模块化水培塔式花园系统

Grow vertically and efficiently with this fully modular, support-free 3D-printable hydroponic tower garden system! Designed for ease of assembly, printability, and plant spacing, this system is perfect for home growers, hobbyists, and educators building their own hydroponic setups.

Included Files:

Base

Part A

Part B

Cap

Spreader/Deflector

Threaded Mount

2" Pod Cup

2" Blank Plug (for unused cells)

System Features:

Modular, Stackable Design: Alternate Part A and Part B to build the tower to your desired height. (A and B parts are labeled in the print)

Threaded Assembly: All segments connect using integrated threads—no glue or tools needed. Just screw parts together for quick, secure assembly.

2" Grow Cells: Each grow cell is 2 inches in diameter and angled at 45 degrees to support optimal growth and efficient water flow.

Optimized Tier Rotation: Each tier is rotated 60 degrees from the one below it to maximize spacing, airflow, and light access.

Hydroponic Drip System: Designed for a ½" PVC pipe as the central water delivery line, connected to a submersible pump.

Reservoir Compatible: Fits on top of a standard 5-gallon bucket or your preferred water container.

Custom Cell Use: Use pod cups in active grow sites, and seal unused ones with the included blank plugs.

Support-Free Printing: All components are optimized to print cleanly without the need for support material.

Ideal for herbs, leafy greens, and small fruiting plants, this system offers a scalable, efficient, and clean solution for vertical hydroponic growing. Print only the parts you need and expand your garden as you go!

Use these affiliate links for hardware and supplies!

Pump- https://amzn.to/4jRzG85

Feeder Pipe- https://amzn.to/43oJjoP

Feeder pipe to pump adapter- https://amzn.to/452SA7e

Reservoir- https://amzn.to/4d6v5fu

4in Hole Saw- https://amzn.to/3EKJa5S

Rock Wool Cubes for seed staring- https://amzn.to/451bknG

Vermiculite-https://amzn.to/4jPBAWQ

Digital pH and TDS Meter- https://amzn.to/3GMbB3T

PH Up + Down Control-https://amzn.to/3GIxcu7

Liquid Nutrients- https://amzn.to/44wwAS8

Grow lights for indoor gardens- https://amzn.to/3F1tWt8

Smart Plugs for light timers- https://amzn.to/3F5vUZv

Certified Food Grade PETG- https://amzn.to/4j5n63Y

Assembly Instructions
Parts to Print:

1× Base

1x Part A

1× Threaded Mount

1× Nut

1× Cap

1× Spreader/Deflector

As many Part B segments as needed

Pod Cups (for each active cell)

Blank Plugs (for any unused cells)

Assembly Steps:

Prepare the Reservoir:
Cut a 4-inch hole in the center of the lid of a sturdy 5-gallon bucket.

Install the Base Mount:
Thread the Threaded Mount into the bottom of the Base. You may apply glue for a permanent joint.
Feed the mount through the hole in the bucket lid and secure it using the Nut from below.

Stack the Grow Segments:
Thread Part A in to the base. Stack as many Part B pieces as you like, threading them together in your desired height configuration.
Screw the Spreader/Deflector onto the topmost grow segment.

Set Up the Water System:
Place your submersible water pump in the bucket and connect it to a ½" PVC Feeder Pipe using the proper fitting.
Place the lid (with the base mounted) back onto the bucket.
Thread your A and B tower segments onto the base, guiding the feeder pipe through the center of the spreader as you go.

Cut Feeder Pipe to Length:
Trim the feeder pipe so that it extends about 1 inch above the spreader.

Cap the Tower:
Screw on the Cap to finish the assembly.

Install Pods or Plugs:
Insert Pod Cups into active grow cells. Seal any unused cells with Blank Plugs.

🎉 Your Modular Hydroponic Tower Garden System is now fully assembled and ready to grow!