10-INCH RACK MOUNT FOR ASUS ASCENT GX10 AI WORKSTATION - Grace Blackwell

PROFESSIONAL 10-INCH RACK MOUNT FOR ASUS ASCENT GX10 AI WORKSTATION
High-quality STL files for 3D printing a precision-engineered 2U rack mount designed specifically for the ASUS Ascent GX10. Perfect for Project MINI RACK builds, homelab AI development, and compact server deployments.
This is a DIGITAL DOWNLOAD - you receive STL files for 3D printing, not a physical product.
═══════════════════════════════════════════
DESIGNED FOR AI WORKLOADS
🔥 OPEN-FRAME THERMAL DESIGN
Engineered for sustained AI workloads with unrestricted airflow around the Ascent GX10. No enclosed box trapping heat during LLM inference or model training.
🔥 SLOTTED VENTILATION FLOOR
Precision horizontal ventilation channels provide structural support WITHOUT blocking bottom intake vents. Maintains optimal airflow during 24/7 operations.
🔥 SOLID PRINT RECOMMENDED
Designed for 100% solid infill ABS or ASA printing. Temperature-stable material essential for proximity to high-performance AI workstation.
═══════════════════════════════════════════
INTEGRATED FEATURES
🔌 HEX CABLE TIE ANCHORS
Extended rear lip with precision hex holes for cable management:
- Thread power cables through for clean routing
- Anchor cable ties for HDMI, DisplayPort, Ethernet, USB cables
- Professional installation without adhesive clips
🔌 REAR POSITIONING LIP
Molded stop prevents over-insertion. Ascent GX10 seats perfectly every time.
🔌 FORM-FITTED RETENTION
Custom-contoured frame for ASUS Ascent GX10 footprint. Friction retention holds unit securely.

3D printing settings
🖨️ RECOMMENDED SETTINGS:
- Material: ABS or ASA (required for heat resistance)
- Layer height: 0.2mm - 0.3mm
- Infill: 100% solid (critical for structural integrity)
- Perimeters: 6+ walls minimum
- Bed temperature: 90-100°C (ABS), 95-100°C (ASA)
- Print temperature: 240-280°C (ABS), 245-285°C (ASA)
- Bed adhesion: Glue stick or ABS slurry recommended
- Enclosure: Highly recommended for ABS/ASA
🖨️ MATERIAL WARNING:
❌ DO NOT print in PLA - softens at 50°C, will warp near workstation
❌ DO NOT print in PETG - insufficient heat resistance for sustained loads
✅ ONLY use ABS or ASA for production use
🖨️ MINIMUM BUILD VOLUME REQUIRED:
- Compatible with: Prusa MK4, Bambu X1C, Voron 2.4, etc.
🖨️ ESTIMATED PRINT TIME:
- 6-10 hours (depending on printer speed)
- Material usage: ~250g ABS/ASA