跳至内容

1:10 比例 2024方程式赛车 - 完全可打印

IMG_7709-mirror-square.jpg 1:10 比例 2024方程式赛车 - 完全可打印
IMG_7698.jpg 1:10 比例 2024方程式赛车 - 完全可打印
IMG_7703.jpg 1:10 比例 2024方程式赛车 - 完全可打印
IMG_7702.jpg 1:10 比例 2024方程式赛车 - 完全可打印
IMG_7701.jpg 1:10 比例 2024方程式赛车 - 完全可打印
IMG_7705.jpg 1:10 比例 2024方程式赛车 - 完全可打印
IMG_7708.jpg 1:10 比例 2024方程式赛车 - 完全可打印
IMG_7709-mirror-square.jpg 1:10 比例 2024方程式赛车 - 完全可打印
IMG_7698.jpg 1:10 比例 2024方程式赛车 - 完全可打印
IMG_7703.jpg 1:10 比例 2024方程式赛车 - 完全可打印
IMG_7702.jpg 1:10 比例 2024方程式赛车 - 完全可打印
IMG_7701.jpg 1:10 比例 2024方程式赛车 - 完全可打印
IMG_7705.jpg 1:10 比例 2024方程式赛车 - 完全可打印
IMG_7708.jpg 1:10 比例 2024方程式赛车 - 完全可打印
提出报价
分享
添加到
Make
?
创作质量： 5/5 （2 投票）
适印性、功能性、清晰度等方面的成员评估
🏆 最佳 ?
许可证
用途
三维设计格式
2 文件 （PDF以及ZIP） 关闭
  • Formula 2024 racecar - By STLLabs.zip
    • 04 - Rear Wing/Exhaust pipe.stl
    • 04 - Rear Wing/Rear Wing Strut.stl
    • 04 - Rear Wing/Rear Wing.stl
    • 05 - Front Suspension/Front Bottom Wishbone L.stl
    • 05 - Front Suspension/Front Bottom Wishbone R.stl
    • 05 - Front Suspension/Front Pull-Rod L.stl
    • 05 - Front Suspension/Front Pull-Rod R.stl
    • 05 - Front Suspension/Front Top Wishbone L.stl
    • 05 - Front Suspension/Front Top Wishbone R.stl
    • 05 - Front Suspension/Front Track-Rod L.stl
    • 05 - Front Suspension/Front Track-Rod R.stl
    • 05 - Front Suspension/Front wheelhub Front L.stl
    • 05 - Front Suspension/Front wheelhub Front R.stl
    • 05 - Front Suspension/Front wheelhub Rear L.stl
    • 05 - Front Suspension/Front wheelhub Rear R.stl
    • 06 - Rear Suspension/Rear Bottom Wishbone L.stl
    • 06 - Rear Suspension/Rear Bottom Wishbone R.stl
    • 06 - Rear Suspension/Rear Push-Rod L.stl
    • 06 - Rear Suspension/Rear Push-Rod R.stl
    • 06 - Rear Suspension/Rear Top Wishbone L.stl
    • 06 - Rear Suspension/Rear Top Wishbone R.stl
    • 06 - Rear Suspension/Rear Track-Rod L.stl
    • 06 - Rear Suspension/Rear Track-Rod R.stl
    • 06 - Rear Suspension/Rear Wheelhub Front L.stl
    • 06 - Rear Suspension/Rear Wheelhub Front R.stl
    • 06 - Rear Suspension/Rear Wheelhub Rear L.stl
    • 06 - Rear Suspension/Rear Wheelhub Rear R.stl
    • 07 - Wheels/Bearing Replacement.stl
    • 07 - Wheels/Front Rim.stl
    • 07 - Wheels/Front Tyre.stl
    • 07 - Wheels/Rear Rim.stl
    • 07 - Wheels/Rear Tyre.stl
    • 07 - Wheels/WheelNut.stl
    • 3mm connector pin.stl
    • 8mm connector pin.stl
    • Formula 2024 - Assembly Guide.pdf
    • 00 - Pre-sliced parts/Floor.3mf
    • 00 - Pre-sliced parts/Front Suspension.3mf
    • 00 - Pre-sliced parts/FrontWing.3mf
    • 00 - Pre-sliced parts/Main Body.3mf
    • 00 - Pre-sliced parts/Rear Suspension.3mf
    • 00 - Pre-sliced parts/Rear Wing.3mf
    • 00 - Pre-sliced parts/Wheels.3mf
    • 01 - Front Wing/Frontwing.stl
    • 01 - Front Wing/Nose Camera L.stl
    • 01 - Front Wing/Nose Camera R.stl
    • 01 - Front Wing/Nose Cone.stl
    • 02 - Floor/Floor back.stl
    • 02 - Floor/Floor Front.stl
    • 02 - Floor/Floor unsplit.stl
    • 02 - Floor/Seat.stl
    • 03 - Main Body/Body Back.stl
    • 03 - Main Body/Body Front.stl
    • 03 - Main Body/Body Unsplit.stl
    • 03 - Main Body/Front Camera.stl
    • 03 - Main Body/Halo.stl
    • 03 - Main Body/HeadRest.stl
    • 03 - Main Body/Mirror L.stl
    • 03 - Main Body/Mirror R.stl
    • 03 - Main Body/Rear Fin.stl
    • 03 - Main Body/Side Camera.stl
    • 03 - Main Body/Steeringwheel Back.stl
    • 03 - Main Body/Steeringwheel Front.stl
    • 03 - Main Body/T-Cam.stl
  • Settings, filament, tips, tricks and a gift!.pdf

了解关于格式的更多信息
最后更新
出版日期
设计编号 2493410
设计者 STLLabs
STLLabs

STLLabs

认证账户
这个设计有问题吗? 报告问题

11 评论

添加评论

👉 登录以撰写消息

11 条评论

stringscutter
stringscutter

excellent job!! do you know where i can purchase the decals for the 1:10 SCALE 2024 FORMULA RACER? thanks!

  • 1 点赞
STLLabs
STLLabs

Thanks, we do not have any decal sets for this. Feel free to make one and share it!
MadzTajmeister
MadzTajmeister

Hi. In the middle of printing and assembling the car. Have to say, the suspension can be a pain to glue in place at times.

Perhaps this could be made easier if the attachment points are made deeper? May also help with the alignment too, i.e. making sure the wheel hubs are level.

It's a nice model still though. Thanks for the effort and sharing.
AirVolt
AirVolt

Hallo, is a possibilitly to purchase a stl datei where all parts are already assamlbed as one model?

  • 1 点赞
STLLabs
STLLabs

Hi, this is not possible. It would be nearly impossible to print as one piece.
AirsoftDevelopmentGroup
AirsoftDevelopmentGroup

Is this based off of the Open RC F1 2024 project?

  • 1 点赞
STLLabs
STLLabs

Nope, completely new design, made as a display model!
fabio-garavaglia
fabio-garavaglia

Great model! Please, add details of panel lines for future models. This huge scale deserve it!

  • 2 点赞
miniflexi
miniflexi

Woooow
😍
😍
😍
😍😍

  • 1 点赞
animatedheaven
animatedheaven

Nice work

  • 1 点赞
FormulaSTL
FormulaSTL

Very good job mate! It seems a good sales model. You deserve it a lot. Good luck and keep on this way

  • 1 点赞
STLLabs
STLLabs

Thanks Buddy!
Mozelia
Mozelia

Nice👍👍❤👌

  • 1 点赞
Yusei_3D_Art
Yusei_3D_Art

Run Run, Epic 😻

  • 2 点赞
designermcults3d
designermcults3d

👏👏👏❤️❤️

  • 3 点赞

您愿意支持 Cults 吗？

您喜欢 Cults 并想帮助我们 继续进行这场独立冒险？要知道我们仅仅是一个 4 组成的小团队，因此支持我们 保持活跃 并 实现未来发展 很简单。以下是 3 种适用于所有人的方法：

  • 广告： 禁用广告拦截器。
  • 捐献： 如果您愿意，可 通过 Ko-Fi 进行捐献 捐赠
  • 口碑： 邀请您的朋友来探索平台，浏览社区分享的众多优秀 3D 文件！

在 Cults3D 上[共享和下载保证了设计仍](/zh/b%C3%B3k%C3%A8/w%C3%A9nzh%C4%81ng/who-owns-3d-printer-file-sites)** 在制作者群体手中！而不是那些拥有竞争平台的3D打印或软件巨头，他们利用这些设计来谋取自己的商业利益。

Cults3D是一个独立、自筹资金的网站，不对任何投资者或品牌负责。网站的几乎所有收入都返还给平台的制作者。网站上发布的内容只服务于作者的利益，而不是那些希望控制 3D建模市场的3D打印机品牌的利益。