GoPro Hero 11 黑色迷你摄像机保护器，适用于 Apex 5 RC / DC 框架 + 底板，固定摄像机倾斜 5 - 40 度

DIGITAL DOWNLOAD ONLY / FULL SHOP ON ETSY: FLYTEC3D

Each design as listed by “FLYTEC3D” has been optimised for strength, durability and fully tested.

PRODUCT SPECIFICATIONS
GoPro Hero 11 Black Mini Camera Protector, designed for the Impulse RC Apex and DC 5 inch frames with fixed camera tilt.

No TPU mount in view of camera lens, clear in both wide and Super wide view and camera lens centre mounted to quad frame

The camera protect case allows you to snap in TBS ND filters or use your own GoPro ND filter in combination, the case has been developed for BANDO type freestyle with extra protection and strength around the lens, body and base attachment to your frame.

Included in your download, X8 variable fixed tilt Baseplates from 5 to 40 degree. PRINT YOUR preferred CAMERA ANGLE.

SETUP AND PARTS: You will need X2 20 mm alloy standoffs and X8 M3 Alloy Steel Hex Socket Cap Head Screw Bolts (NOT SUPPLIED)

YOUR DOWNLOAD
⦁ Print ready (GCODE)
⦁ Original (STL)
⦁ Original ( CURA ) project file/ adjust slicing)

NO POSTAGE COSTS / INSTANT DIGITAL DOWNLOAD / MAKE A 3D PRINTED BACKUP COPY

PRINTING RECOMMENDATIONS
⦁ Sainsmart tpu 95a / Sure Hardness
⦁ Print Nozzle 0.4 mm / For best results

REMOVING PRINT SUPPORT MATERIAL
With most common 3d filament printers there is support material, remove slowly and carefully.

OVERVIEW
FLYTEC3D offers custom FPV drone parts, 3D print ready, instant “DIGITAL” downloads.

HELP AND CUSTOMER SERVICE
Any questions or ideas please do contacts always happy to help.

TERMS & CONDITIONS
Purchasing from “FLYTEC3D” you engage in our “Service” and agree to be bound by the following terms and conditions. An instant “DOWNLOAD LINK” will automatically be sent from Etsy once a purchase has been made. FLYTEC3D can't accept returns, exchanges or cancellations.

DISCLAIMER
FLYTEC3D will not be held responsible for the use and/or misuse of this product.
Any damages to equipment or bodily damage are solely the responsibility of the purchaser.

COPYRIGHT © FLYTEC3D 2022
The owners of the intellectual property and copyrights “FLYTEC3D”. You may not reproduce, republish, modify, copy, transmit, upload, post, or distribute, in any manner, including text, graphics, and code without written permission.

PRINTING RECOMMENDATIONS
⦁ Sainsmart tpu 95a / Sure Hardness
⦁ Print Nozzle 0.4 mm / For best results