内河油轮 3D 模型，用于 3D 打印和无线电控制的模型

Hello everyone!
You can see all my models on Instagram - @3drcships
For any questions or suggestions, please email me at - 3drcships@gmail.com

The 3D model is designed for 3D printing, meaning the body is divided into blocks and has grooves for assembly
Also, some small parts are best printed on a photopolymer 3D printer for better quality

Tanker specifications
Scale - 1:100
Length - 141cm
Width - 16.5cm
Height - 25.2cm
3D printing at scale 1:100 requires 2,5kg of plastic
Of course you can change the scale for printing

The 3D model of the ship consists of 123 STL files
The ship's hull consists of 19 main parts and another 104 smaller parts
However, some parts are printed multiple times, so you'll have more than 123 parts

This ship can also be built using radio control. For this purpose, the 3D model includes a removable superstructure for access to the electronics
It's important to note that this ship uses azipods rather than standard propellers. You'll need to purchase azipods specifically for the radio-controlled model
Alternatively, you can drill through the ship's hull and use standard propellers, a shaft, and a rudder

For ship models, it's best to use PETG plastic, especially for radio-controlled models
But PLA plastic can also be used
I recommend printing with a 0.4mm nozzle
The walls should be double-sided, meaning 0.8mm, and the infill should be 15%
For ship assembly, you can use Akfix 702 and 705 glue or solder all the parts with a soldering iron