect next to your Q*bert model.

FDM (PLA/ABS/PETG)

Layer height: 0.16–0.20 mm (0.4 mm nozzle)

Perimeters: 3 | Top/Bottom: 4–6 | Infill: 12–20%

Supports:

Flat Base: usually only under the chin/fangs and small overhangs.

Organic Pose: use tree/organic supports under the head, inside coil spans, and under fangs.

Adhesion: 3–5 mm brim recommended for the Organic pose.

Orientation: print upright as provided; rotate a few degrees if your slicer gives cleaner support paths.

Resin

Layer: 0.05–0.08 mm

Medium/heavy supports under chin, fangs, and coil undersides; add drain holes as your workflow requires.

FILE DETAILS

Format: OBJ (mm)

Models: 2 (Flat Base + Organic “Jump”)

Scaling: safe to scale up/down; no fixed size requirement

Intended use: desk decor, retro dioramas, arcade memorabilia