架子 04 - 带墙壁托架

Only one shelf.

However, due to the possibilities of 3D printing, a little more functionality added ;-)

-The feet are printed separately and then glued on.

When the feet are glued on, the design is stackable.

-The optional inner parts are printed separately (normal mode or vase mode possible). I have printed in vase mode.

-With the shelf brackets, the shelves can be removed when they are not needed,

can also be stowed away to save space,

or possibly also be used as a wall shelf.

If you are considering using it as a shelf and want a permanent connection between the shelf and bracket, use adhesive/double-sided adhesive tape between the components.

-If you prefer a detachable connection, additional 8x3mm or 8x2mm magnets can also be glued into the shelves and shelf brackets. Add several magnets - depending on your personal preference.

-The shelf brackets can be glued or screwed to a surface.

If required, the screw heads can be concealed with the printed cover caps.

Base area of the largest part to be printed: X/Y: 180/90mm

If you like my design, I look forward to a "like" and/or your make.

Have a look at my other designs:

click here

If you like, buy me a coffee:

Coffee

-nothing special, no supports required

-the inner parts can be printed either in normal mode or in vase mode (which is how I did it)