AMIRI 徽标 3D 打印包 - 文字标志和蜘蛛字母墙艺术 (OBJ)

Bring high‑fashion vibes into your room, studio or store with this AMIRI logo pack in HD 3D.

This download includes both the classic AMIRI text logo and the iconic spider/monogram emblem in multiple versions:

Included OBJ files
• AMIRI_Text_Logo_Word_AMIRI_3D_Print.obj – full AMIRI word mark, ready to print as a one‑piece sign
• AMIRI_Text_Logo_Letter_A_3D_Print.obj, M.obj, I.obj, i2.obj, R.obj – individual letters for custom layouts, multi‑color printing or mixing sizes
• AMIRI_Spider_Monogram_Complete_Solid_3D_Print.obj – complete spider monogram as one solid piece
• AMIRI_Spider_Monogram_Outer_Frame_Part_3D_Print.obj – outer monogram “frame” piece
• AMIRI_Spider_Monogram_Inner_V_Part_3D_Print.obj – central “V” / heart‑like insert piece to print in a contrasting color

All models are clean, manifold OBJ meshes suitable for high‑resolution FDM or resin printing. They are designed to be scaled easily in your slicer, from small shelf pieces to large wall signs or backdrop logos.

Suggested uses:
• Wall art for bedrooms, closets, studios, barbershops or boutiques
• Shelf or desk logo display for sneakerheads & streetwear collectors
• Event / photo backdrop decor (fashion‑themed parties, content shoots, etc.)
• Multi‑color layered prints using the split spider logo parts

These are generic, safe starting points you can paste and tweak if needed:

File format & scale
• Format: OBJ (can be converted to STL in most slicers)
• Units: millimeters
• Models are easily scalable – for best detail I recommend:
- Text logo: 150–300 mm wide or larger
- Spider monogram: 120 mm tall or larger

FDM (PLA / PETG / ABS)
• Nozzle: 0.4 mm
• Layer height: 0.16–0.20 mm (go down to 0.12 mm for super crisp edges)
• Perimeters: 3–4 walls
• Top / bottom layers: 4–6
• Infill: 10–20 % (grid or gyroid; these are non‑structural decorative parts)
• Orientation:
- Print all logos flat on their back so the front face is perfectly smooth.
- Text letters & word logo should print without supports when laid flat.
- Spider logo parts also print flat without supports.
• Recommended materials: PLA or PETG (easy printing and good surface finish).

Resin printers
• Standard grey resin recommended for easy sanding & painting
• Layer height: 0.03–0.05 mm
• Ensure models are oriented to minimize suction; using light supports on the back side if you don’t print them flat.
• Fully wash and UV‑cure according to your resin manufacturer’s instructions.

Assembly & finishing:
• For the two‑part spider logo, print the outer frame and the central V shape in different colors, then align and glue from the back (CA glue / epoxy).
• For the text logo, you can either print the full word model or position the letters individually in your slicer for custom spacing and sizes.
• To get a “metallic fashion‑store” look:
• Lightly sand the print (220–400 grit)
• Apply a filler/primer spray
• Finish with metallic silver, gunmetal, or gloss black spray paint

Mounting on walls:
• Use double‑sided foam tape, 3M Command strips, or a thin bead of construction adhesive / hot glue depending on wall surface.
• Always test on a hidden spot first to avoid paint damage on walls.

Safety & usage:
• Decorative use only – not food safe, not a toy.
• Contains small parts and sharp edges when scaled down – keep away from small children.
• Do not expose to open flames or very high temperatures (especially PLA).